What Oil Goes In A Kia Sportage

Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart, by Mobil 1 (Part No. 14977)

What kind of oil is used in the Kia Sportage?

For Sportages with 2.0-liter engines, Frank Boucher Kia advises using viscosities of 0W-30, 5W-30, or 5W-40 at high conditions. We suggest the brands listed below for each of these categories of oil.

Pennzoil Platinum Euro LX SAE Full Synthetic 0W-30 Motor Oil

On our list, Pennzoil Platinum is first. It is fantastic for vehicles that operate in extremely hot climates. Instead of crude oil, natural gas is used to make it. Additionally to safeguarding your horsepower, it also results in cleaner pistons and higher gas mileage.

Notice to Our Loyal Service Customers Regarding Your Kia Warranty And Kia’s New Synthetic Oil Requirement

All Kia vehicles built after April 2021 must now use 100% synthetic oil in order to remain protected by factory warranty. Any vehicle that is still covered by a factory warranty after June 2022 will need to use full-synthetic oil to stay protected. Your guarantee may be void if conventional or semi-synthetic oil is used.

Can I use 5W-30 for 5W20?

It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.

Because your engine was developed with 5w20 oil in mind when it was constructed, all of the parts that come into contact with it must be a specified viscosity after the engine hits operational temperature, or 212.

5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.

If you substitute 5w30 oil for 5w20 when doing so is not advised or authorized by the owners handbook, it could violate your car’s powertrain warranty, impair engine performance, and ultimately harm your engine.

Using the proper oil keeps your engine operating at its best.

use Jerry to be sure you maintain it covered with the appropriate insurance policy. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.

Can I use 5W-40 for 5W-30?

Using 5w30 oil:

For 5w40 oil:

This essentially indicates that each oil is equally viscous at lower temperatures and will remain so at a temperature of 30C, but that 5w40 oil operates better at higher temperatures than 5w30 oil, being effective up to ambient temperatures of 50C as opposed to 30C.

In comparison to, say, 10w40 oils, 5w40 and 5w30 motor oils have winter viscosity grades of five, making them effective down to temperatures of -30C and more viscous at extremely low temperatures.

As a result, 5w40 oils are probably utilized in higher-performance engines that operate at higher temperatures and loads than usual, such as those used in vehicles driven in metropolitan environments, which frequently sit in traffic, or in vehicles traveling at very high speeds, for example.

5w30 oils are a fantastic option if your vehicle is not made to be driven at a high rate of speed or if you drive more cautiously and sustainably. These typically perform better for certain engine parts like oil pumps, can clean the engine better, and have longer lives because they operate at lower temperatures.

Low-Shear-Rate Viscosity for 5w30 and 5w40

At 100g, the viscosity of 40 ranges from 12.5 to 16.3 mm2/s. At 100g, the operating viscosity of 30 ranges from 9.3 to 12.5 mm2/s. Both oils are 5 grade while they are cold, however at operating temperatures, 5w30 becomes 30 grade and 5w40 becomes 40 grade. With greater temperatures in the summer, 5w40 has a higher viscosity than 5w30, which aids in the motor’s continual operation.

High-Shear Rate Viscosity

This value is a minimum of 3.5 at 150g for a working viscosity of 40. The value of this parameter at 150g must be at least 2.9 for a working viscosity of 30. This indicator largely reveals how much the oil can withstand under harsh loads.

Application

Although it may be utilized by various types of cars and in a variety of temperatures, 5w30 is best in colder climates. Higher mileage engines frequently employ 5w40, which operates better in warmer climates.