Get rid of any
In This Article...
Are there any 2015 Kia Sorento recalls?
Kia Motors America (Kia) is recalling a select number of Optima and Sorento models from 2013 to 2015. The Hydraulic Electronic Control Unit (HECU) may experience brake fluid leakage, which could lead to an electrical short. Tip: Not all vehicles from the same year, make, and model are subject to recalls.
Service brakes, hydraulic: Antilock/traction control/electronic limited slip: Control unit/module
Certain 2013-2015 Optima and 2014-2015 Sorento vehicles that were previously recalled under recall 20V-519 are now being recalled by Kia Motors America (Kia). The Hydraulic Electronic Control Unit (HECU) may experience brake fluid leakage, which could lead to an electrical short.
A HECU electrical short increases the chance of a fire while stationary or moving.
Owners are urged to park their cars outside, away from other cars and buildings, until the recall fix is finished. Dealers will replace the multi-fuse for free, check the HECU for leaks, and replace it if necessary. On July 2, 2021, letters of owner notification were sent out. The prior NHTSA recall, number 20V-519, has been replaced by this one. Call 1-800-333-4542 to reach Kia customer support. The recall number for Kia is SC212.
A select number of 2013-2015 Kia Optimas and 2014-2015 Kia Sorentos are being recalled by Kia Motors America (Kia). The Hydraulic Electronic Control Unit (HECU) may experience brake fluid leakage, which could lead to an electrical short.
There is a higher chance of an engine compartment fire if the HECU shorts out.
Owners will be notified by Kia, and dealers will check the HECU for any brake fluid leaks and replace the HECU for free if necessary. Owners are urged to park their cars outside, away from other cars and buildings, until the recall fix is finished. On October 20, 2020, the recall started. Call 1-800-333-4542 to reach Kia customer support. SC197 is the Kia recall number.
Fuel system, gasoline, engine
Certain 2011-2017 Optima, 2012-2017 Sorento, and 2011-2018 Sportage cars are being recalled by Kia Motors America (Kia). These vehicles previously had their engines replaced under recall number 17V-224, warranty, or the Knock Sensor Detection System (KSDS) Product Improvement Campaign. During the engine replacement process, the high pressure fuel line that links to the fuel pump output may have been broken, misaligned, or poorly torqued, potentially leading to a fuel leak.
A fuel leak with an ignite source nearby can make a fire more likely.
Owners have been informed by Kia, and dealers will inspect and replace the fuel pipe for free as needed. beginning on January 17, 2019, the recall. Call 1-800-333-4542 to reach Kia customer support. SC172 is the Kia recall number.
Engine and engine cooling
Certain 2011-2014 Optima, 2012-2014 Sorento, and 2011-2013 Sportage cars are being recalled by Kia Motor Company (Kia). Premature bearing wear within the engine may result from machining flaws made during the engine construction process.
Owners will be notified by Kia, and dealers will inspect the engine assembly and, if necessary, replace the engine, free of charge. The start of the recall is anticipated for May 25, 2017. Call 1-800-333-4542 to reach Kia customer support. SC147 is the Kia recall number.
Power train: Axle assembly: Axle shaft
Certain front-wheel drive Sorento models for the 2014 model year that were built between January 7 and March 12, 2013, and fitted with 2.4 liter engines, are being recalled by Kia Motors Corp. The right front axle shaft can fracture as a result of a manufacturing problem.
A front axle fracture may cause the wheels to lose power. Additionally, if the parking brake is not engaged when the car is parked, it could roll away. Either circumstance raises the likelihood of a collision.
Owners will get notification from Kia, and dealers will replace the front axle shaft assembly at no cost. On September 9, 2013, the recall got under way. Owners can reach Kia by calling 1-800-333-4542. The Kia recall has the SC099 code.
How should my headlights be adjusted?
- Read the owner’s manual. Some automobiles don’t have a headlight adjusting feature. To find out whether your specific make and model allows for adjustment, examine the owner’s handbook. To find out where the adjusting screws are located, you need also consult the handbook. Similar to a carpenter’s level, certain automobiles contain leveling bubbles that aid in headlight adjustment. You may find the kind and placement of the adjustment screws in your owner’s handbook.
- Put the automobile on a level spot. Find a flat area where you may beam the headlights on a wall or a garage door. Make sure the car’s tires are properly inflated, that the petrol tank is at least halfway full, and try to simulate the weight that you would typically carry inside the automobile. Turn on the headlights while applying pressure to the car’s four corners to assist in balancing the shocks.
- Establish a central axis. It is better to complete this following stage at dawn or dusk. The distance between the car and the wall should be six feet. the low beam setting on your headlights. As the beam shines on the wall, use the masking tape to identify the horizontal and vertical axes of the beam. The tape should be placed such that it forms a cross.
- The difference between the two headlights should be measured. Check to determine if both headlights have the same measurement by using the measuring tape to measure the lines. The tallest centerline should be lowered to be the same height as the lowest centerline mark if the measurements don’t line up. Some cars have incorporated crosshairs in the headlight that make it simple to locate the beam’s center. This information can be found in your owner’s manual.
- Car is being backed away from the wall. Measure the area using the measuring tape at the approximate 25-foot distance suggested by your owner’s manual. Back the car up until the front wheels are at the 25-foot mark while maintaining a level surface. Turn on your headlights and observe where the marked area on the garage wall is struck by the brightest portion of the headlight’s beam.
- Get ready for the change.
- Remove the headlights’ ring or bezel to make way for the adjustment, keeping the pieces safely stored away. Make sure you have a screwdriver on available, along with some dark cardboard or fabric. Know where the vertical and horizontal adjuster screws are located. The actual adjustment operation is made easier with a helper inside the vehicle.
- Vertical field should be adjusted. Have the helper turn off the headlights while you are standing in front of the vehicle. Next, have the assistant switch on one headlight while you cover the other with the dark cloth or cardboard. Locate the adjusting screw and slowly move it in either the clockwise or counterclockwise direction to change the height of the lights. Ensure that the most intense portion of the headlight beam strikes at or just below the vertical centerline you marked with tape on the wall when you make your adjustment.
- the horizontal field, as necessary. To move the headlights inward or outward, turn the screws in either a clockwise or counterclockwise direction. Just to the right of the middle tapeline, the headlight beam should land. After making the necessary vertical and horizontal adjustments to the other headlamp, block out the modified headlight.
- Adjustments should be refined. Once the center axis of the headlight beam coincides with the tape marks on the wall, continue fiddling with the vertical and horizontal adjustments. Take the car for a test drive when you’re satisfied with the modifications, and if one of the headlights isn’t quite up to pace, repeat the steps above.
Are there any 2013 Kia Sorento recalls?
A number of 2011-2014 Optima, 2012-2014 Sorento, and 2011-2013 Sportage vehicles are being recalled by Kia Motor Company (Kia). Premature bearing wear within the engine may result from machining flaws made during the engine construction process.