Get a 9″ extension and a 12mm socket out. The computer bracket, which serves as the clamp to hold the battery base in place, must be taken off. Two bolts are visible near the negative terminal of the battery tray and one nut is visible as well.
After removing the terminals, a shroud that surrounds the battery’s exterior can be removed.
In This Article...
What socket is required for battery removal?
You want to replace your own automobile battery, but hold off for now. Before opening the hood of your car, gather the necessary tools.
Keep the baking soda and water solution on available if you’ve previously made it and need to use it to clean your terminals. The terminal cables need to be cleaned more thoroughly. If not, make a batch right away and add a fresh paintbrush to it for later.
Take a handful of the tools you’ll need out of your toolbox. By means of nuts and bolts, the battery terminal cables are kept tightly in place. Socket wrenches, adjustable wrenches, vise pliers, and crescent wrenches are required. Given that most automotive battery cables have nuts of this size attached, choose a 10mm (0.4 in) wrench or socket. Grab a second set of movable pliers to secure the bolt head as well.
Even if it sounds absurd, you should also pack a hammer. A terminal cable that is stuck to the terminal post may be released with a few light taps.
A battery terminal cleaner is another smart purchase. This practical and affordable tool is made to remove corrosion from the terminal posts and the cable end clamp. Additionally, it primes your new battery’s posts for a stronger connection to the terminal wires. A decent narrow metal wire brush may also work if you have one. Consider purchasing a can of corrosion prevention along with your terminal cleaner to assist avoid further sulfate accumulation.
Last but not least, pack a set of reliable gloves and safety glasses. As we’ll see in the following pages, batteries can be hazardous, so it’s a good idea to protect your hands and eyes. Additionally, if you have a Styrofoam cooler, bring the top with you so it may be used as a secure and practical tray for your tools. Also, don’t forget to pack a few rags.
What is the price of a Kia Soul battery?
How much would a new battery cost for my Kia? Prices for a replacement automobile battery varies from roughly $45 to $250 depending on power, size, and quality.
How can a Kia be reset once the battery has been removed?
Put the key in the ignition inside your Kia and turn it as far as it will go without the engine starting. For three seconds, hold down the lock button on your key fob until the dashboard lights begin to flicker. Your alarm system and computer have both been reset, and your key has been reprogrammed.
How can I remove the battery from my car?
Negative comes after the positive. Disconnect the negative cable from the old battery first, followed by the positive. Positive and negative connections for the new battery should be made in reverse order.
It can be difficult to remember which terminals to detach and which to rejoin while changing your car battery. But it’s crucial to connect them in the proper sequence.
Remember to first unplug the cables from the negative terminal, which is typically black and marked with a minus (-), before unplugging the cables from the positive terminal, which is typically red and marked with a plus (+). Always use caution when touching a metal object to both of the battery’s terminals at once.
Once the connections are disconnected, release the clamps holding the battery in place and carefully remove it out of the battery tray.
Make sure the wires and both terminals are rust-free before installing the new battery. You can clean them with water, baking soda, and a wire brush if they are rusted.
After that, set the battery’s terminals correctly on the battery tray and drop it onto it before clamping it. Connect the new battery now by connecting the positive terminal first and then the negative terminal in the reverse order. Ensure that the battery is properly fastened.
What happens if the positive terminal is disconnected first?
In order to perform any electrical work on your car, you typically need to first disconnect the battery. This quick guide will outline the ideal course of action. DisclaimerBecause every automobile is different, always consult your owner’s manual for information on how to find and disconnect the battery. To avoid any grease, oil, or electrical sparks while performing this workout, rubber gloves may come in handy. Do not hesitate to ask a car repair for assistance if you have any concerns regarding the process.
Locate the battery
Under the hood of your car, you should locate the battery in a rectangular box. However, many more recent vehicles now have a battery cover with a battery symbol on top that you must slide off or pull up in order to access the terminals. If you’re having trouble finding the battery, consider consulting your manual for the precise placement.
