A conventional key is used in the Kia Niro. Simply insert the key into the ignition to start the car. Select “D” for drive or “R” for reverse while keeping your foot firmly on the brake pedal. The car will start to move if you gradually let up on the brake pedal.
In This Article...
The Kia Niro has auto start, right?
The ONLY remote start system for the 20172021 Kia Niro Hybrid that is 100% plug and play. Most consumers can complete the installation process in under an hour. To start your Kia Niro after installation, simply push the lock button on your OEM remote three times. If the factory remote’s range is insufficient, you can also purchase one of our choices with a longer range when you check out. This kit now contains TAKEOVER, so when you open the door, the car won’t turn off and you may hop in and drive!
- Complete Kit includes ALL required parts.
- includes instructions for installation.
- Easy to install, requires no cutting or splicing
- Easy, straightforward, PLUG & PLAY installation
- These kits, sold in the thousands, are excellent!
- 2017 2018 2019 2020 2021 Niro Hybrid Kia
- Your VIN #’s tenth letter must be an H, J, K, L, or M.
- Push-start ignition is required.
- Unable to work with key start
- not appropriate for electric models
- Not appropriate for plug-in models
- Power locks and keyless entry are required for the vehicle.
- only an automatic transmission.
Plug and play installation was completed on the driver’s side at the headlight switch and one t-harness was installed on the passenger side behind or below the glovebox. Plug & Play installation in its entirety ABSOLUTELY NO cables must be cut, spliced, etc.
Your present OEM remote’s lock button must be pressed three times in order to start the car.
Your present OEM remote’s lock button must be pressed three times in order to STOP the vehicle.
If you don’t get out and get in, the vehicle will run for 15 minutes before shutting down.
Simply get inside and depress the brake to take control of the vehicle after remote starting. After that, you can start driving without having to shut down or restart the car.
- Simply press LOCK three times on your factory remote to activate the remote starting. 3x Lock From OEM Fob Only = No Additional Remotes to Carry.
- 1-Way 1500ft = Includes two 1-button remote controls with a range of up to 1500 feet, plus a third lock from the OEM fob that also functions.
- 2 Way 3000 Foot = Includes 1 1-Button 1-Button and a 2-Way Remote The OEM fob’s 3x lock and a 1-way remote with a range of up to 3000 feet will also function.
- Start your automobile from anywhere in the globe with an app on your phone. Service Plan is necessary upon purchase or installation. Free for the first year, then $39.95 per year. (3x Lock will also function)
- Full House = You get everything! Use the 2-way 3000ft remote control, your smartphone, or your OEM key to start your vehicle from anywhere in the globe. Press lock three times. After purchase or installation, a service plan is required for the smart phone module. Free for the first year, then $39.95 per year.
How is a Kia Niro plug-in hybrid jump-started?
If you’re fortunate (and take good care of your automobile), it’s possible that you won’t need to jumpstart a car for many years. You’ll be glad you know how to do it if you ever need to jump start your own vehicle.
You can be stuck for hours if you don’t know how. Don’t allow this vital ability slip your mind.
Attach
Connect the red (+) clamp to the dead battery’s positive terminal. Next, connect the red (+) clamp to the functional battery’s positive terminal. Attach the black (-) clamp to the active battery’s negative terminal. Last but not least, fasten the leftover black (-) to a deceased car’s unpainted metal surface.
How do you use a key to start a Kia?
Beginning the Car
Simply touch the key fob to the remote start button if you see your key fob’s battery is running low. Simply press the start button with the key to get going.
I don’t have a key, how can I start my Kia?
Great midsize SUVs include the Kia Sorento. A ton of useful technological elements are also included in it. But you’re in the right place if you’re asking how to start this without a key fob. To find the answers for you, we conducted the research.
Step on the brake pedal and push the Start/Stop button on the engine until the Kia Sorento starts. This may be done without a keyfob.
The Kia Sorento provides you with the ease of starting the engine without having to panic and scramble for your keys, thanks to its user-friendly technology. If you want to know more about starting the Kia Sorento without the key fob, keep reading.
