The majority of auto supply shops have one or two products that are especially made for cleaning headlight lenses after they have become fogged up from UV exposure. Look for items labeled “headlight lens restoration” or “headlight restoration kit.” Cleaning your car’s cloudy headlights is simple when you use these products.
People who urgently want the cleaning of cloudy headlights have a few alternative solutions that work just as well. Headlights may be cleaned well using toothpaste and baking soda. Both treatments are sufficiently abrasive to remove the fog without damaging or scratching the headlights. It’s possible that polishing agents like Rain-X will work well to repair UV damage. In general, it’s a good idea to keep cleaning supplies in your house or garage!
In This Article...
How are headlights that are dirty, foggy, and yellow cleaned?
Do you have dim, yellow headlights? There are three quick ways to clean and polish them.
The few stray gray hairs in a gorgeous brunette head of hair are similar to dull, yellowed headlights. They could cost you if you’re wanting to sell or trade in your vehicle because they immediately reveal a car’s true age. There are four solutions provided by E3 Spark Plugs to get rid of the yellow on your car and brighten up the headlights.
- It turns out that toothpaste can be used as a bit of a panacea. It can remove water stains from your coffee table, scuffs from your shoes, and your toddler’s crayon masterpiece from the wall in your living room. Additionally, it might help brighten up your car’s fading headlights. Utilizing a soft, dry cloth and some toothpaste, rub your headlights in a circular motion. Clean with a moist cloth after rinsing with water.
- Wash your headlights with soap and water, then dry them. Aluminum Polishing Compound Use a soft, dry cloth to spread a little amount of aluminum polishing compound, which is easily accessible at most hardware and auto supply stores, on the headlights. It will look foggy as it self-dries. Wipe away the haze with a fresh cloth. Before your headlights are sparkling clear once more, you might need to repeat the procedure a few times.
- Wet/dry 800-, 1,000, and 2,000-grit sandpaper pads, lubrication, cleaning polish, and wax sealant are all need for the sandpaper-to-sealant process. To prevent scratches, tape off the paint around the headlights of your car. Apply the lubricant to the 800-grit sandpaper pad and the headlight covers, then scrub the covers until you start to see the yellow film start to lift. Use the 1,000-grit, then the 2,000-grit sandpaper pads to repeat the process. Use a cleanser like Rain-X to clean your headlights, then buff it off after it has dried naturally. Apply a sealer after doing the same with a plastic polish.
Do you know of a better way to make the headlights on your vehicle shine? Post it on the Facebook fan page for E3 Spark Plugs.
Will WD 40 remove a headlight’s haze?
If you’re wondering if you can fast defog your headlights for approval before a car test, the answer is yes! It can be applied to clean car headlights. However, you shouldn’t consistently use WD-40 to restore your headlights because in the long run, it might do more harm than good.
If used frequently, the oil may leak into the headlight bulb itself, causing blurriness or burnout. So, once the fog has cleared, it is advised to wash the lubricant off with mild automotive soap.
Headlights can Magic Eraser be cleaned?
Cleaning hazy headlights using a Magic Eraser is totally safe, even though using it on a car’s paint has become somewhat of a cautionary tale. a perk? The cleaning tool even removes the obnoxious yellow coloring that over time accumulates. Use a damp Magic Eraser to buff each one, and when they dry, wipe with a paper towel.
Which headlight restorer works the best?
The Mothers NuLens Headlight Renewal Kit, another brand-name product, strives for superior outcomes and a leisurely repair process. Its inclusion on our list of the top headlight cleaners is due to this.
A drill attachment, rough repair discs, a foam ball polish applicator, and polish are all included in the set. You should check the directions carefully as you go with the cleaning process because they specify a combination of dry and wet sanding. Painter’s tape, gloves, and a microfiber towel to dry your freshly polished headlights are the only supplies you’ll need to bring.
You might only need to polish your headlamps if they only have minor oxidation. However, the Mothers NuLens kit still does the trick for minor blemishes, dirt accumulation, or pitting.
Key Features
- use a power drill for simple application
- There are plenty of materials for potential future applications.
- comes includes a foam polishing ball, three repair discs, a disc-holder drill attachment, and polishing fluid.
- able to handle a lot of oxidation
Our Experience
Mothers NuLens did a wonderful job of restoring our sun-damaged headlight lenses, much like the Sylvania restorative kit did. We could have definitely taken on a few more headlights after our initial batch, demonstrating how well this brand does in terms of instruction clarity and material volume.
The Mothers NuLens Headlight Renewal Kit was unable to win the title of our best headlight restoration kit due to two obstacles: the drill attachment system is not suitable for everyone, and the maker makes no mention of the product’s UV protection. While the results are positive, they do not guarantee bright headlights six months or a year from now.
What Customers Are Saying
Based on more than 8,000 customer reviews on Amazon, this heavy-duty headlight restoration kit is rated 4.2 out of 5 stars. The majority of consumers claim that when they adhere to the guidelines, results are amazing. However, some customers claim Mothers NuLens falls short of the standard of quality provided by rival products.