Recognising positive and negative/ground terminals
Finding the positive and negative terminals is a good idea after that. The positive terminal will typically display a “+” sign, whereas the negative terminal will typically display a ” symbol. Sometimes the positive cable may be red and the negative may be blue, however please carefully check your manual in case this is different.
Negative first
Negative battery connections must be made first; removing the positive side of the battery first could result in an electrical short. For instance, if you unintentionally drop a spanner on the positive terminal and the spanner comes into contact with any other metal part of the automobile, you risk shorting the battery or, even worse, shocking yourself. Loosen the connector, then carefully pry the clasp off the termination to release the negative cable. The positive connector is then removed in a similar manner. Use a plastic tie or something similar to secure the connectors to something that keeps them out of the way and off of any metal surfaces on the car while they are detached.
Reconnecting the car batterypositive first
Replace the connections back onto the terminals when you’re done working on your car’s electrical system. To avoid short circuits, be sure to reconnect the positive terminal first and the negative terminal later, starting the process the same way you ended it. To guarantee a tight fit, push the connector back on and give it a good wiggle. Avoid contacting the negative connector with any other metal parts of the car. When re-connecting the negative terminal, you might see a tiny spark, but this is normal and shouldn’t be harmful. Simply put, you are restarting the car’s electrical circuit.
Cover the battery and close the bonnet
After reconnecting the battery, all that is needed to do is reinstall any battery covers you removed earlier and close the hood. I’m hoping the electrical work you did turned out well! If you discover that you aren’t receiving any electrical power, make sure the terminals are clear of debris and try again. If that didn’t work, touching any metal on the car’s body and the negative terminal could have shorted the battery.
What size nut is on the terminal of a battery?
The appropriate size of any bolt is crucial because the wrong size of battery bolt might harm your battery and your vehicle. Battery bolts hold your battery in place. You can properly tighten the parts of your car by using the correct size bolt. Have you ever wondered what size the battery bolts are? What sizes are available for battery bolts? we asked experts. Here is what they gave us.
The most typical battery bolt will have a bolt length of 1.24 inches, a bolt thread size of 5/16 inches, and a nut that is around 10 millimeters or 0.4 inches in diameter. Various sizes of battery bolts, including 8 millimeters (0.3 inches), 11 millimeters (0.43 inches), 12 millimeters (0.47 inches), and 13 millimeters, may also be available (0.5 inches).
It will be easier to prevent connection issues between your car and your batteries if your bolts are the proper size. Additionally, if you use a bolt that is too large or lengthy for your battery, you risk damaging it. It is better to speak with a mechanic or take your batteries to one if you are unclear of the bolt size you require. Continue reading the material below for more details on automobile batteries.
Which battery size is used by a 2013 Kia Soul?
For the best possible vehicle performance, it is advised that you continue using the normal battery that came with your 2013 Kia Soul, the DieHard Silver Battery, Group Size 121R, 600 CCA (Part No. 121R-2).
It can be difficult to decide whether to remain with the factory-issued battery type or if you’d like to try something new while looking for a replacement battery for your car. Here, we’ll outline your alternatives so you can choose the ideal 2013 Kia Soul battery.
A Kia Soul EV is what?
Based on the Kia Soul, the Kia Soul EV is an all-electric subcompact crossover SUV made by Kia. It is also referred to as the Kia e-Soul. The 2020 Kia Soul EV’s official range, according to the US Environmental Protection Agency (EPA), is 243 miles (391 km). [1]
In May 2014, South Korea started receiving deliveries of the first generation.
[2]
[3] Throughout July 2014, sales in Europe started.
Sales began in the United States in October 2014;[5] at first, it was only offered in California, Oregon, and a number of Eastern states with the most developed EV infrastructure and markets, such as New York, New Jersey, and Maryland.
[4] In January 2016, global sales passed the 10,000 unit barrier, with 6,770 units sold in Europe being the largest market.
[6] As of December 2015, Germany had sold 3,853 units, making it the largest European market.
[7]
[8]
For the 2020 model year, a second generation was released in 2019 and went on sale in Canada and Europe. For the US market, a postponement till 2021 was made. [9][10]