- On older Kia models, activate the wipers, then take the key out as soon as they are in the highest position. This will make it simple for you to change the wiper blades.
- You must use the instrument cluster to put the wiper arms in the service position on more recent Kia vehicles. To understand how to make the Kia wipers stop at the top, see the video below.
- Wiper arm raised in the air.
- The wiper arm should be rotated perpendicular to the wiper blade assembly. Keep the wiper arm from touching the windshield. If the wiper arm unintentionally lands on the windshield, you could crack it.
- After compressing the clip, lower the blade assembly. Take away the wiper blade.
In This Article...
How are the wiper blades replaced on a 2020 Kia Forte?
How to Replace the Rain-X Wiper Blades on a 2020 Kia Forte
- Purchase your replacement Rain-X Weatherbeater wiper blades.
- Get your Kia Forte ready for a simpler wiper replacement.
- Your wipers should be raised off the windscreen.
- prior to removing outdated wiper blades.
- Take off the worn wiper blades.
- The new Rain-X Weatherbeater Wiper Blades should be connected.
Lift your wipers up from the windshield
It should be simple to lift your wipers up and away from your windshield once they are stopped halfway on your windshield. The old wipers on your windshield should protrude and point away from you. Now providing for simple access throughout the remaining modifying procedure.
Before you remove old wiper blades
Make sure to note which side the new blade length belongs on. Measure the previous blades’ length or simply compare it to the new Trico wiper blades. Then, position the fresh blades on the appropriate side.
Remove old wiper blades
The windshield wipers on your 2015 Kia Sorento connect to a little hook attachment on the vehicle. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.
Propping Wipers Up:
- protects the wiper motor in the event that you mistakenly leave the wipers on while turning on the ignition and they become stuck to the windshield.
- stops the rubber from getting damaged when you have to chisel the pieces off the windshield.
- makes it simpler to remove snow and ice from the windshield.
So Which Is Correct?
The American Automobile Association (AAA) asserts that leaving wipers up does not harm the springs and that lifting the wiper blades up before it gets icy will protect the rubber blade. It’s crucial to give your car enough time to warm up if you decide to leave the windows down so that the defroster can clear the windshield of any frozen windshield blades.
Is lifting the wiper blades a smart idea?
In addition, Elliott offered some suggestions that support raising the blades ahead of a snowfall or ice occurrence.
“When you get out to your automobile, lifting the wiper blades makes it simpler to scrape the windshield. Due to the rubber wiper blades not freezing to the glass and having to be scraped off by your scraper, it also lowers wear and strain on them “Elliot stated.
In the post, he also claimed that because the metallurgy is built to withstand this force, leaving your wipers on does not wear out the springs. The yield strength and dynamic range of the spring are not being exceeded by the raised wiper arm.
Elliot arrived at the conclusion that it boils down to convenience and preference after sifting through the available information.