You are prepared to start your journey if you have the car’s key fob in your pocket or handbag. Observe these easy steps to start the engine:
- Verify that the gears are in neutral (N) or park (P) (N). Put your foot on the brakes. To get the engine to start, press the Engine Start/Stop button.
It’s equally simple to turn the engine. Press the Engine Start/Stop button once more after putting the car in park or neutral.
In This Article...
THE TECHNOLOGY BEHIND IT
This function only operates while your key fob is active or a short distance away from you thanks to a special signal from a key fob. You can only start your automobile with a push button start using the signal from your key fob.
WHAT YOU NEED TO DO
Applying the brake after getting into the automobile is followed by pressing and holding the engine start/stop button until the engine starts. Make sure your car is in park before pressing the engine start/stop button and holding it down until the engine completely turns off. Consider using the parking brake as well.
TIPS FOR USING
- Before exiting your car, make sure the engine is off. This lessens the possibility of carbon monoxide poisoning if you park your automobile in a space with limited ventilation.
- Apply the parking brake after you’ve shut off your car, like you would with any other vehicle, to lessen the possibility that it could roll away.
How is a Kia Soul turned off?
It is NOT SUGGESTED to use aftermarket cables as they can affect performance. Press the ENGINE START/STOP button once more to switch the engine OFF. The Smart Key fob needs to be in the car in order to operate the ENGINE START/STOP button.
How can a car be turned off from the outside?
If you apply the brakes after getting into the car, press and hold the engine start/stop button until your engine starts. Make sure your vehicle is in park before pressing the engine start/stop button to turn it off.
How can I deactivate my Kia ISG?
The ISG button is situated on the driver’s panel to the left of the steering wheel in the Soul and Seltos. To disable the “stop and go feature,” press the ISG button.
Why can’t I shut off my car?
You anticipate the automobile to stop when you switch off the key! When it doesn’t, it can be very upsetting. Your ignition and fuel system are not shutting down if the engine continues to run exactly as it did before you turned it off, or as if you hadn’t turned it off at all. Then there is an electrical issue with your car that needs to be fixed. A power relay or your ignition switch element has to be replaced. However, “dieseling” is what you are experiencing if the engine doesn’t stop and instead looks to go into leaping convulsions while making knocking and pinging noises.
When something in the engine combustion chamber is hot enough to ignite any leftover fuel that enters the engine, this is known as dieseling. It is known as “siegelling” because diesel engines ignite the gasoline in the same way without the use of spark plugs that are powered by electricity. Modern fuel-injected cars rarely have this issue, although car owners in the days of carburetors used to experience it frequently.
if there is a sieling issue with your car. You can take a few actions that might enable you to ascertain the situation’s details. You might be able to solve the issue by making a few little changes.
Why does my car remain running when I switch it off?
I’m here. Dieseling is the term used to describe the sound you are hearing. When this occurs, make sure the ignition switch is aligned and that it is totally off. If the switch is off, unplug the power to the ignition coil pack while the engine is still trying to start, and it should stop. When the ignition switch is turned off, power continues to feed from the ignition switch to the ignition coil in the event that the engine is not operating. This indicates that the ignition switch needs to be changed. There are too many carbon deposits in the combustion chamber if the engine continues to run without spark. I advise adding sea foam to the vacuum system, engine oil, and fuel tank one section at a time. This will enable the carbon deposits to be removed and stop the engine from dieling. Carbon deposits heat up quickly and persistently. When fuel is introduced into the chamber, the carbon may ignite the fuel sooner or even after the injector has ceased to operate. When the carbon is hot, oil with fuel vapors in it will continue to burn, keeping the engine running. If your engine continues to run after you have turned off the ignition, get professional assistance from a company like Your Mechanic.