Does toothpaste truly clean headlights that are foggy?
Toothpaste’s formula contains trace amounts of abrasives that can remove oxidation, road debris, and stuck-on filth, making it an efficient method for headlight restoration.
In order to maintain the paint work of the car, you should tape the corners of the headlights before washing them. If you’d rather use less tape, you may also tape up plastic sheets over them because the sticky adhesive might harm your car’s paint if it’s left on for too long.
After that, fill a bucket with water, generously apply toothpaste to our Premium Wash Mitt, and then add water to thin out the consistency. Wash the dirt off your mitt and reapply toothpaste as necessary as you scrub at your headlight. Repeat this procedure until your headlights are clean and free of grit. Then, gently remove your protective tape after completely washing out any toothpaste traces and drying the cleaned area with The Absorber.
How can I clean my headlights with common home items?
Headlights are crucial for illuminating the front of your car so you can see the road clearly. Of course, they are also necessary so that other drivers can see you while you drive at night or in other low-light conditions. Even though headlights are something that is readily ignored, oxidation over time causes them to turn yellow or fog up. Although there are many products available for purchase to clean headlights, did you know that you can also use a variety of everyday items to do so? See our guide on how to use common home objects to clean your Toyota headlights. For more Toyota advice, be sure to visit our blog.
How to Clean Headlights with Baking Soda
5 tablespoons of baking soda should be added to a bowl along with enough warm water to make a paste. Apply the baking soda paste to your headlights with a corner of your sponge after you’ve given your headlights a basic cleaning. Utilizing a clean cloth and small circular strokes, polish your headlights. You can carry out this step as many times as necessary to achieve your desired outcomes. Your headlights will sparkle like new after being washed with dish soap and warm water.
How to Clean Headlights with Vinegar
Remove the cover off your headlights, submerge it in a bath of white vinegar, and let it sit there for about an hour. Reinstall the cover after removing the filth with a rough sponge. Any caked-on dirt should be loosened by the acidity of the vinegar.
How can headlights be cleaned for the cheapest price?
You can attempt to clear the headlights if they are only slightly cloudy by using an abrasive, such as toothpaste, and vigorous scrubbing. Start by using soap and water or Windex to clean the headlights. After that, apply toothpaste to the wet headlight using a soft cloth and a fingertip’s worth of pressure. (Baking soda toothpaste works best.) Begin cleaning. Maintain a moist surface and add extra toothpaste as necessary. Apply a sealant once you’ve taken off the protective covering.
What results in the yellowing of headlights?
What Causes Cloudy Headlights? When exposed to UV light, acrylic headlights oxidize. To aid with this, headlight lenses are provided with a clear top coat; but, with time, the coating wears off, and sunshine causes the hard plastic to turn yellow.
Can headlights be cleaned with rubbing alcohol?
In comparison to the toothpaste method, the sandpaper method yields superior results but involves more time, effort, and expensive supplies. This is the approach you should take if your headlights are truly foggy, as in you’re having difficulties seeing through them foggy.
Too good for personal care items? The headlight dust may be removed more completely with the sandpaper method, which just involves a little bit more work (primarily locating sandpaper). Your headlights should be properly cleaned with soap and water, dried completely, and taped afterward.
Sandpaper (800 grit to start) should be dampened somewhat before being used. Circular motions around the headlamp should be followed by a horizontal route. Do this gently; if you press too hard, the housing may be scratched.
Grab a finer sandpaper (1,600 grit or more) and repeat the procedure going the opposite way. When finished, use rubbing alcohol to clean the headlight (this helps the headlight dry). At this stage, everything should appear to be very clear, but as a final step, polish the plastic with toothpaste (as described above) or a specific headlamp polish.
Can Coke be used to wash automobile headlights?
First things first, use a clean towel or microfiber cloth to remove the dust from your headlight lens to begin the cleaning procedure. To make sure you have a clean and dry surface to work on, you can also choose to give your car’s headlights a thorough cleaning with an automotive soap and sponge.
Open a can of Coca-Cola beverage and spray it over your headlight lens once you’re finished. (Take care to prevent paint damage to your car.) Coca-Cola can be made into a spray bottle, or you may soak a sponge or towel in it and dab it on your headlights to make them look foggy.
After around 10 minutes, use a fresh cloth to clean your headlights. You can wash your headlights with car soap and warm water if the lens of your headlights still has some stubborn Coca-Cola stains on it. If your headlights still appear foggy after washing the Coca-Cola off, you might want to try repeating the procedure as often as you can to achieve the desired results.
Otherwise, this might just be a waste of good Coke! How many Coke cans, in all sincerity, are you willing to throw away every year, every month, or every weekend? The cost of headlight lenses is high. Have you compared replacement costs? You wouldn’t want to tamper with it with household remedies if you have it and are aware of the expense. What is the best substitute then? WD-40 for headlight lens restoration? Actually, no! Purchase a headlight restoration kit is the solution. Kits for restoring headlights are less expensive than buying new ones. A decent restoration kit costs as little as $15.