How To Replace Kia Remote Battery

Kia Key Fob Instructions Generally

  • The front of the key fob should now be facing downward.
  • In the slot on the side of the fob, insert the point of a small flathead screwdriver (opposite the side that houses the mechanical key)
  • Take the key fob’s case off with little pressure.
  • Delete the previous battery.
  • Install the new battery.

A Kia key fob requires what kind of battery?

The fact that the conventional and smart key fobs for Kia share the same battery is one of their best features. A single 2032 battery is what you need to hunt for, and you should have no trouble finding one at any department, car, or online store. The coin-shaped battery in question is also known as a coin or CMOS battery.

Before we get started with the detailed replacement instructions, all you’ll need is a flathead screwdriver. Are you prepared to jump in and restore your key fob to its normal operating state? Let’s get going.

Why won’t my Kia key fob work?

The battery that powers your key fob is most likely to blame if it stops functioning. Typically, watch-sized batteries that are skillfully hidden inside the casing of key fobs are used. With a little screwdriver or key, you can easily peel the key fob apart and change the battery by yourself.

Finding out what kind of batteries they require and keeping one on handeither at home or in your glove boxis a good idea. If you have the batteries on hand, it will save you some effort and they are cheap, costing between $5 and $25. Finding them is not difficult. They ought to be in stock at your local Kia dealer. Additionally, you can locate them in grocery stores, hardware stores, and other stores. Make sure you choose the proper kind. The voltage output of many of these batteries varies despite their similar appearance.

How is a 2019 Kia key fob opened?

The mechanical key that pops out of the conventional Kia key fob when a button is pressed is utilized to start the engine. Although you can still start the engine and enter the car if the key fob battery runs out, it is undoubtedly more convenient to remotely unlock and lock the vehicle. The following are the steps for changing a normal Kia key fob battery:

  • Place the key fob so that its front is facing down and smooth surface.
  • On the side of the key, across from the key fob, look for a little slot. Once you’ve found it, carefully insert the flathead screwdriver into the slot and wedge it there until the case releases.
  • Remove the plastic casing gently, taking care not to scratch it or harm any internal parts.
  • Replace the old battery with a fresh one by removing the old one.
  • Reposition the plastic case and gently press the two fragments together to reunite them.

Standard programming sequence

Your key fob can typically be reconfigured by following this typical procedure:

Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.

You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.