How To Reprogram A Kia Key Fob

After locking all of the doors, turn the ignition key.
Till the door locks cycle, repeatedly turn the key off and on. Turn on the key to finish.
On the key fob, press the lock or unlock button. The key fob is configured to operate the doors if they lock or unlock.
Switch the ignition off.

In This Article...

My Kia key fob needs to be reset.

The Kia Key Fob Reset: How Do I Do It?

Make sure all of your doors are shut all the way before getting into the driver’s side.
When you hear the door locks cycle, turn the key repeatedly from off to on in the ignition.
Try pushing the Kia key fob’s lock or unlock button.
Return the ignition key to the off position.

Can you reconfigure a key fob?

I’m here. As long as the key is the same for each vehicle, you can reprogram a key fob to work with that vehicle. In this situation, if the key can open the doors, you would need to take the following actions:

The key fob’s battery should be removed and then replaced (unless you put in a new battery)
After unplugging the vehicle’s battery wires, wait 30 seconds, then reconnect them (reset computer).
Turn the key to the ON position after inserting it into the ignition.
In the OFF position, turn the key.
Locking the door simultaneously with your hand and the remote requires turning the key to the ON position.
While simultaneously using the remote and your hand to unlock the door, turn the key to the ON position.
Remove the ignition switch’s key.
the driver door with the key.
Push the lock and unlock buttons on the key fob simultaneously with locking and unlocking the door with the key – (do this 3 times).
Try using the remote to unlock the doors while the door is closed after taking the key out of the lock.
Put the key in the ignition switch and attempt to start the engine if the doors will lock.

After completing these procedures, the key fob has been successfully reprogrammed to your car if the engine starts. If the key does not lock the doors or start the engine, it may be completely different, and you will need to get a new key. Seek out a specialist, like one from Your Mechanic, if you require more help with your keyless entry system.

Replace the batteries inside the key fobs

If you haven’t changed the battery in the key fob(s) in a while, do so now before continuing. When you try to reprogram a key fob with a defective battery, it can be a real pain. The batteries are often inexpensive and simple to replace. If you are unsure how to change them, consult your owner’s manual.

Get inside the car

With your car keys and the remote in hand, go in the driver’s seat and lock all the doors. Closing the doors is crucial because if you leave one open, it can disrupt the procedure.

Turn on the ignition

Once seated, turn the key to the “On” position in the ignition to turn the electrical systems on. Do not start the engine and double-check that the ignition is not in the radio mode.

Press the lock button on the remote key

Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position. This notifies your electronic control units that the signal is coming from your key in the ignition and does save the info later. How to Start & Unlock a Car With a Dead Key Fob

Listen for a Lock Sound

You will hear the lock sound once you have completed the aforementioned steps. You have now accessed the programming mode, as indicated by this. Press the lock button once more in the following five seconds to complete the programming.

Programming additional remotes

If there are other remotes, program them successfully by pressing the “Lock” button within 10 seconds after entering the programming mode.

Step out from your car and test the result

Close all doors as you exit the vehicle and take your key fobs with you. Test the functionality of both unlocks with each of your key fobs that were programmed.

Why won’t my Kia key fob work?

The battery that powers your key fob is most likely to blame if it stops functioning. Typically, watch-sized batteries that are skillfully hidden inside the casing of key fobs are used. With a little screwdriver or key, you can easily peel the key fob apart and change the battery by yourself.

Finding out what kind of batteries they require and keeping one on handeither at home or in your glove boxis a good idea. If you have the batteries on hand, it will save you some effort and they are cheap, costing between $5 and $25. Finding them is not difficult. They ought to be in stock at your local Kia dealer. Additionally, you can locate them in grocery stores, hardware stores, and other stores. Make sure you choose the proper kind. The voltage output of many of these batteries varies despite their similar appearance.

After a battery change, does a key fob need to be reprogrammed?

A remote key fob needs to be associated with your vehicle particularly in order to be secure.

This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.

Standard programming sequence

Your key fob can typically be reconfigured by following this typical procedure:

Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.

You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.

Why doesn’t my automobile recognize my key fob?

The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available.

Use the key that is included in the spare fob if it is not available to unlock the door. Check your owner’s manual for information on how to start your automobile when the key fob malfunctions.

How much does it cost to get a key fob reprogrammed?

The cost of a locksmith to program a key fob often varies depending on the lock’s complexity, location, and kind of key.

How much does it cost to program a key fob?

The typical person who programs key fobs is a locksmith. Typically, key fob programming costs between $85 and $400.

