Oh no! I’m sorry to learn that your anti-lock brakes aren’t working properly (ABS). Your ABS is malfunctioning if the light has turned on and is staying on. By resetting your Kia Soul’s ABS dashboard warning light, you can turn off the ABS light.
The ABS light is intended to alert you of an ABS issue. The ABS dashboard warning light can be reset to turn off, but you shouldn’t do this until the underlying problem has been found and fixed by a trained mechanic.
Here’s how to turn off the ABS warning light once your mechanic has fixed whatever issue is causing it to be on:
- Locate the battery, lift the hood, and cut the positive cable.
- Holding down the brake pedal will reset and drain the electrical system of your Kia.
- Connect the positive cable once more. Now the light ought should be off.
That’s all, then! You should be good to go in your Kia! Remember that you might need to get your ABS sensor replaced if the ABS light starts to come on again.
ABS is a fantastic safety feature that can considerably lower the danger of collisions, but it cannot guarantee safety. You’ll need a strong car insurance for other damages.
After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $887 year on average.
In This Article...
Why is the Kia ABS light on?
The ABS light on your Kia typically indicates that there is an issue with one or more anti-lock brake components. It’s possible that your brake fluid is low or that the wheel sensors’ signals are broken. Atlanta Car Care’s qualified experts can identify, fix, and reset your ABS light regardless of the issue.
Why Won’t My ABS Light Go Off?
There was a problem with one or more ABS system parts. It may be an erratic issue, such as a voltage drop caused by a faulty battery or an ABS system failure. It must be reset because it won’t go away in any case.
How Do You Bleed ABS Hydraulic Units?
You must press the air out of the system in order to bleed the hydraulic unit. You simply need to squeeze the air out of the brake line to each brake caliper if you didn’t replace or loosened any hoses at the booster or ABS unit.
The proper size spanner for the bleed nipple is what you require. A second person to depress and hold the brake pedal, as well as a clear Flexi hose that fits on the caliper’s nipple.
The assistance should begin by applying the back brakes, pressing the pedal 48 times until they encounter some resistance, at which point they must maintain pressure. Remove the dust cap, then carefully open the bleed nipple with a flexible hose placed over it. Bubbles and a tiny amount of liquid ought should emerge.
While your aide continues to apply pressure on the brake, close the nipple. Repeat this process until the caliper is clear of all bubbles.
Using a big syringe, suction the air out of the flexible tube end of a caliper if you’re having trouble doing so and the braking fluid isn’t dripping out. The brake line and caliper will be cleared of air after this procedure.
You will probably require a scan tool to cycle the pump if air got trapped in the ABS hydraulic unit; for details, click this page.
Can You Drive Without ABS?
When you apply too much braking pressure, the wheels will lock up since the ABS isn’t functioning. You might have to pump the brakes in an emergency to counteract the effects of the ABS and lessen wheel lock.
Why does my Kia Soul’s traction control light come on?
ABS isn’t working: ABS (anti-lock braking system) and traction control frequently share a control module and an internal self-diagnostics system. As a result, the traction control light may occasionally come on if there is a problem with the ABS. Both the Traction Control and ABS lights will be on if this is the situation.
Broken wheel speed sensors: Wheel speed sensors measure how fast each wheel is moving and are often found in the wheel bearing assembly. The traction control module decides whether or not to shift power based on the information the sensors pass along. Wheel speed sensors may get clogged or damaged and cease to function, making it impossible for the traction control module to determine when to turn on the system.
Faulty traction control module: The traction control module, which is once again frequently shared with the ABS, may malfunction or completely fail, rendering the system inoperable.
What triggers the ABS light to turn on and remain on?
The presence of an ABS indication light on your dashboard indicates that there may be a problem with your system and that you should have it checked properly. This indicator normally illuminates for one of four reasons: either the ABS module is broken, the fluid reservoir is low on fluid, the wheel speed sensors are damaged, or the system is off.
Ineffective ABS Module In fact, the traction control system in your car and the ABS have certain crucial parts in common. A device called traction control keeps all four wheels on the ground moving easily. It will cut off power from your engine until it regains steady traction if it notices that one wheel is beginning to spin erratically. This is intended to stop you from unintentionally exerting too much power, which could cause you to slip out of control. However, because your traction control and ABS share a control module and self-diagnostic system, they occasionally clash. The ABS light may illuminate in addition to the traction control light occasionally, however there are other situations when the ABS system is at fault. To pinpoint the precise problem, your car needs to be professionally diagnosed.
