I’m sorry that occurred! It’s simple to access the gas tank on a Kia Soul.
Start by entering the Kia Soul and searching for a small lever with an icon of a gas tank on it. On the driver’s side, this is frequently on the floor’s left side.
Pull up on this lever when you’ve located it. The gas tank will be popped open as a result. Now that the gas tank door is open, you can move over to the side of the vehicle. The gas cap can then be removed in order to access the gas tank.
It’s a good idea to make sure you have rental car insurance before you start driving when you’re borrowing a car. In the event that the car sustains unanticipated damage while you are renting it, you may be confident that your wallet is protected.
If you want to make sure you have the best insurance coverage, Jerry is an excellent place to start. The Jerry Super app, a registered broker, handles all the tedious work of obtaining affordable estimates from the most well-known insurance providers and purchasing new auto insurance. Jerry will even assist you with rescinding your prior coverage.
Jerry will also send you fresh quotations each time your policy is up for renewal, ensuring that you always have the best rate and that you always have the coverage you want.
In This Article...
The gas tank opening button is where, exactly?
If the lever cannot be located in the typical location, and unlocking the doors is ineffective, seek elsewhere for a little button that says “fuel dispenser.” This button will either be on the driver’s side armrest or the right side of the steering wheel (such as the Mahindra XUV) (example, the Tata Safari). When the automobile is stopped, press this button, and the lid will open.
Although powered and electric choices are simple to use, they may have problems. The fuel tank cap won’t open in such a situation no matter what. Manufacturers do, however, offer a manual override feature that is accessed by opening the boot. For information on the precise position and what should be done next, consult the owner’s manual. You will typically find a detachable flap on the inside of the boot, usually on the same side as the fuel lid. To release the gasoline lid, open this flap, find a knob, and spin it as directed.
This car hack will undoubtedly be useful at some point. Use the social media links below to share this with your friends if you found it helpful. Visit our “Car Maintenance” section for more simple car maintenance advice.
Please leave a comment below to share your thoughts on this story. Additionally, if you’re considering selling your old automobile, visit the CARS24 homepage to find out the current market value in only two minutes!
How do I operate my petrol station?
It’s crucial to discuss ownership rights to any existing tanks and pumps when buying the property where your gas station will be located.
When learning how to open a petrol station, this step is crucial: Verify whether ownership of the pumps and tanks will be transferred to your name prior to signing the purchase agreement. To ascertain the equipment’s remaining “shelf life,” you need also look into its repair history. This will determine if you should reuse the current equipment or buy new.
Please remember to add an environmental contingency clause in your purchase agreement’s draft. After the purchase agreement is signed, you are permitted to learn more about the property’s environmental history thanks to this clause. You have the right to cancel the sale and receive a refund of your deposit if an environmental site evaluation produces adverse results.
Secure a gas supplier contract
It’s critical to comprehend how you’ll refuel your gas tank on a frequent basis. To find the best local wholesalers to supply your station with fuel, do some research. You should conduct a careful rate comparison to make sure you are maximizing your own profit margins since gas providers frequently get a percentage of your sales.
Check your franchise agreement if you are running a franchise to see whether they already have a preferred gas supplier.
Once more, have a lawyer evaluate your gas supplier contract and franchise agreement to make sure you are maximizing earnings and avoiding any hidden fees.
Obtain necessary permits and licenses
The permissions and licenses required to start a gas station will differ from state to state. Make careful to research the company regulations in your specific state. In general, the following would necessitate obtaining permits:
Get business insurance
We strongly advise you to purchase business insurance to safeguard your enterprise. Daily dangers associated with running a gas station might include theft, worker injuries, equipment failure, property damage, and more. You and your assets are kept safe by insurance.
We’ll match you with an insurance partner who can assist you in obtaining estimates after you respond to a few questions.
How come my gas tank won’t open?
As was already said, rust and debris accumulation are frequent causes of your gas tank plastic flap not opening or closing properly. Rust, corrosion buildup caused by rust, and a damaged or severely bent flap are further causes of this.
Rust Build-Up
Rust accumulation on the metal gas tank flap’s hinge or latch is one of the most frequent reasons why it won’t open. To fix this problem, disassemble the seal with a flathead screwdriver and remove the rust with a rag. While you’re about it, spray WD40 on both parts to prevent future corrosion or rust growth!
Broken Metal Flap Spring
Another common cause of your metal gas tank flap not opening or closing is a broken metal flap spring. If necessary, disassemble the seal with a flathead screwdriver to access the spring and replace it to solve the problem.
Corrosion Build-up
There’s a good probability your metal gas tank flap has corroded if you discover that it won’t open or close. The best course of action in this situation is to disassemble the seal using a flathead screwdriver and examine it for rust or corrosion. After removing the rust using a rag, WD40 should be applied on the item.
