Now that fall has arrived, many things, like the pressure in your tires, are shifting. Although there are several benefits to maintaining your tires properly, your safety on the road is the main one. Tire care is sometimes neglected, but you should check your tires’ pressure frequently, and even more frequently as the weather becomes colder. This week, we’ll go into more detail about the reasons, occasions, and methods for checking. Let’s get going!
Why is it significant?
According to the National Highway Traffic Safety Administration, under-inflated tires are more likely to be damaged or fail on a road. They will degrade more quickly, which can increase the likelihood of tire blowouts, crashes, and loss of control in addition to the rate at which they will wear out. For every PSI (pound per square inch) your tire pressure falls below the optimum level, your gas mileage will likewise decline by.2 percent. Depending on your driving patterns and the car you drive, maintaining properly inflated tires could potentially result in gas efficiency savings of up to 3%.
Once a year:
Even a set of brand-new tires can lose air, and the following factors can influence tire pressure:
- hot and cold temperatures that are extreme.
- long distance travel
- hauling extra weight inside your automobile or towing.
Since daily use can cause your tires to lose several pounds of pressure, many tire and vehicle manufacturers advise checking your tires’ pressure at least once a month. It’s crucial to observe whether temperatures are rising or falling because tires react quickly to variations in temperature and can rapidly lose pressure without your knowledge. Another reason to examine your tires is that faulty valve systems, small punctures, and other concealed damage can cause air pressure to drop.
How to test:
It simply takes a few minutes to check the air pressure in your tires, whether you do it at home or at the gas station. The most accurate reading will be provided if you check when your tires are cold or before you leave for a long day of driving. Buy a tire pressure gauge if you don’t already have one. And an excellent one at that. Here’s how to check the pressure in your tires:
- Take off the end caps from the air valves on your tires.
- To get a reading, insert the tire pressure gauge into the valve stem and apply pressure.
- Check the reading and compare it to the PSI that is suggested for your car and its tires.
- In order to release some air, press on the valve if the reading is higher than the advised PSI. If the PSI reading is under, add air to the tire until it is at the proper pressure.
In This Article...
Where is the gauge for tire pressure?
The gauge cluster on an automobile’s dashboard is normally where the tire-pressure warning lights are positioned. Warning lights typically have an exclamation point and/or the letters “TPMS” and look like a cross section of a tire in yellow or amber. One may be seen immediately to the left of the speedometer in the image above. When the tire-pressure monitoring system of the vehicle detects low air pressure in one or more tires, this little indicator glows to let you know (TPMS).
The light often illuminates when one or more tires have air pressure that is outside the ideal range. Since the tires’ ideal performance and safety benefits are only seen within a certain range of air pressure, expressed in pounds per square inch (psi), the warning light may turn on even before low pressure is apparent to the naked eye by as little as 10%.
The more advanced tire-pressure monitoring systems, including some spare tire systems, can sometimes display the air pressure in each tire in real-time or alert drivers to which tire is out of range.
Don’t ignore the tire-pressure warning light if it turns on; you might be getting a flat.
A tire’s tendency to lose around a pound of air pressure each month and a pound for every 10 degrees of temperature change can cause low pressure, as can leaks. Therefore, even if your tires are adequately filled in the summer, they can be too low by the winter to trigger the tire-pressure alarm. Similar to this, if the temperature rises high enough to raise the tires’ pressure to a safe level, a tire-pressure light that illuminates on a cool morning may turn off. Another reason the TPMS warning may be on early in the morning and turn off later in the day is because as you drive, tires warm up and experience an internal pressure increase of roughly 3 psi.
It’s time to check your tires’ pressure with a tire-pressure gauge, which can be purchased for as little as $5, whenever a tire-pressure warning light illuminates. A monthly tire pressure check can help you maintain your tires’ ideal levels of inflation and will give you the opportunity to spot slow leaks earlypossibly even before the pressure goes too low and the warning light illuminates.
This information was imported. At their website, you might be able to discover the same material in a different format or more details.
On a Kia, where is the TPMS button?
You might be wondering where the TPMS reset button is if you have a Kia Soul and the tire pressure light has turned on. Do not be alarmed; we are here to assist. We’ll demonstrate where to find and how to use the reset button in this blog post. For more details, continue reading!
The Kia TPMS button is situated next to the horn, to the right of the steering wheel. You must hold down the button for roughly five seconds in order to reset the system. Release the button once the light has gone out. Your TPMS has now been successfully reset.
One of the best tire pressure monitoring systems (TPMS) on the market is included with the Kia Soul. When the pressure in one or more of your tires drops below the acceptable level, this device will notify you.
What does TPMS button do?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
Why is the Tire Pressure Light Flashing On Kia Forte?
