Press here to reset the system. (It is advised to use a pin or clip to hit the AVN system’s “RESET” button.)
In This Article...
Why won’t my Kia Soul’s media button function?
1) If your Bluetooth device isn’t paired and connected, the button won’t function. 2) Reset the head unit if your phone is connected and paired. The volume button is close by a little button. Use the tip of a paper clip or pen to press it.
Why won’t my Kia’s Bluetooth connect?
- Try unplugging every gadget from the Kia and removing it from the infotainment system permanently. One electrical device should be connected at a time. To prevent connectivity problems, Bluetooth should be turned off on any additional devices that are not in use. Turn off Bluetooth on both your Kia and your smartphone. Restart both your electronic gadget and the vehicle after that. Restart both, then turn on Bluetooth on each and try connecting once more.
- To improve the Bluetooth connection between your smartphone and the Kia’s infotainment system, clear the area around it of all clutter, including coins and pens.
- A full charge should be present on your smartphone. It will emit a weak Bluetooth signal when the battery is low, which might lead to issues like dropped calls.
Why doesn’t the radio display on my car work?
You need to figure out the root of the problem before attempting to fix the car audio display. This implies that you must determine what is genuinely causing the issue.
Your car radio display acting strangely could be caused by a number of factors. You must therefore be aware of the many causes. Let’s review them now.
Reason 1: Unadjusted Brightness
The dimmer settings should be checked first. While you could be searching in circles for the cause of the issue, it might only be this small. The majority of automobile display devices provide settings for adjusting brightness.
Additionally, the wrong brightness settings could prevent your display from showing anything at all. You might even have the brightness set to the lowest setting and still not be able to see what is displayed.
This might also occur if your children decide to play a practical joke on you by dimming the display brightness while you’re away from them in the vehicle. So if you’re having problems with the display, make sure to check the brightness settings.
Reason 2: Malfunctioning Connector Wires
The design of the particular cables is another issue with the automobile display devices. Your car’s screen may stutter a little bit from time to time, or it may go entirely black.
Wire management issues may be the cause of the blank car screen issue. Your display unit isn’t actually showing anything, so it would help if you got your hands filthy to inspect this problem, but it would be useful.
The automobile radio display is either wired to the main unit or soldered to it. The potential of loose wires exists whenever cables are utilized. Even broken wires can result from strain.
A wire may not supply the display with enough power if it is improperly installed. This could eventually cause the display to behave strangely. If your stereo display exhibits similar symptoms, you should have the cables checked. You can read this post to understand about the automobile audio speaker wire guidance.
Reason 3: Problem with Fuses
The display unit in your automobile can have problems as a result of a bad fuse. If you’re unlucky, a blown fuse will prevent your car stereo from turning on when the ignition is on. A somewhat old but still efficient method of preventing short circuits is the use of fuses.
Additionally, your automobile may have had a fuse installed that was intended to prevent a sudden short circuit from damaging your radio. Your automobile radio display may not function due to a faulty or damaged fuse.
The display unit and the power wire are directly across from this specific fuse. If you replaced the standard stereo with a more modern one, there may be a problem where the aftermarket stereo won’t switch on because of a blown fuse.
So it seems sense that if the fuse blows, the power would cut out. You might be experiencing issues as a result of the fuse blowing while you weren’t there.
Reason 4: Damaged LCD Panel
Although the stock panels are reputed to be extremely durable, a faulty one could always exist. If your display was flawed when it was put together in the factory, you should probably check that out or get it changed.
Even if the display initially didn’t indicate any problems, a damaged LCD screen would soon reveal its flaws. So, if you assumed that everything about your LCD was fine, you might have been mistaken.
Some individuals have also had issues where their car radio functions but has no display. The LCD panel may be the cause of this.
Reason 5: Defective Head Unit
The centerpiece of your car’s infotainment system is the head unit. And if that’s broken, you probably won’t be able to see anything on display.
Every electrical component has a legitimate chance of malfunctioning, and your car’s main unit is also vulnerable to damage. They might not show it, but they might benefit from some upkeep.
There could be an accumulation of dust within, which could make the circuits malfunction.
Activating UVO eServices in Your Kia Vehicle
By following these easy steps, customers can activate UVO eServices in their Kia vehicles:
- On the steering wheel, press the “Mode” or “Information” button.
- Select “Setting up with a touch screen
- Select “On the touch-screen, UVO eServices
- Select “Touch-screen activation of UVO eServices
- Select “On the touch-screen, activate
- Now available is UVO eServices.
