- Start your car’s engine.
- Depending on the model, switch your odometer/trip display to ODO mode or TRIP A mode.
- Switch off the ignition.
- Turning the ignition switch back on while holding down the Trip Meter Reset button.
- Watch for the maintenance light to start blinking, then solidify before turning off.
In This Article...
How do you reset a Lexus’s maintenance schedule?
How to Turn Off the Maintenance Light on a Lexus
- Start your car’s engine.
- Hold the Trip Meter Reset button while turning the ignition back on after shutting it off.
- The Lexus Maintenance Required light will then stop blinking and turn solid.
Why does my Lexus indicate that maintenance is needed?
When the Lexus Maintenance Required light on your dashboard illuminates, it indicates that your car needs an oil change, a tire rotation, or other type of standard maintenance. Depending on your Lexus model, this typically happens every 3,500 to 5,000 kilometers.
Why does my car indicate maintenance is needed following an oil change?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
- Now the light will read “MAINT REQD.”
- Press and hold the ODO reset / readout button while the engine is off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can I clear the maintenance message on my Toyota?
Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off. Start the vehicle after releasing the odometer button.