It is rather simple to fix the tire pressure indicator if it appears on the dashboard, but if it flashes it can mean that there is another issue. Since batteries are required to power the tire pressure sensors, this could be an indication that the batteries are defective or simply need to be replaced. It can also indicate that there is a problem with the TPMS sensors in your tires. You should be able to pinpoint the source of the issue with your car with a fast visit to a nearby garage.
Where is a TPMS reset button on a Kia Forte?
Simply press and hold the reset switch, which is next to your steering wheel. The light will blink three times and alert the tire sensors.
Why is my tire pressure light on when tires are fine?
When one or more of your tires lose more than 25% of their pressure, the TPMS light illuminates. Check the pressure in each tire before inflating the tires because you believe the pressure is off.
How much air should be in a Kia Forte tire?
For both the front and rear tires of the 2019 Kia Forte, the recommended tire pressure is 33 psi. By looking at the plate inside the driver’s door, you can find the required tire pressures for your specific vehicle.
Conclusion
With features and versions to fit a range of demands and budgets, the Kia Forte is a terrific, dependable vehicle. Your Kia Forte tire pressure light should now be fixed, and we hope that we were able to help you by giving you some important information.
How are the tire pressures checked on a 2014 Kia Soul?
Tire pressure monitoring system (TPMS) for the Kia Soul and tire inspection
- In the assistance mode on the cluster, you can check the tire pressure.
- After driving for half a minute, tire pressure is shown.
- When the car is stopped and the tire pressure is not visible, the message “Drive to show” appears.
How much pressure should the tires on a 2016 Kia Forte be?
The Kia Forte is one of the fastest-rising sedans in America in terms of both quality and appeal. It is efficient, swift, and generally enjoyable to drive. Every time you go behind the wheel, it can provide you the greatest return on investment, but it can only do this if its tires are properly inflated. The 2019 Kia Forte’s recommended tire pressure will be shown today by our Boucher Kia sales team so you can know what setting you should maintain them at at all times.
Optimal tire pressure of 2019 Kia Forte wheel sizes
You should strive to maintain your tires at a Pound per Square Inch (psi) value of 32-34 psi for 16-inch wheels in order to maintain your Forte model’s handling, cornering, and braking as effectively as possible. Any pressure reading between 34 and 36 psi should work if your car has 17-inch wheels. However, be careful not to excessively or under-inflate your tires as this could result in decreased fuel efficiency and a less comfortable ride.
However, based on the trim arrangement, each Forte model varies, therefore you should only consider this guideline to be an estimate. You should refer to your owner’s manual or the plaque on your driver’s side door for a more thorough explanation of the ideal pressure level for your vehicle.
How can I turn off the Kia Forte’s tire pressure warning light?
Turn the key to the “On” position before getting inside your automobile, but don’t let the engine run. When the tire pressure light blinks three times, release the button while still holding down the TPMS reset button. Start the car next, and the sensor should refresh after 20 minutes.
Which tire is low, and how do you know?
Do not freak out if you forgot your pressure gauge at home. You can also use your hands to check the pressure in your tires.
Put your hand on the tire and push down. Low tire pressure will result in a soft, mushy tire. The tire is overinflated if it feels like rock and you cannot apply any pressure to it at all.
Keep your touch on the tire and pump air into it if it seems too low. To feel the tire pressure, keep pushing down. If the tire is initially overinflated, gradually let some air out while checking for softness along the way. You need to be able to gently press into the tire.
How can I tell whether my vehicle has a TPMS?
The simplest method is to observe the dashboard indication lights when the engine starts. Alternately, just start the car by turning the ignition switch to the “ON” or “AUX” position. On the dashboard, look for a TPMS warning light. Additionally, you might look through the owner’s manual for the car.
The tire pressure symbol is what?
You don’t realize anything until a light on your dashboard turns on “Why does it matter? Are you serious? Should I have my car inspected?” Some dashboard warning lights are only alerts or indicators, while others are warnings that your car or one of its parts might be gravely damaged. All of us at Sullivan Tire and Auto Service are here to identify and clarify the common dashboard indicators, even though some are more visible than others.
Please consult your vehicle’s owner manual or make an appointment with Sullivan Tire and Auto Service to get the precise meaning of any symbols on your dashboard that may not be included below.
Tire Pressure Warning Light
The tire pressure warning signal, also referred to as the TPMS symbol, signifies that one of your tires has either too little or too much air pressure. To prevent serious harm to your tire or vehicle, you must immediately correct the air pressure in your tire(s).
Why does the low tire pressure indicator remain on?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one tire on your vehicle may not be inflated to the appropriate level by at least 25%.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.