Contact a locksmith, but be ready to re-bend your door. To unlock your Kia Optima, locksmiths will pull the door away from the body using a wedge and a pump-up tool.
A slim jim would work if you had a general manager, but you would also have to deal with the GM’s easy steal features.
Simply take the top of the door away from the body if you wish to DIY. As I said before, locksmiths will first use a plastic wedge to pull the door out a little at the top, and then they’ll use a pump-up wedge to open it further without harming the paint. If I were you, I’d use a wood wedge to prop open the top of the door, providing you have 24s handy, then sneak inside and deactivate the power door lock using a coat hanger. If you decide to do it, open the door on the side you wedged before opening the other to prevent any damage to the latch. Given that easy access is restricted by the Kia Optima door’s top sill, you might even have better luck pressing the hatch release button.
I am a locksmith with AAA. There are three approaches you can take. As everyone has mentioned, the long rod (extension tool) can be used with the door wedge. It is much simpler to pull the handle back than the lock mechanism itself. You may also use this to open the handle if you have a tool that is designed to go inside the Kia Optima and come up through the inside of the window. The handle only needs to be opened about 1/4 of the way before it unlocks. IL man, I wish I was there. Only an L-shaped tool (L tool), which is nearly impossible to find unless you’re lucky, will function inside the actual door. If you want to try the L, the internal door mechanism is about 6 inches below the handle, near to the back of the door. Once you’ve located the Bellcrank, you must fumble with it and then turn it clockwise. The hardest route is the last one.
Ask if lockout assistance is available by calling the local police non-emergency line.
What does the lockout kit for the Kia Optima contain? Don’t even attempt it if it’s the slim-jim. If you don’t perform it correctly, you risk breaking the lock and being completely helpless.
If you have a wedge of some kind and the long metal bar (not a flat piece, that’s the slim-jim), you can drag the top of the door back and gain approximately an inch (enough room to get the bar through). Once the bar is in place, you can either attempt to push the manual lock or, if you have power locks, press the lock button. Another option is to try pulling the handle.
I’ve managed to lock my keys in the car six times this year, so I’m good at it. Going back to the dealership where you purchased the Kia Optima and asking them if they can produce you a key without the cip is a good idea. I keep the free one in my wallet because it is thin.
In This Article...
If you lock your keys inside your car, how do you get the door open?
The usage of fancy key fobs, touchpads, and remote-unlock sensors in some more recent vehicles virtually ensures that you won’t get locked out. But what about the millions of poor souls who still manually lock and unlock their vehicles? Will they always be bothered by automobile windows that are shattered and prybars?
It is entirely possible to get your keys out of a locked car with a little patience, experience, and even more patience, and you probably won’t need to go to an auto body shop nearby to have your window fixed afterward. Here are some pointers for entering your locked automobile safely. (Bad people shouldn’t read any farther.)
Without a key, how can you open a door from the outside?
Everyone has encountered the inconvenience of being unable to enter their own house, workplace, or vehicle due to forgetting, misplacing, or losing their keys. Therefore, you turn to a locksmith when you need to force open a locked door. Although they are unquestionably adept at what they do and can be quite helpful, they aren’t always accessible. Fortunately, just because you’ve locked yourself out of your own house or business doesn’t mean you have to go through a lot of hassle. There is a simpler method to enter again, and the following are some simple strategies to assist you open your door without a key:
Use a bobby pin
One of the most popular methods for opening doors is the bobby pin lock pick. It is referred to as a “rake pick” and can be used to unlock any door with tumbler locking mechanisms. One of the most fundamental and user-friendly is this.
This practical hack’s trick is as easy as using a bobby pin. But doing it is not that simple. Finding the ideal candidate, who will facilitate the process, is the challenging part. You must locate a bobby pin that is tiny and extremely flexible for this life hack to work (the more flexible, the better).
Use a screwdriver
It’s simple to open a door without a key by using a screwdriver. Find the one that fits your lock the best, then slide it into the little space between the door and frame just above the handle or knob. Simply place the tip of the screwdriver into the space between the bottom of the door and the floor while holding it in your right hand. Once you hear a click, turn counterclockwise. Repeat the clockwise turn until you hear a second click. Open the door at last.
Use a knife
If you know how, you can use a knife to open your door. You must first unlock the lock. Use your knife to wedge it between the top of the keyhole and the top of the actual lock to accomplish this. To unlock the blade, you will then need to gently press down on it.
Lock picking
Lock picking, also known as lock opening, is the technique of opening a lock without the use of the original key by dissecting and manipulating the lock’s parts. There are many different tools available to do lock picking; their designs range greatly from basic probes to highly specialized tools created specifically for one particular make and type of lock.
