The lock/unlock method cannot be used when a key is being replaced or when a new spare is being obtained. The new fob will need to be software-programmed instead. Before we begin, let’s take a moment to pause. A new key fob needs to be programmed using specialist tools. You require an OBD2-to-USB cable in particular, and it must support the VIM communication protocol. A functional key remote is also required. The method won’t function without each of these resources. The good thing is that you can always visit a licensed mechanic with the new key. Even though you’ll be charged for a service, you can rely on it working because they’ll have the necessary tools.
The Toyota TIS Techstream software will first need to be installed on your computer. Technically, you can accomplish this with any Windows machine, but a laptop will make things lot simpler. In the end, a cable will connect the car and the computer directly.
You’re going to use your OBD2 cable to connect the car to the laptop since your software is already installed and operational. You need to push the Engine Start button twice without depressing the gas pedal in order to get the two talking to one another. Without actually starting the engine, this will activate the vehicle’s computer.
You ought to have the option to connect to your car in your TechSTream program. Your car will be automatically detected by the program, and you may use the information that is shown to verify that your connection is strong.
The main menu is now visible on the screen. You should utilize it to access Smart Access. You then choose Utility, followed by Smart Code Registration.
obey the directions displayed on the screen. They will guide you through the registration process for the new fob. Both keys will be required for a number of processes that must be completed before the new fob can be registered and used. You must register each key one at a time if you need to register more than one.
In This Article...
How is a smart key programmed?
Process for Programming a Toyota Key Fob
- The Toyota’s driver’s seat is where you should be.
- From “off” to “on,” turn your key in the ignition.
- Within five seconds, quickly turn your ignition key from “off” to “on” again.
- Your ignition key needs to be removed.
- Close and reopen the driver’s door twice in the next 40 seconds.
Is it possible to program a Lexus key?
Replacement Lexus keys are available at the dealership or with the help of a competent locksmith in your region.
The primary distinction between the two is that a car locksmith will come to you, whereas you must tow your car to the dealer to get a key created there.
Program a Lexus Key
Lexus auto keys and fobs are available from local locksmiths, online, or in the parts department of a Lexus dealer near you.
You still need to cut the blade, program the transponder chip, and enable the remote/keyless functionality after purchasing a replacement key or Lexus fob.
A Lexus smart key must be programmed using diagnostic equipment. Customers who only had one key and decided to order a spare online might need to get in touch with a local automotive locksmith to have the key cut and programmed.
Lexus Key Replacement Cost
There are four different price ranges for a locksmith to replace a lost Lexus key.
- 19901997 ($120150) (basic key, no chip
- 19972003 (Early transponder, Requires a new ECU or Reflash of existing) $280$400
How is a key reprogrammed?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- In order to test your new key, start the engine.
- Thirdly, repeat the procedure.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- To program the key, turn it back to the on position.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
The cost of a brand-new Lexus key fob
Getting a replacement for a vehicle key fob that has broken down can be expensive and time-consuming. If you drive a Lexus or another high-end car, the cost can be higher than you anticipate. Losing your key fob can also be an expensive mistake, but with enough preparation and information, none of these situations needs to be a major source of anxiety for you.
Start by examining the battery and button functionality of the key fob before considering replacement. If you’ve had your automobile for a while, a dead battery might only need to be replaced. Additionally, the buttons may become stuck or cease to operate due to normal wear and use. The simplest form of replacement is this one. The “guts” of your key fob can be swapped out for a newer model for less than $50 if you buy a replacement key fob shell from one of the many online retailers. Install a new battery at the same time; it will only cost you about $6. You can use your updated fob immediately.
