One of Lexus’ most recent safety monitoring systems, Blind Spot Monitor (BSM), uses radar sensors to continuously scan the area in the driver’s blind spot for the presence of other vehicles.
In This Article...
What does the BSM alert sign mean?
Have you ever attempted to change lanes only to suddenly realize that a car was in your blind spot? These near misses are common and can be dangerous. Radars positioned in the rear bumper of the Mazda are used for Blind Spot Monitoring (BSM), which helps drivers see cars in their blind spots and in the adjacent lane. By showing an indicator in the relevant door mirror, it notifies drivers when a car is in their blind zone on either side. The icon flashes and a warning beep is heard if the driver signals to change lanes while a vehicle is in the blind area.
*The system may be affected by a number of factors, including road conditions, approaching vehicles’ speeds (approaching vehicles often drive in parallel for a while), and weather (rain, snow, etc). (the road width is extremely narrow or wide)
*Always visually scan the environment around you before making a lane shift. When changing lanes, the system is only intended to help you scan for vehicles behind you. Even when a vehicle is in the next driving lane, the BSM warning light may not flash or it may flash later due to some restrictions with the operation of this system. Always make it your duty as a motorist to look behind you.
RCTA (Rear Cross Traffic Alert)
Have you ever had to abruptly apply the brakes while reversing out of a parking place because you failed to notice a car approaching from the side? Rear Cross Traffic Alert (RCTA) is intended to assist you in determining if it is secure to begin backing up. The system monitors for vehicles approaching from both sides and notifies the driver when they are close by using the same radars and indicators as BSM.
*When reversing, RCTA can detect oncoming vehicles and flashes the icon in the door mirror and sounds a warning beep. Before actually putting the car in reverse, always give the region a visual check. In contrast to dealer-installed parking sensors, which trigger an alarm when they spot nearby stationary objects, RCTA operates differently.
The Lexus Blind Spot Monitor: what is it?
It’s crucial to understand the safety features your car is outfitted with and how they interact with you while driving because there will be a lot of people traveling over the next couple of weeks. Every Lexus vehicle includes the Lexus Safety System+, a collection of industry-leading safety features. As you begin to plan your holiday travel, let’s go over a few of the safety features that come standard in your Lexus so you can better understand your car.
Blind Spot Monitor with Rear Cross-Traffic Alert
A Blind Spot Monitor with Rear Cross-Traffic Alert is standard equipment on any Lexus vehicle that has the Lexus Safety System+ installed. The Blind Spot Monitor is intended to alert you to any coming or passing objects or vehicles that may be in one of your blind spots. When backing out of your driveway or parking space, Rear Cross-Traffic Alert helps you by alerting you if any objects or moving cars are approaching from the rear.
Intuitive Parking Assist
The ability to park your Lexus vehicle has never been simpler thanks to the optional Intuitive Parking Assist. When attempting to park, Intuitive Parking Assist makes use of sensors to locate nearby stationary objects and their closeness to your car.
Rear Pedestrian Detection
This optional safety function was designed and configured to assist in detecting a pedestrian or anything that may occasionally be behind your Lexus car. If the system foresees a potential accident, it will issue an auditory and visual notice. In some circumstances, if the driver is not aware of their surroundings, the system may even apply gentle braking to prevent the crash.
How do I reactivate my blind spot detection?
We’re sorry to hear that your Corolla’s blind-spot monitor is giving you trouble. When the extra luxuries that are supposed to make your life easier stop working, there is nothing more aggravating.
You need to take the following actions in order to reset a Toyota blind-spot monitor:
Find the sensor for blind spot monitoring. This is often located on the interior left and right sides of the rear bumper.
Look to check whether there is any mud, dirt, or debris on it. These components are prone to collecting dirt and other grimy materials. Ensure that you clean it thoroughly.
Turn off the engine of your car and wait a moment. Try turning on your car and giving it a moment to re-calibrate after a brief delay.
The machine will reboot and reset once you’ve completed all of these steps, and the problems should disappear. You might wish to take your automobile to your neighborhood Toyota dealership or technician if the problem is still persistent so they can investigate it further.
Making sure your car is in working order can occasionally be a necessary evil. It shouldn’t feel that way when looking for the best auto insurance to support you and make sure you’re adequately taken care of. In addition to helping you locate the appropriate insurance for your Toyota Corolla, Jerry, the car insurance super app, may also help you save a ton of money on your insurance!
Jerry will compare and shop around for rates and coverages that not only fit your criteria but also at the best rates available, with 50+ top name brand insurance carriers to select from.
Within two minutes or less, Jerry users are delighted with substantial savings. Jerry streamlines and effectively manages the process of finding vehicle insurance, saving the typical Jerry user $887 annually!
How can I turn off BSM?