Connecting to Bluetooth in Your Kia Vehicle
By following these easy steps, customers can pair their smartphone with their Kia vehicle’s Bluetooth wireless technology:
- In the settings of your smartphone, enable Bluetooth.
- A touch-screen phone should be selected.
- On the touch screen, select “Bluetooth Connection.”
- Pick “Add New” from the touch-screen menu.
- In the Bluetooth settings on your smartphone, choose your Kia vehicle.
- If necessary, enter the password shown on the touch-screen into your smartphone.
- When prompted, choose that choice if you want to make this phone your primary phone.
- Your smartphone and the Bluetooth in your Kia vehicle are now connected.
Resetting the radio on a 2012 Kia Soul is simple.
Find the radio’s little reset button hole on the faceplate. Although it occasionally appears in the upper-right corner of the display, it is typically found in the lower-right corner. 2. Press and hold the “Reset button for one second using a paper clip or pen tip.
How do I get my iPhone to work with my Kia Soul?
Go to the Settings app on your Apple device and select the Bluetooth setting. Go to Settings, Connect, then Bluetooth on the infotainment screen of the vehicle. Your phone will appear on the screen as an available device when you select Connect New Device.
How can I restart my car’s Bluetooth?
The best approach to accomplish this is to turn off Bluetooth on both your smartphone and your car. Remove your smartphone from the infotainment system in your car, along with any history of connected devices. After that, turn off the car and restart your phone while still in it.
Why won’t Apple CarPlay connect to my device?
Restart both your automobile and your iPhone. Make sure Siri is turned on. Check to see if CarPlay isn’t restricted if it can’t detect your iPhone. Make sure CarPlay is turned on by going to Settings > Screen Time > Content & Privacy Restrictions, tapping Allowed Apps.
In my Kia, how do I activate Bluetooth?
The gadget must first be added to your Kia’s list of Bluetooth devices in order to pair with it. Simply turn on Bluetooth and connect to the device of your choosing after that.
You must first pair a device with your Kia by adding it to the system’s list of Bluetooth devices in order to establish a connection over Bluetooth. Five devices in total may be registered. This is how.
1) Press the [PHONE] button on the control panel, then choose Phone settings > Add new device. You can also use the Call/Answer button on your steering wheel as an alternative.
2) On the device you wish to connect to, turn on Bluetooth. Find the system for your car and then choose it.
3) To finalize the connection, enter or confirm the password.
* Enter the password 0000, which should show up on your system screen, if the passkey input pop-up shows on your device.
* Verify that the 6-digit password that shows on your device matches the one that is displayed on your system screen, and then confirm connection from the device, if one displays.
Bluetooth is allegedly universally compatible, although there are some situations in which this may not be the case. For instance, Bluetooth Smart devices can only be associated with other Bluetooth Smart devices.
It is simple to couple a device with your Kia, however you can only connect one item at once.
1) From the control panel, select Phone settings > Paired devices by pressing the [PHONE] button. You can also quickly start by pressing the Call/Answer button on the steering wheel if there is no connected device.
2) Choose the device of your choosing by turning the [TUNE] knob, then press the knob to connect.
*If another device is already connected, click on it to unplug it first.
How do I update the infotainment on my Kia?
1. The engine should be running while updating the navigation; be careful, as this utilizes the battery of the car. Just make sure the battery is fully charged before beginning an update.
2. If the vehicle engine is started during an update, power to the system may be briefly cut off, which might affect data transfer and file integrity. If the portable device containing the update is removed during the update, the navigation system may not function properly.
3. Please be aware of your local traffic laws before updating your navigation because doing so could violate the applicable traffic rule.
Referring to the navigation update guide, continue with the car update.
Please proceed with the update process in your car using the USB-connected portable device.
On the General Settings screen, select “SW Info/Upgrade,” and then “Update” to begin the update.
Please proceed with the update process in your car with the portable device (SD Card).
To begin the update, click “Update” on the General screen, then “SW Info/Update.”
Please proceed with the update procedure in your car with the USB portable device.
In the General Settings page, select “SW Info/Upgrade,” and then “Update” to start the update.
On the General Settings screen, select “SW Info” and then “Update” to continue with the update.
In my automobile, how do I set up Bluetooth?
from your phone, pair
- Verify that your car is paired and ready for discovery.
- Open the Settings app on your phone.
- Then select Connected devices. Tap “Bluetooth” if you see it.
- To pair a new device, tap. Name of your vehicle.