The lock/unlock method cannot be used when a key is being replaced or when a new spare is being obtained. The new fob will need to be software-programmed instead. Before we begin, let’s take a moment to pause. A new key fob needs to be programmed using specialist tools. You require an OBD2-to-USB cable in particular, and it must support the VIM communication protocol. A functional key remote is also required. The method won’t function without each of these resources. The good thing is that you can always visit a licensed mechanic with the new key. Even if you’ll be compensated for a service, you can rely on it working because they’ll have the necessary tools.
The Toyota TIS Techstream program will first need to be installed on your computer. Technically, you can accomplish this with any Windows machine, but a laptop will make things lot simpler. In the end, a cable will connect the car and the computer directly.
You’re going to use your OBD2 cable to connect the car to the laptop since your software is already installed and operational. You need to press the Engine Start button twice without depressing the gas pedal in order to get the two talking to one another. Without actually starting the engine, this will activate the vehicle’s computer.
You ought to have the option to connect to your car in your TechSTream software. Your car will be automatically detected by the program, and you may use the information that is shown to verify that your connection is strong.
The main menu is now visible on the screen. You should utilize it to access Smart Access. You then choose Utility, followed by Smart Code Registration.
obey the directions displayed on the screen. They will guide you through the registration process for the new fob. Both keys will be required for a number of processes that must be completed before the new fob can be registered and used. You must register each key one at a time if you need to register more than one.
In This Article...
The cost of a brand-new Lexus key fob
Getting a replacement for a vehicle key fob that has broken down can be expensive and time-consuming. If you drive a Lexus or another high-end car, the cost can be higher than you anticipate. Losing your key fob can also be an expensive mistake, but with enough preparation and information, none of these situations needs to be a major source of anxiety for you.
Start by examining the battery and button functionality of the key fob before considering replacement. If you’ve had your automobile for a while, a dead battery might only need to be replaced. Additionally, the buttons may become stuck or cease to operate due to normal wear and use. The simplest form of replacement is this one. The “guts” of your key fob can be swapped out for a newer model for less than $50 if you buy a replacement key fob shell from one of the many online retailers. Install a new battery at the same time; it will only cost you roughly $6. You can use your updated fob immediately.
If you believe the problem with your fob extends beyond normal wear and tear, you should contact your local Lexus dealer or a locksmith that is certified to provide new key and fob services. Both options need you to have your identification, vehicle registration, ownership documentation, and VIN on hand. Getting a full key fob replacement is just the start because luxury car brands are so technologically advanced. To program your fob and make sure it functions exactly as well as the original, you also need the correct help. The about $375 cost of each replacement key fob may be paid if you go via a dealership and your car is still covered by warranty. Consider hiring a locksmith if you’ve lost your key and are locked out. You can take advantage of their emergency service hours and the price may be slightly less than a dealership. Your insurer or a roadside assistance provider may be able to compensate you for their services.
If I change the battery, do I need to reprogram my key fob?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
Is it possible to program a Lexus key?
Replacement Lexus keys are available at the dealership or with the help of a competent locksmith in your region.
The primary distinction between the two is that a car locksmith will come to you, whereas you must tow your car to the dealer to get a key created there.
Program a Lexus Key
Lexus auto keys and fobs are available from local locksmiths, online, or in the parts department of a Lexus dealer near you.
You still need to cut the blade, program the transponder chip, and enable the remote/keyless functionality after purchasing a replacement key or Lexus fob.
A Lexus smart key must be programmed using diagnostic equipment. Customers who only had one key and decided to order a spare online might need to get in touch with a local automotive locksmith to have the key cut and programmed.
Lexus Key Replacement Cost
There are four different price ranges for a locksmith to replace a lost Lexus key.
- 19901997 ($120150) (basic key, no chip
- 19972003 (Early transponder, Requires a new ECU or Reflash of existing) $280$400
Can you reconfigure a key fob?
I’m here. As long as the key is the same for each vehicle, you can reprogram a key fob to work with that vehicle. In this situation, if the key can open the doors, you would need to take the following actions:
- Turn the key to the ON position after inserting it into the ignition.
