Learn how to replace the wiper blades on your Kia Rio. Decide on a Rio year below. The instructions have been tailored to the precise wiper blade connector on your Kia Rio.
In This Article...
How are windshield wipers installed on a 2013 Kia Rio?
On your Rio, begin on the driver’s side. The majority of blades are secured by a small clip. As if sliding the blade along the wiper arm, push that clip up toward the arm while pushing the blade backward.
Lift your wipers up from the windshield
It should be simple to lift your wipers up and away from your windshield once they are stopped halfway on your windshield. The old wipers on your windshield should protrude and point away from you. Now providing for simple access throughout the remaining modifying procedure.
Before you remove old wiper blades
Make sure to note which side the new blade length belongs on. Measure the previous blades’ length or simply compare it to the new Trico wiper blades. Then, position the fresh blades on the appropriate side.
Remove old wiper blades
There is a tiny hook attachment on your 2018 Kia Rio that the windshield wipers can attach to. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.
How big should my Kia Rio windshield wipers be?
Windshield Wiper Blade Size for a 2020 Kia Rio The wiper blade sizes for the 2020 Kia Rio are 26″ on the driver’s side, 16″ on the passenger’s side, and 12″ on the back.
How are wiper blades changed on a 2015 Kia Sportage?
When the wipers are halfway down your windshield, turn on your wipers before turning off your Kia Sportage.
The windshield wipers can be connected to a little hook connector on your 2015 Kia Sportage. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.
How do you take the Kia Rio’s rear wiper blades off?
- Get rid of the old blade. Off the window, lift the wiper arm.
- Take away the wiper. The wiper will gently click free from the wiper arm once it has been turned.
- Put the replacement blade in place. Put the replacement wiper blade’s little bar attachment into the wiper arm’s hook.
- The blade should be secured.
- Done!
How are the wiper blades replaced on a 2017 Kia Forte?
When the wipers are halfway down your windshield, turn on your wipers before turning off your Kia Forte.
There is a little hook attachment on your 2017 Kia Forte that the windshield wipers can attach to. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.
On a Kia Picanto, how do you replace the rear wiper blade?
Let’s complete this.
- Put the wiper arm in the service position by lifting it.
- To release the wiperblade from the holder, pull it forward.
- Once it is in the T position, keep pulling.
- Slide out the previous blade. New blade inserted into holding clip.
- When the clips are repositioned, pull the blade rearward.
How are windshield wiper blades changed?
You can save money on certain very simple car maintenance jobs by performing them yourself, as we’ve learned over the years. Additionally, even if it’s a small operation, fixing anything with your own two hands provides an inner sense of joy.
Let’s add replacing your windshield wipers to that list by demonstrating how to do it. It will only take you around 15 minutes (less once you’ve done it a few times) and you’ll save $10 to $15 per wiper blade compared to getting it done at a business. Yes, that’s not a lot of money, but every little bit helps in the fight against debt, and you’re also gaining a little bit of independence in the process.
When Should You Replace Your Wiper Blades?
Simply evaluating the efficacy of your wiper blades while driving is the simplest approach to determine whether you need new ones. Is the windshield still wet and/or dirty after the wipers have finished, or at least the regions they have covered? After each blade pass, is there any remaining film or debris? Do you find yourself wanting to peer through a single tiny piece of properly cleared windshield while it is pouring or snowing and your wipers are operating? It’s time for new blades if you respond positively to any one or more of these questions.
Additionally, if your wipers rattle and don’t glide across the window smoothly, they need to be replaced. Finally, you could perform a visual examination. It’s time for a replacement if the rubber appears to be worn or fractured. Depending on how frequently you use them and the environment you’re in, this typically occurs once a year, but it may occur more frequently or less.
In the end, if your wipers aren’t working anymore and you’re finding it difficult to see the road during rain and snow showers, replace them.
How to Buy Wiper Blades
What is referred to as a hook-type wiper blade is used by the vast majority of vehicles on the road. This alludes to the method through which the blade is joined to the wiper arm. Although there are many different types of blades, as long as the connection is of the hook variety, the task will be incredibly simple. The majority of wipers look like this, and many of them can now adapt to any connection style, including hook-type, pin-type, and other varieties. You can buy wipers on Amazon. For instance, the adaptor for this Rain-X blade is advertised as being compatible with more than 95% of automobiles on the road. If you’d rather not guess, you can go to any auto parts store (AutoZone, O’Reilly’s, etc.) and ask them to look up what will work for your car; they’ll all have that information on hand.
It’s convenient that Amazon also allows you to enter information about your car and will display blades that work with it.
Measure what is already on your automobile if you want to do the legwork yourself (it doesn’t hurt to know firsthand). Your two blades are likely different sizes (with the driver’s side blade being longer), and you can get blades in sizes ranging from 12-28. For illustration purposes, the driver’s side blade on our automobile is 26 whereas the passenger’s side is 17. Make sure to flatten the blade before measuring it rather than attempting to do it while it is curled.
You might feel a little daunted by the options when you first enter a store to purchase wiper blades. Blades can cost up to $20 each or as little as $10. How do you decide what to do? Finding a happy medium is basically the advice that is given everywhere. The most expensive item is not necessary, but neither should you get the cheapest item. I purchased blades for about $13 each (they were slightly different prices since they were different lengths). Always replace both blades at once, even if only one is worn out because the other is probably not far away.
Every time you replace your blades, you can experiment and test out various pricing points; just make sure not to mix and match brands and price points on your windshield at any particular moment.
How to Change Your Wiper Blades
1. Take fresh blades out of their packing and have them ready. The wiper arm is made of metal, so it’s ideal to have the new blade ready as soon as you remove the old one so you can swap it out straight away. When handling packages, you don’t want to risk having your wiper arm fall or be knocked against your windshield, perhaps chipping or damaging it. Although unlikely, it is nonetheless feasible.
2. After raising the wiper, turn the blade so that it is parallel to the arm and look for the release tab.
This release tab will not be present on all wipers. On some, you’ll just pull down while rotating the blade perpendicular.
3. Pull the blade downward while pressing the tab. Despite your natural inclination to pull up, resist the urge. It won’t get your blade off, but you won’t cause any damage.
4. After that, pull the blade off by rotating it parallel to the arm. It’s that simple! Seriously.
5. To install the new blade, repeat step 5 in reverse. Start threading it parallel to the arm, turn it perpendicular, thread it into the slot, and then draw it up just enough to hold it in place. To ensure that the blade is now securely fastened, you should hear some form of audible click or at the very least feel that it has been snapped in.
a fresh blade. This one features a rotating portion into which the hook locks. Don’t worry, even though I had never done it before, I was able to figure out how the blade actually snaps into place just fine.
6. Perform a test using wiper fluid. Squirt some water on your windshield to see how the new blades work. Be proud of your accomplishment and a little embarrassed that you have never performed this really easy DIY auto repair operation before. (I am speaking to myself here, yes.)