Parallel Hybrid System
The advanced Full Parallel Hybrid System in the Kia Niro Plug-In Hybrid is largely responsible for the vehicle’s ground-breaking economy and dynamic performance. The Niro Plug-In Hybrid offers a 26-mile all-electric range rating** along with up to 46 combined MPG** by combining a hybrid-optimized Atkinson cycle engine with a highly efficient electric motor. The car uses regenerative braking to store kinetic energy for battery recharging. The Niro Plug-In Hybrid offers a sporty ride not found in its rivals thanks to a highly responsive, smooth-shifting dual-clutch automatic gearbox (DCT), in contrast to other hybrids that typically provide a continuous variable transmission (CVT). Even better, it qualifies for federal and tax rebates***, as well as a High-Occupancy Vehicle (HOV) decal in several jurisdictions.
Hybrid Technology and Charging Capabilities
Directly in front of the driver is a Supervision Instrument Cluster with a 4.2-inch TFT LCD screen that makes it simple to see critical vehicle data like speed, fuel, and distance in a flash. It is situated between recessed gauges. Thanks to Kia’s UVO connection system, you may communicate with your Niro Plug-In Hybrid directly from your smartphone. Utilize features like Off-Peak Charge Scheduling to schedule charging during off-peak electricity hours or Find Charging Stations to locate charging stations while you’re on the go in order to maximize your savings. Before you get to your car, you’ll be able to lock and unlock doors, turn on your engine, and regulate the temperature inside with heated accessories or air conditioning.
The Niro Plug-In Hybrid offers drivers a variety of charging choices. For convenient overnight charging, its high-capacity battery system recharges in less than 2.5 hours using a 240V power outlet and in less than 9 hours using a typical domestic electrical outlet. To find the closest charging station, you may even utilize the voice-command navigation system that is available and offers turn-by-turn directions.
Driver-Centric Interior
The Kia Niro Plug-In Hybrid has an interior that is filled with thoughtfully designed comfort and convenience features, which is the ideal companion to its attractive outward appearance. A 60/40 split folding rear seat is designed to allow you to make the most of every square inch of inside space and provide you complete freedom when setting up your cargo. You may discover your ideal seating position using the available 10-way power driver’s seat, and the Integrated Memory Seat (IMS) technology will allow you to maintain it. The Niro Plug-In Hybrid has logical standard equipment like an auto-dimming rearview mirror and dual-zone air conditioning. Bright contrast stitching that is an option for leather seats offers the interior a unique touch.
How far can a hybrid Kia Niro travel on battery?
The 11.1 kWh battery pack in the plug-in hybrid model is expected to provide about 33 miles of electric driving range on a single charge. According to Kia, the battery can be recharged in less than three hours when the vehicle is linked to a Level 2 charger.
How can I start the battery in my car?
How to Start a Car on Your Own
- Park with the cars facing one another.
- Locate the batteries by lifting the hoods on each.
- A battery’s positive and negative terminals can be located.
- Connect the red clamp to the dead battery’s positive post.
- Connect the other red clamp to the functional battery’s positive post.
Can a car with an electronic ignition be jump-started?
Push-button start and keyless ignition are common in modern automobiles. The key FOB or car battery dying can cause a whole new set of issues, despite the fact that this may be very amazing and more secure.
Here are a few methods for jump starting a car to get the engine running when it, or the key FOB, runs out of power.
Jump Box
A small automobile battery with a set of jumper cables attached makes up jump boxes. You can power the starter and the car’s electronics by connecting it to the battery of your vehicle. Simply connect the jump box to your battery, get in the car while holding your keyless FOB, push the start button, and the vehicle should start immediately.
Hill Start
You can also hill start your automobile if it has a manual transmission. Keep in mind that this technique only functions if your battery is sufficiently charged to power the electronics but not enough to start the engine (like the fuel pump and the various onboard computers). Press the Start button once to start the car while it is going downhill, then let off the brakes to let it roll slowly while the clutch is engaged. Release the clutch after shifting the vehicle into second gear. The engine will start immediately once the clutch engages with the electronics turned on in the vehicle.
