The Vehicle Stability Control (VSC) warning light signals a problem with your traction control system, which will result in a temporary loss of VSC and ABS functionality. Additionally, it can show up if you unintentionally pressed the VSC button.
Vehicle stability control, or VSC, is how Toyota and Lexus handle traction control. By lowering the power applied to your wheels, traction control aids in maintaining traction.
The VSC and ABS collaborate. Snow might obstruct the ABS sensors when you’re driving in blizzard conditions, turning on the check VSC system light.
Upon noticing the “When you see the VSC OFF indication on your dashboard, it implies that your traction control is entirely disabled and won’t activate if you lose traction.
Those who drive more recent vehicles can also view the “Instead of the VSC light, check the VSC system Light message on your dashboard.
In This Article...
When the VSC light is on, can you drive?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
How much does it cost to fix a Lexus’ VSC?
Lexus VSC repairs would cost between $200 and $300. But that depends on what made the light come on. Vsc collaborates with the ABS and other auto parts.
C1201:
The two P0 codes indicate that the emissions system has a leak. Technically, it might be in the charcoal canister or filler neck, but most of the time it’s just a leaky gas cap. Either a worn-out cap or one that was put incorrectly.
The car is instructed to switch on the check engine light and turn off the traction and VSC by the C1201 code. In essence, this code is responsible for alerting you to an issue when the other two appear. Since they are the ones that created it, fixing the other codes should also repair this one.
Why do my Lexus’s VSC and check engine lights come on?
In a Lexus or Toyota, the following are the most typical causes of simultaneous illumination of the VSC Off and check engine lights: defective or damaged gas cap. defective O2 sensor
How do I repair my Lexus’s VSC?
Try resetting the VSC light as an easy remedy. Maybe the VSC light was merely intermittently on due to some issue. Try these to try to reset your VSC light:
- Put the gear in Park and come to a stop.
- Search for the VSC button. Depending on the model of your car, it may be at the steering wheel or behind it, although it is frequently close to the gear stick.
- For a few seconds, press and hold the VSC button.
- The TRAC OFF and VSC OFF indication lights will now turn on, as you can see. The VSC system and traction are both currently disabled.
- For a second, press the VSC button once more. The systems are now reengaged as the TRAC and VSC lights both disappear.
If this doesn’t solve the issue, you should examine the trouble codes and conduct proper troubleshooting. If you don’t have the skills to do it yourself, take your car to a shop.
How do I turn off my Lexus’s check VSC light?
Pressing and holding the TRAC/VSC switch when the automobile is stopped for more than three seconds will turn these systems off. The multi-information display should then display “Traction Control Turned Off” and the VSC OFF indicator light should turn on.
What location does the VSC button have?
To switch off your TRAC, just push and hold the VSC Off button next to your gear shift. Near your speedometer, look for the TRAC OFF indication light. You will also find your VSC Off indication light here. Simply press the button once more to turn the TRAC back on.
Why does VSC appear on my dashboard?
Vehicle stability control, or VSC for short, is an electronic system intended to lessen the loss of vehicle control by monitoring the steering direction and the actual direction of the vehicle. The system then applies braking force and may even reduce power to particular wheels in an effort to stop a skid.
What does it cost to repair the VSA system?
The VSA system repair typically costs between $80 and $90. The average price for Honda is this amount. With labor expenses ranging from $38 to $48 and parts costing about $43,
Author: DJ
Automotive technician Dave Junior has practical experience servicing, diagnosing, and repairing both domestic and foreign vehicles. He takes pleasure in writing and disseminating his knowledge.