Nowadays, most cars come standard with key fobs, also referred to as remote fobs. An additional remote fob with buttons that may lock and unlock the vehicle from the outside, the trunk, or the back hatch is included with car keys. In order to make opening several doors on a car easier, key fobs were created. In inclement weather or dangerous locations, it is useful.
The inconvenience of having to get your key fob reprogrammed is not convenient. You’ll need the assistance of a qualified professional if your key fob is lost, broken, or the battery dies. And that costs money. You have two choices: visit the original auto manufacturer’s dealership or a car locksmith.
Which option is preferable?
Locksmith or merchant?
A key fob can a locksmith program it? Depending on the circumstances. A locksmith would be your best bet if you accidentally locked your keys in your automobile. A dealer would be a preferable option if you needed a new key fob for your vehicle.
Do you desire financial savings? You should avoid the dealership and go to a locksmith instead if you want to save money on key fob programming. In comparison to the dealership, a locksmith provides cheaper costs along with other benefits.
What is the cost of programming a key fob?
Even though using a locksmith’s services is less expensive, you can still have pricing questions. How much does programming a key fob cost from a locksmith? The cost may be between $50 and $200. The real cost is determined by a number of variables, including:
the key fob’s type. It could be more expensive to reprogram the key fob than a standard key fob if it comes with a transponder key or keyless ignition. Transponder keys come with electronic chips that are required for the automobile to start. If a computer chip is necessary, trying to reprogram an existing key fob from a different car could not work in your present vehicle.
Your car’s model and make. Some manufacturers make reprogramming a key fob more difficult. Although that increases security, having to replace or reprogram the key fob raises the cost, which is not ideal.
How much do locksmith services in your area typically cost? To stay in business, locksmiths must maintain competition with one another. Depending on how much key fob programming services typically cost in a given state or city, the pricing may change. Regardless of where you live, hiring a locksmith will still be less expensive than going to a nearby dealership.
When You Might Need to Program Your Key Fob
When looking for auto key replacement near me, there are a number of various circumstances that could need key fob programming. These circumstances include:
The key fob was lost by you. Reprogramming an old key fob to work with your current vehicle is one option to save money if you lose your key fob. Depending on the sophistication of your car and the key fob, you may occasionally be able to achieve this. Additionally, you can acquire generic key fobs that a locksmith can program to work with most vehicle makes and models.
The key fob is broken on it. Your key fob might need to be reprogrammed if it breaks or ceases operating for any other reason. This may also occur if your keys fall into water or if another accident occurs. Key fobs can be repaired and reprogrammed, but if the damage is too severe, they could need to be replaced.
Your key fob’s battery is completely dead. It might not be enough to simply replace the battery in your key fob if the battery entirely dies. A key fob that has a dead battery may lose its memory, requiring reprogramming after a new battery has been inserted.

How can a key fob with a push-button start be programmed?

You may be able to program a keyless ignition fob for vehicles with a push-button starter in some circumstances. Even though it’s far from foolproof, it’s worth a shot before paying a dealer to program it for you.

Get into the driver’s seat and close the door behind you while holding the key fob in your hand. Prepare to place one hand on the key fob and the other on the start button of the car. You’ll need to work rapidly, just like the processes mentioned before, so get ready for that.
When you’re ready, quickly hit the start button on your car 15 times, with no more than two seconds passing between each try. Remember, you’re not actually trying to start the engine while doing this, so keep your foot off the brake.
Press the lock button on your fob after the fifteenth button press. The car doors will lock and the fob will be fully functional if the pairing process was completed. If the attempt failed, it could be worthwhile to try it again to determine if there was a mistake in the first attempt. The timing of this strategy can be a little tricky and challenging to master the first time.

Q: How do I know if my car key has a transponder?

Your key is a transponder key if it is inserted with the ignition off and the car’s computer system detects it without sounding a theft alert. A chip is typically located inside the head of transponder keys. If the key for your car costs a lot to buy, it should be a transponder key.

The hit-and-trial approach, which involves starting your car using a non-responder car key, can also be used to get the answer. A different type of key won’t start your car’s engine if it doesn’t have a responder key unless it is reprogrammed. If your car turns out to have a response system, the security system will interpret this as an attempt at theft, therefore you must be careful while doing this.

Q: Can you program a transponder key yourself?

You can program your transponder without the aid of a qualified transponder key programmer. If you follow the proper steps, you can complete this task alone. The simplicity of the programming depends on your car’s type, though. This programming normally takes forty to fifty minutes to complete and is done from within your car. But keep in mind that the transponder key can only start your car after programming.

Q: Can you program a transponder key with only one key?

You can program a transponder key even if you only have one functional key. To utilize just one key for programming, you must have unique keys, such as the KeylessOption transponder key. You must be knowledgeable with programming transponder keys for Ford or other car makes. The programming process is simple and easy to complete. Make sure the new transponder key you intend to program is the appropriate key for your car model at all times.

Q: Can you bypass the transponder key?

Of course, there are ways to get around a transponder key, and these ways vary. One method is to permanently rewire the ignition of your car. To completely have a keyless automobile, your car will need a new bypass kit.

Additionally, you can put another transponder key made for your specific vehicle model inside the ignition and start the engine for ten to eleven minutes. To bypass your transponder key with a new key, repeat this process more than three times. After that, remove the old transponder key from the ignition without starting your car.

Q: How much does it cost for a dealership to program a key?

Depending on the type of car and the key’s design, this can cost up to $2500. While writing a new key for a Lexus automobile might cost up to $375, programming a key for a BMW can cost up to $5500, depending on the model.

Depending on the intricacy and OEM, a new key can cost anywhere between $60 and $120 to program. While some dealerships may not charge for this, others may charge an hourly or half-hourly rate. Dealers charge $170 to program a new key and $80 for the fob for vehicles like the F-150.