- Remove the ignition switch’s key.
- In the OFF position, turn the key.
- the driver door with the key.
- Put the key in the ignition switch and attempt to start the engine if the doors will lock.
- The key fob’s battery should be removed and then replaced (unless you put in a new battery)
- After unplugging the vehicle’s battery wires, wait 30 seconds, then reconnect them (reset computer).
- Try using the remote to unlock the doors while the door is closed after taking the key out of the lock.
- While simultaneously using the remote and your hand to unlock the door, turn the key to the ON position.
- Locking the door simultaneously with your hand and the remote requires turning the key to the ON position.
- Push the lock and unlock buttons on the key fob simultaneously with locking and unlocking the door with the key – (do this 3 times).
After completing these procedures, the key fob has been successfully reprogrammed to your car if the engine starts. If the key does not lock the doors or start the engine, it may be completely different, and you will need to get a new key. Seek out a specialist, like one from Your Mechanic, if you require more help with your keyless entry system.
How is a key fob for a 2009 Lexus RX 350 programmed?
2. UNLOCK and OPEN the driver-side door. CLOSE the trunk and all other doors.
3. Put the key in the ignition and pull it out twice in the space of five seconds.
4. DOUBLE-CLOSE and DOUBLE-OPEN the driver-side door.
5. Turn the key in the ignition, then take it out.
6. DOUBLE-CLOSE and DOUBLE-OPEN the driver-side door.
7. Place the key in the ignition and keep it there.
8. SLIP the driver-side door shut.
9. Start the ignition and then turn it off.
10. REMOVE the ignition key.
11. The door locks will now cycle to show that the car has entered programming mode successfully.
12. When programming the first remote, PUSH and HOLD the LOCK and UNLOCK buttons for 1.5 seconds. As soon as you release, push and hold the lock button for two seconds.
13. To verify that the remote was successfully programmed, the door locks will cycle. Repeat steps 12 and 13 if you need to program any additional remotes. If not, move on to step 14.
14. OPEN the door on the driver’s side. The programming is now over.
Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.
Can my Lexus have remote starting added?
Remote start and security features can only be added to Lexus vehicles manufactured in 2020 or earlier (newer models also covered). Remote starting with the OEM remote fob or Compustar remote does not require a subscription. It is compatible with the majority of Lexus model years, including the ES, GS, IS, LC, LX, NX, RX, and UX.
Is there a remote start app for Lexus?
Using your phone, you may start the engine, lock and unlock the doors, and even grant remote access to other people. Never again misplace your keys. Utilize the Lexus app to obtain directions sent from your car to your smartphone so you can complete the remaining phases of the journey.
Can a key fob be programmed without visiting the dealership?
The programming process is detailed in the owner’s manual for the vehicle, but the vehicle must be present, he added. Be advised that most customer-programmable key fobs, regardless of brand, require two active, functional keys in order to program a third new key without visiting the dealer, according to Yu.
How much will it cost to program my key fob?
Typically, key fob programming costs between $85 and $400. Nowadays, most cars come standard with key fobs, also referred to as remote fobs. An additional remote fob with buttons that may lock and unlock the vehicle from the outside, the trunk, or the back hatch is included with car keys.
How much is the key programming service at AutoZone?
Without an appointment and for a lot less moneytypically $20 to $90than a dealership, AutoZone creates and programs transponder keys. For a wide range of automobiles, including Toyota, Ford, Dodge, Honda, Mercedes, GMC, and others, they may create transponder keys.
Transponder keys, commonly referred to as chipped keys, are unique keys that contain an RFID chip. These chips have a distinctive code that is read by a receiver in the ignition of the vehicle. When the key is turned, the engine won’t start if the code matches the receiver’s code.
This increases security and guarantees that only programmed keys may start the car.
An estimated 70% of automobiles on the road today utilize a transponder key, and if you own a car produced in the 2000s, you most certainly have one as well. You can usually recognize these keys by their black plastic head.
Transponder key programming and cutting may be very expensive when done by a dealership, sometimes costing hundreds of dollars per key.
But when it comes to transponder keys, AutoZone really is a blessing in disguise because you can typically order one for less than $100.