Lexus Maintenance Light Reset
- Start your car’s engine.
- Depending on the model, switch your odometer/trip display to ODO mode or TRIP A mode.
- Switch off the ignition.
- Turning the ignition switch back on while holding down the Trip Meter Reset button.
- Watch for the maintenance light to start blinking, then solidify before turning off.
In This Article...
Why does my Lexus indicate that maintenance is needed?
When the Lexus Maintenance Required light on your dashboard illuminates, it indicates that your car needs an oil change, a tire rotation, or other type of standard maintenance. Depending on your Lexus model, this typically happens every 3,500 to 5,000 kilometers.
Why does my maintenance light come on after I change the oil?
Second, restarting the counter after changing the oil involves resetting the maintenance required light. As a consequence, you may travel securely on roads and you won’t need to manually count the miles since after 5,000 miles, this light will alert you that it’s time for a fresh oil change.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
On a Lexus, where is the TPMS reset button?
Start the car, then wait for 20 minutes. Consult your handbook if you’re having problems locating the reset button. Typically, it’s under the steering wheel.
What does the Lexus GS 350’s check system mean?
If your Lexus GS 350’s check engine light begins to blink, the issue requires quick attention, and you should bring the car in right away. A flashing light signals a persistent issue that, if not addressed right away, could cause significant harm to the vehicle.