If you believe the problem with your fob extends beyond normal wear and tear, you should contact your local Lexus dealer or a locksmith that is certified to provide new key and fob services. Both options need you to have your identification, vehicle registration, ownership documentation, and VIN on hand. Getting a full key fob replacement is just the start because luxury car brands are so technologically advanced. To program your fob and make sure it functions exactly as well as the original, you also need the correct help. The about $375 cost of each replacement key fob may be paid if you go via a dealership and your car is still covered by warranty. If your key has been lost and you’re locked out, consider dealing with a locksmith. You can take advantage of their emergency service hours and the price may be slightly less than a dealership. Your insurer or a roadside assistance provider may be able to compensate you for their services.
Can a key fob be programmed without visiting the dealership?
The programming process is detailed in the owner’s manual for the vehicle, but the vehicle must be present, he added. Be advised that most customer-programmable key fobs, regardless of brand, require two active, functional keys in order to program a third new key without visiting the dealer, according to Yu.
AutoZone reprogrammes automobile keys, right?
AutoZone is truly your one-stop shop for all of your auto key needs because they specialize in creating keys for almost any make or model. You may get ordinary ignition key blanks cut for your car for between $2.50 and $6.00 if it is more than 20 years old.
AutoZone can provide you with a key and program it for your car at a fraction of the cost of a dealership if you have a newer vehicle that employs a transponder key (recognized by a black plastic key-head).
Without my original car key, how can I program my new one?
If you purchased a new key from the dealer, follow these easy steps to program your transponder key without the original key. Only some car models will be compatible with this, and occasionally you may require more sophisticated diagnostic equipment. But before phoning your authorized dealer, you might want to attempt these simple and cost-free methods.
Turn on Ignition
Put the key in the ignition while seated in the driver’s seat. Position the ignition so that it is ON. There should be a security light on.
There might be an issue with the car battery if you can’t see the security light. Check the voltage and, if necessary, charge it.
To guarantee that the voltage will remain constant throughout the procedure, use a car battery charger.
Wait
For 15 minutes, the security light must be on. If you want to program the key, do not touch the system for at least 15 minutes.
You could pause the timer and go outside. After all, you have plenty of things you can do while you wait for 15 minutes.
Switch Off and On
After 15 minutes, the security light ought to turn off. Keep a tight eye on it; you’ve got three minutes to get back to the key after this.
Reverse the key’s direction such that it is now in the ON position. Once more, the security lamp will be on for 15 minutes.
Repeat Steps
At around 15 minutes, the security light will turn on once more. The steps from the previous stage will be repeated by you. Restart the key by turning it off and on.
This ought to turn on the security light once more. You might be getting tired now, with only another fifteen minutes to wait. But this ought to be the last time you have to take this action. These easy steps should produce the key and have it ready to use in 45 minutes. Make sure the key starts the car by testing it. Just remember that the original key won’t work anymore. It won’t operate if you happen to discover it after programming a new key.
How can I program the key for my 2008 Lexus RX 350?
2. UNLOCK and OPEN the driver-side door. CLOSE the trunk and all other doors.
3. Put the key in the ignition and pull it out twice in the space of five seconds.
4. DOUBLE-CLOSE and DOUBLE-OPEN the driver-side door.
5. Turn the key in the ignition, then take it out.
6. DOUBLE-CLOSE and DOUBLE-OPEN the driver-side door.
7. Place the key in the ignition and keep it there.
8. SLIP the driver-side door shut.
9. Start the ignition and then turn it off.
10. REMOVE the ignition key.
11. The door locks will now cycle to show that the car has entered programming mode successfully.
12. When programming the first remote, PUSH and HOLD the LOCK and UNLOCK buttons for 1.5 seconds. As soon as you release, push and hold the lock button for two seconds.
13. To verify that the remote was successfully programmed, the door locks will cycle. Repeat steps 12 and 13 if you need to program any additional remotes. If not, move on to step 14.
14. OPEN the door on the driver’s side. The programming is now over.
Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.
Why doesn’t my automobile recognize my key?
The key fob won’t be recognized by your car because the remote’s battery is dead. The actual remote is damaged or is no longer programmed to your vehicle. Low automobile battery voltage. The keyless entry system has to be fixed.
Does my key fob require reprogramming after a battery change?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.