The fluid reservoir has low levels. Your brakes are hydraulic, which means they work by closing your brake pads and stopping your car by applying pressure from a cylinder against a fluid. This implies that the fluid level in your brake system must be steady and continuous. The volume of fluid will decrease and your brakes won’t function properly if there is a slow leak or if the fluid is allowed to evaporate out. Usually, sensors on your computer can find this, and if it does, it will turn on the ABS light.
Wheel speed sensors that are broken Wheel speed sensors are a piece of hardware that provide information to your computer about the individual speeds of the wheels. If the computer notices a deviation from these speeds, your traction control system will alter or switch power to another wheel to make up for it. However, a speed sensor can’t convey this information accurately if it becomes dusty or stops operating. It typically disables your ABS and/or traction control systems until you restart your car or the issue is fixed rather than making a ton of adjustments.
Your System Has Been Shut Down You might be surprised to learn that you can switch your traction control or ABS on and off. The indication light on your dash will often illuminate when the system is turned off to let you know that this crucial safety feature is malfunctioning. There is a good probability your system may have unintentionally turned off if only your traction control or ABS indicator is illuminated. Whether you’re unsure of where the switch is, check to see if you might have accidently bumped it. If so, refer to your owner’s manual.
When the ABS light is on, can I drive?
As regular braking is unaffected by the ABS light, you can continue to operate the vehicle while it is illuminated. However, since your ABS system aids in stopping control and driving without it can be risky, we wouldn’t advise you to do this. You want to know how your car will function if something goes wrong. Without a fully functioning ABS system, your car could not respond to hard braking as it should.
Is it a cause for concern if my ABS light is on?
The standard brakes on your automobile should still function properly, however the antilock system that prevents wheels from locking up while braking will not. Additionally, because traction control and stability control rely on the same wheel-speed sensors as the antilock system, those features will also be disabled if your car has them.
All vehicles made in 2012 and later are obliged to feature traction control, ABS, and stability control. All or some of those features can be found in many vintage vehicles.
Every time you start your automobile, the ABS light (often yellow, amber, or orange) should briefly illuminate as a system check. If the light continues to illuminate, the system has been shut down because something isn’t operating properly.
With ABS, sensors that are put on each wheel track how quickly the wheels are spinning. When braking, if one wheel is rotating more slowly than the others, it means it is locking up, which could lead to skidding and a loss of steering control. In order to prevent further wheel locking, ABS is designed to quickly “pump the brakes at the locking wheel, allowing it to spin so that the driver retains braking and steering control.”
What causes this is as follows:
- a system fuse that has blown
- a road grime- or damage-covered wheel-speed sensor
- between the sensors and the ABS controller, a broken wire
- A malfunctioning ABS controller
An ABS sensor warning light can also be activated when a pump and valve that apply the proper amount of braking fluid pressure to each wheel to prevent locking do so.
If the regular brakes’ red warning light illuminates, your car is likely losing braking fluid or the brakes are so worn that you can’t stop as quickly as usual. Any of such circumstances calls for prompt attention and perhaps repairs.
Does the ABS light need to be reset?
Do the following to reset the dashboard warning light. A replacement ABS sensor, a screwdriver, and an OBD code reader are the very minimum tools required.
Note: Only carry out the following steps after fixing the ABS system’s issue. If you bring your car in for service, they ought to reset the light for you. However, if you perform maintenance on your own, you’ll also need to reset the light. If your ABS issue has been resolved, proceed to the next step.
AutoZone is able to reset ABS codes.
Unfortunately, reading your car’s codes is the only way to determine whether the ABS is the cause of the issue. As part of our Fix Finder service, AutoZone can scan your codes, or if you already have a scan tool, you can do it yourself.
What does ESC OFF signify?
I’m here. On the instrument panel is the electronic stability control (ESC) off indicator. When the ESC has been manually turned off, this light turns on. The electric stability control system has detected an error if the light came on while you were driving but the button was not depressed. A skilled mechanic’s warning light check would be the first step in the diagnosis process to ascertain what is malfunctioning.