Use a credit card
Sometimes you have to use an unusual approach to finish the work. A brand-new method for picking locks is becoming popular. It only needs a credit card and one of those tiny tool kits you can get at Walmart; it doesn’t call for any specialized knowledge or equipment. The actual method is straightforward: just push the credit card against the strike plate’s bottom by sliding it into the door jamb. By doing this, you’ll be able to push the doorknob or open the door normally by forcing the bolt back.
Use a Bump key
The majority of locks can be unlocked with a bump key, which is a relatively basic tool. An allen wrench or toothpick is used to bump one or more pins once the tool has been put into a keyway. This makes it possible to open doors without a key. In an emergency, you can employ this technique.
Remove the hinges
By removing the hinges, you may unlock your door without a key. Hinges are used to keep things where they belong by preventing doors from being opened. When the hinges are taken off, though, nothing can stop you from opening up and making spaces for fresh ideas to enter. All you need for that is a hammer, a puller, and a hinge remover. These items are conveniently accessible in the market or even at home.
Unable to unlock your door? Call Locksmith Monkey in Portland
You know how difficult it may be to try to get back inside if you’ve ever locked yourself out of your car or house. A backup key should always be kept outside and hidden in case of an emergency, but what if you lose that as well? It can appear that there is no remedy if the lock is broken or blocked, making it impossible for you to even open the door. However, the above-mentioned solutions are some intelligent ways to return to your own house without damaging anything.
How is a Kia unlocked?
Activate Your Kia
- Click the “To swiftly unlock the driver’s door, press the unlock button once.
- Click the “To unlock all of the doors for passengers and to load freight, press the unlock button twice within two seconds.
How do I get inside my car?
You might need to break into your car to get your keys out if you’ve locked them inside. A coat hanger or thin metal implement can be used to unlock a locked car door. It is extremely simple to lock yourself out of your automobile, and you will run into serious trouble if your key is locked inside the vehicle or is lost without a backup key nearby. Sometimes people are compelled to take drastic means to retrieve their keys that have been locked inside of their automobile; others even break a window to gain entry. When shattered, tempered glass is specially treated to shatter into thousands of pieces. In an accident, there won’t be large pieces of flying glass that way. Knowing the right technique for breaking into a car will save you the money and effort of breaking a window open and cleaning up the broken glass. Several approaches are available for you to test out because they don’t require any specialized tools or prior locksmithing experience. The option to call a professional Houston locksmith expert is typically available, but there might not be one nearby or you can have a long wait. Auto locksmiths are crucial.
Method 1: Unlock A Door From The Inside Of A Car With Manual Locks
Open the top of the automobile door just wide enough with a tool as a wedge (a strong airbag is used by professionals) so that a metal rod can be wrapped around the locking pan and pulled up to release the pin and unlock the door. It is crucial that the method utilized takes into account the unique type of lock on the car.
Step OneUse A Tool Or Wedge
To hold the door’s space, use your tool or wedge. To create a space between the car’s body and the window or door frame at the top of the door, use something thin.
Step TwoSlide Tool In The Door Gap
Enter the door gap with your tool. After that, insert your tool into the area between the car’s body and the top of the door’s side opposite the hinge (that corner is one the will put out the most). Pull open a gap with your finger to make room for the tool to pass through.
Step ThreeInsert Tool Until Visible
Insert your tool further till it is visible. As soon as you can see it through the automobile window, slowly lower and insert the tool into space.
Step FiveUse Hook To Open Lock
To unlock the lock, use the hook. To create a space large enough to fit the tool inside the car, use your wedge. Using the tool, grasp the door’s locking pin and pull up until the door unlocks.
Method 2: From The Inside, Unlock A Car Door That Has Automatic Locks
The same steps that are utilized with manual locks are employed to separate the top portion of the car door from its body. Simply make a space with a long, narrow object like a wedge. Next, use a different tool to push the “unlock button.” How easy or difficult it is to pull the door away from the car’s body and where the switch or button regulating the locks is positioned both affect how challenging it is to open an automated lock from the outside.
Step OneHow Are The Car Locks Activated?
Find out how to operate the car’s locks. The activation of automatic locks can be done in a variety of ways. Verify where the car’s unlock button is located to see if it is on the console or the driver’s side.
Step Two: Press On Car Button
To press the button, make a loop or hook tool. Some automated locks feature a simple button on the driver’s side armrest. Using a tool like a straight metal rod, one can reach this button and press it to unlock the door. You might require a tool to seek for or a hook at the end if the button is difficult to reach or if it is a switch. Trial and error is the greatest way to learn what works.
With a paperclip, how can you open a door without a key?
The exterior knob of the majority of interior locksets has a pinhole for emergencies. One paper clip that has been straightened out can be used in place of the pinhole door knob key in order to open one of these locks. To unlock the door, push on the paper clip after inserting it into the pinhole.