FOB Trouble
What should you do if the battery in your FOB dies as well? Jump-starting a car isn’t all that different from pushing a button to start a car. The FOB is required to start the car since the electronics detect when the key is inside the vehicle using it. To some extent, automakers have considered this, since several have developed strategies that enable the vehicle to recognize the FOB in the event of a power outage.
In order to perform functions like unlocking the door and sending a signal to your automobile when it is inside, FOBs are powered by button cell batteries. But they also contain a tiny magnetic identification that can be used to distinguish when the fob is near the automobile. The push-to-start button on the majority of vehicle models can be activated by simply holding the FOB up to it while pressing the button with your foot on the brake. You’ll need to insert the FOB in this specific location in order for it to start because some manufacturers have placed a receptacle for the FOB that is situated elsewhere on the dashboard or in the glove box. Always check your vehicle’s owner’s manual to find out where your FOB belongs in either situation.
Don’t worry if you discover that the battery in your push-to-start automobile or FOB has died; we’ve got you covered.
For routine maintenance and repairs, visit one of our 17,000 NAPA AutoCare facilities or check out all the electrical system goods on NAPA Online. Consult a trained specialist at your nearby NAPA AUTO PARTS store for more details on how to jump start a car with a push-button starter.
How does the Kia smart key function?
With a smart key, you may start the car’s engine without turning the key, lock or open a door, and more.
With the smart key in your possession, you may lock and open the car doors (and tailgate). You can also start the car. Please see
Locking (1)
When all the doors are closed and any door is unlocked, locking all the doors requires pressing the button on the front driver-side door handles.
The hazard warning lights will blink once to show that all doors are locked if the engine hood and all other doors are closed.
The smart key must be within 0.71 m (2840 in) of the driver-side door handle for the button to work. If you’d like
Check the door lock button inside the car or pull the driver side door handle to see if a door has locked or not.
The doors will not lock even though you press the driver-side door handle buttons, and a 3-second chime will sound instead.
any of the following:
Unlocking (2)
All of the doors can be opened by pressing the button on the front driver-side door handles when they are all closed and locked. The danger
The smart key must be within 0.71 m (2840 in) of the front driver-side door handle for the button to work.
Other persons can access a vehicle when the smart key is detected within 0.7 to 1 meters (28 to 40 inches) of the front driver-side door handle.
The doors will automatically lock after hitting the button unless you open any doors within 30 seconds.
Tailgate open (3)
The lock will be unlocked or the lift gate will open if you press the button for more than a second.
The tailgate will automatically lock after being opened and subsequently closed.
Remote start (4) (if equipped)
By pushing the remote start button (4) from outside the car, you can start the engine and switch on the air conditioning. To begin
and remote engine shutoff:
To alert you, the hazard warning lights will blink once when you press the door lock button (1).
In less than 4 seconds after pressing the door lock button, press the remote start button (4) for more than 2 seconds to start the engine.
The hazard warning lights blink upon remote starting. The remote start button should be pressed to turn off the engine (4)
As chosen when the engine is restarted, the climate system will be continually maintained. Suppose the weather system changed
The climate system does not activate when the engine is started remotely if it was off when you stopped the vehicle.
If a person is not
When starting your car remotely with a designated smart key, the engine is shut off automatically for security.
The engine will automatically shut off after 10 minutes if you don’t ride your vehicle after remotely starting it.
If you go farther than the permitted operating distance, the remote start won’t function (about 10 m).
To abide with the pollution laws in your nation, avoid leaving the engine running for extended periods of time.
The usage of remote starting may be prohibited by law in your nation. Before using this remote starting, you should check your country’s legislation.
If you have an automatic transmission or dual clutch, you can only remotely start the engine when the shift lever is in the P (Park) position.
N (Neutral) position (for Manual Transmission (MT)/Intelligent Variable Transmission (IVT)) or Clutch Transmission (DCT)
You cannot start the engine remotely if the hood, tailgate, or hand parking brake are opened or depressed below five notches.