Toggle the BSM setting on or off by going to the MID’s Settings screen, where it may be found. Please be aware that BSM2 and RCTA3 cannot be separately enabled or disabled on some vehicles. The BSM2 system may be activated and deactivated in some vehicles using a specific physical button on the dashboard.
Where is the blind spot sensor located?
Two radar-based sensors are housed inside the rear bumper fascia of the car and are used by the Blind Spot Monitoring (BSM) system to identify vehicles with a highway license (automobiles, trucks, motorcycles, etc.)
Is blind-spot surveillance required?
A backup camera is unquestionably a helpful safety device when there are young children present, and it can also assist you park and minimize property damage. As of the 2019 model year, the government will mandate their installation on all passenger vehicles. They are currently commonly included as standard equipment. The fact of cameras is that the more the better. Any car’s blind spot is a problem, but it’s not the only one. The 360-degree camera system we originally saw on a 2008 Infiniti EX35, which appears to miraculously reveal your vehicle and its surroundings from above you, immediately captured our attention.
Is blind spot monitoring reliable?
Blind spot monitors probably won’t help you if you’re always stuck in low-speed traffic jams or one-lane roads. Finally, we believe that before you order the monitors for your next vehicle, you should put them to the test. Test-drive a car with the monitors installed to determine if you like them.
Can a Lexus self-park?
Even the most skilled drivers struggle to parallel park. What about a vehicle that claims to park itself? The new $75,000 Lexus LS, according to Toyota’s Lexus Division, can accomplish this. Consumer Reports’ automotive specialists evaluated it to see if it could help unlucky parkers into a tight space.
Thanks to its technology that allows the car to allegedly practically park itself, the 2019 Lexus LS promises to save the day when it comes time to execute a parallel parking.
Consumer Reports’ Jake Fisher tested the automatic parking function. According to his feedback, he lined up to the front of the vehicle as one would typically do when parallel parking, put the vehicle in reverse, and then selected the parallel park feature. He indicated the location of the parking spot he truly desired. And when the screen turned green, he was astounded that he hit okay without moving his hands.
Those that struggle with parking are undoubtedly the target audience for the feature. In order to test it out, Consumer Reports hired Ina Gozenpud, a self-described “parallel-parking disaster.”
She said that she could not actually park her automobile. However, after 20 minutes of wrangling, Jake determined that Gozenpud should make an attempt to park the Lexus.
They initially struggle with how close the car should be to the curb. However, once Gozenpud got the hang of it, the Lexus did deliver, slipping into the slot only a few inches from the kerb.
But according to Fisher, operating the electronics can be a little challenging. The self-parking option, he said, is actually for someone who feels more at ease setting up their iPod than backing into a parallel space.
Consumer Reports claims that the $75,000 Lexus LS still has more to offer than just a fantastic self-parking technology. Thanks to its 380 horsepower and the first eight-speed automatic transmission, it performed quite well in tests.
Early in the 1980s, the Lexus brand was created, and it was introduced in 1989. It quickly came to be associated with excellent quality, luxury, and client delight. Only 12 years after its founding, the brand grew steadily to become the best-selling line of luxury automobiles in America.
Lexus is a member of the global Toyota family, which collectively makes up the third-largest carmaker in the world.
What features does the Lexus safety system have?
Pre-Collision System with Pedestrian Detection is a feature of the Lexus Safety System+. Your Lexus will be able to identify a person, another car, or other objects in its path thanks to this special technology. Your car is built to employ Brake Assist to apply the brakes for you if it senses that a frontal collision is likely.
How much does a Blind Spot Monitor repair cost?
The double whammy of driver-assistance technologies that promise to steer, brake, and alert drivers of impending collisions. They not only cost a lot to purchase new, but they can also cost a lot more to replace in an accident, according to a recent AAA analysis.
It can cost between $850 and $2050 to replace radar sensors implanted in back bumpers, such as those used for blind-spot monitoring. Front radar sensors typically cost between $900 and $1300 and are installed inside the bumper and behind grilles. Do you enjoy when your car alerts you to your approach to a curb with a beep? The cost to replace parking sensors varies from $500 to $1300 per bumper. Visual cameras range in price from $500 to $1100, depending on how many targets you’ve hit.
If you’re unable to pay, high-deductible insurance coverage may potentially hit you. One third of Americans, according to AAA, say they cannot afford repairs that cost less than $500. But shouldn’t insurance providers offer discounts for vehicles with such cutting-edge safety equipment, just like they do for vehicles with airbags and ABS? Unfortunately, Paul informed us, increased rates are already “baked into the car” because these technologies are still in their infancy.
Nobody mentions that these automobiles might be remarkably effective at preventing collisions, he added. “All you can do is look at what it costs to fix it until you can gather more evidence to establish that these systems are truly lowering crashes,”