Broken Latch
Last but not least, a damaged gas tank flap latch can prevent the metal gas tank flap from opening or closing. Bend the latch back into its original position if the plastic is still intact and not broken. However, you will need to repair this component if it has rust or is damaged.
Damaged Release Cable
Your metal gas tank flap may also be unable to open or close if the release cable is seriously damaged. If this occurs, you will need to replace the release cable wire in order for your gas cap to open properly.
My gas cap won’t open, why?
A car owner may find it to be one of the most annoying situations to arrive at a gas station with a stuck gas cap lid or fuel door. It always seems like “Murphy” and his “Law” show up when it’s least expected. This is the situation when you realize that the gasoline door on your car won’t open properly.
There are a few ways to identify the issue, so you may speak with a local expert technician and get the damaged gas cap cover repaired. The issue could be caused by an internal spring, a lack of lubrication, a bent fuel door, or issues with the activator lever or button inside the car.
Some of the most popular methods for determining why your car’s fuel door won’t open are listed below.
How is the gasoline cap on a Kia Ceed opened?
1. Press the center edge of the lid to release it.
2. Open the lid completely (1).
3. Rotate the cap counterclockwise to release it.
4. Fill up as necessary.
How do you fill up a car with gas?
If at all feasible, fill your tank in the morning. This is so that the fuel, which is underground and will cool off overnight, may be used. Because fuel is more dense when it is cold, you get a tiny bit more fuel per gallon than when it is warm. Although this is a very small sum, it is better than nothing.
Put the pump nozzle into the fuel filler in step two. Place the handle of the nozzle there after quickly inserting it all the way into your gasoline filling. To ensure that the automatic shutoff system operates as intended, make sure the tip is put all the way.
Step 3: Depress the pump’s handle and lock it in position. A small metal tab or hook that can be used to lock the handle in the open position can be seen once the handle has been depressed. Set that, and when the time comes, the pump will turn off on its own.
Keep your hands and arms off the nozzle. Though tempting, doing so could harm your fuel filler neck as well as the pump’s nozzle.
Additionally, you’ll see that the gasoline pump is keeping track of how much petrol you’ve pumped and how much it cost.
- A blocked carbon canister, for example, could indicate a problem with the vapor recovery system if the pump abruptly shuts off multiple times.
Step 5: Move quickly and wait. You simply wait here until the petrol tank gets filled. Under no circumstances should you leave the pump running unattended. Even if the pump shut off malfunctioned, you are usually responsible for any spills or overflows that occur.
You can check your fluid levels or clean your windshield at the designated window wash station, but you shouldn’t ever be more than a few feet away from the gas pump.
* Pro tip: To avoid having to hold the fuel nozzle the entire time you fill your tank, you can typically lower a little lever on the handle of the nozzle. This keeps the trigger engaged.
- Avoid overfilling your petrol tank. As a result, fuel will leak from the tank and flow onto the ground. When your tank is full or the amount you pre-paid is exhausted, the pump should immediately stop operating.
Don’t top off the tank in step six. It will automatically turn off once it has finished dispensing fuel. When the pump turns itself off, don’t top it off. Continuing to fill up could cause damage to the onboard vapor recovery system.
A crucial emissions device called the vapor recovery system is made to recover gasoline tank vapors and burn them in the engine as opposed to releasing them into the atmosphere.
- To prevent drips, point the nozzle straight up after pulling it straight out. Avoid banging the filler neck with the gasoline nozzle. All of it is constructed of non-ferrous metals, so there shouldn’t be any sparks, but it could harm the pump nozzle and the filler neck’s sealing surface.
Step 7 is to put the nozzle back on the holder. If you had to push a lever up to start the gasoline pump, make sure to switch it back down before putting the nozzle back in its holder.
To make sure that the fuel tank is sealed, you will either tighten the fuel cap until it clicks once and then stops suddenly, or you will tighten it until it clicks at least three times.
The automobile may turn on the check engine light or, in some newer models, the check gas cap light if the gasoline tank doesn’t seal properly.
9th step: gather your receipt. Make sure to take a receipt from the printer if you decided to acquire one.
Choose not to obtain a receipt at all if you don’t require one for tax or refund purposes.
- Reminder: Most receipts are printed on thermal paper that is activated by a BPA coating. Bisphenol A, also known as BPA, is known to cause cancer. In fact, handling too many receipts might raise your body’s BPA levels.
Your trip odometer can be used to determine your miles. Every time you fill up with petrol, start over on your adventure. Divide the distance traveled since the last fill-up by the amount of gallons it takes to fill the tank back up before you refuel and before you reset the trip odometer. This is much more accurate than the onboard computers, but it only functions if you fill the tank every time.
If you followed the preceding instructions without any problems, you have now successfully filled your automobile with fuel. YourMechanic’s mobile mechanics may come to you and solve the issue if you’re having any difficulties taking the gasoline cap off or putting the cap back on.