Contact a locksmith, but be ready to re-bend your door. In order to get a tool inside and unlock your Kia Soul, locksmiths will lift the door away from the body using a wedge and a pump-up tool.
A slim jim would work if you had a general manager, but you would also have to deal with the GM’s easy steal features.
Simply take the top of the door away from the body if you wish to DIY. As I said before, locksmiths will first use a plastic wedge to pull the door out a little at the top, and then they’ll use a pump-up wedge to open it further without harming the paint. If I were you, I’d use a wood wedge to prop open the top of the door, providing you have 24s handy, then sneak inside and deactivate the power door lock using a coat hanger. If you decide to do it, open the door on the side you wedged before opening the other to prevent any damage to the latch. Given that the sill at the top of the Kia Soul door is constructed to restrict simple access, you might even have more luck pressing the hatch release button.
I am a locksmith with AAA. There are three approaches you can take. As everyone has mentioned, the long rod (extension tool) can be used with the door wedge. It is much simpler to pull the handle back than the lock mechanism itself. You may also use this to open the handle if you have a tool that is designed to go inside the Kia Soul and come up through the interior of the window. The handle only needs to be opened about 1/4 of the way before it unlocks. IL man, I wish I was there. Only an L-shaped tool (L tool), which is nearly impossible to find unless you’re lucky, will function inside the actual door. If you want to try the L, the internal door mechanism is about 6 inches below the handle, near to the back of the door. Once you’ve located the Bellcrank, you must fumble with it and then turn it clockwise. The hardest route is the last one.
Ask if lockout assistance is available by calling the local police non-emergency line.
What is contained in your lockout kit for the Kia Soul? Don’t even attempt it if it’s the slim-jim. If you don’t perform it correctly, you risk breaking the lock and being completely helpless.
If you have a wedge of some kind and the long metal bar (not a flat piece, that’s the slim-jim), you can drag the top of the door back and gain approximately an inch (enough room to get the bar through). Once the bar is in place, you can either attempt to push the manual lock or, if you have power locks, press the lock button. Another option is to try pulling the handle.
I’ve managed to lock my keys in the car six times this year, so I’m good at it. Asking the dealer where you purchased the Kia Soul if they can produce you a key without the cip is a good idea. I keep the free one in my wallet because it is thin.
In This Article...
How can a car door be opened without the key outside?
The usage of fancy key fobs, touchpads, and remote-unlock sensors in some more recent vehicles virtually ensures that you won’t get locked out. But what about the millions of poor souls who still manually lock and unlock their vehicles? Will they always be bothered by automobile windows that are shattered and prybars?
It is entirely possible to get your keys out of a locked car with a little patience, experience, and even more patience, and you probably won’t need to go to an auto body shop nearby to have your window fixed afterward. Here are some pointers for entering your locked automobile safely. (Bad people shouldn’t read any farther.)
Without a key, how do you unlock a car door?
When you’re locked out, Bright Side has discovered a few workarounds that can let you back in.
- Tennis ball is the first technique.
- Use your shoelace for Method #2.
- Utilize a coat hanger as method #3.
- Utilize a rod and a screwdriver for method #4.
- 5th Approach: Apply a spatula.
- Use an inflatable wedge as method #6.
- Use a plastic strip as Method #7.
How do I get inside my car?
You might need to break into your car to get your keys out if you’ve locked them inside. A coat hanger or thin metal implement can be used to unlock a locked car door. It is extremely simple to lock yourself out of your automobile, and you will run into serious trouble if your key is locked inside the vehicle or is lost without a backup key nearby. Sometimes people are compelled to take drastic means to retrieve their keys that have been locked inside of their automobile; others even break a window to gain entry. When shattered, tempered glass is specially treated to shatter into thousands of pieces. In an accident, there won’t be large pieces of flying glass that way. Knowing the right technique for breaking into a car will save you the money and effort of breaking a window open and cleaning up the broken glass. Several approaches are available for you to test out because they don’t require any specialized tools or prior locksmithing experience. The option to call a professional Houston locksmith expert is typically available, but there might not be one nearby or you can have a long wait. Auto locksmiths are crucial.
Method 1: Unlock A Door From The Inside Of A Car With Manual Locks
Open the top of the automobile door just wide enough with a tool as a wedge (a strong airbag is used by professionals) so that a metal rod can be wrapped around the locking pan and pulled up to release the pin and unlock the door. It is crucial that the method utilized takes into account the unique type of lock on the car.
Step OneUse A Tool Or Wedge
To hold the door’s space, use your tool or wedge. To create a space between the car’s body and the window or door frame at the top of the door, use something thin.
Step TwoSlide Tool In The Door Gap
Enter the door gap with your tool. After that, insert your tool into the area between the car’s body and the top of the door’s side opposite the hinge (that corner is one the will put out the most). Pull open a gap with your finger to make room for the tool to pass through.
Step ThreeInsert Tool Until Visible
Insert your tool further till it is visible. As soon as you can see it through the automobile window, slowly lower and insert the tool into space.
Step FiveUse Hook To Open Lock
To unlock the lock, use the hook. To create a space large enough to fit the tool inside the car, use your wedge. Using the tool, grasp the door’s locking pin and pull up until the door unlocks.
Method 2: From The Inside, Unlock A Car Door That Has Automatic Locks
The same steps that are utilized with manual locks are employed to separate the top portion of the car door from its body. Simply make a space with a long, narrow object like a wedge. Next, use a different tool to push the “unlock button.” How easy or difficult it is to pull the door away from the car’s body and where the switch or button regulating the locks is positioned both affect how challenging it is to open an automated lock from the outside.
Step OneHow Are The Car Locks Activated?
Find out how to operate the car’s locks. The activation of automatic locks can be done in a variety of ways. Verify where the car’s unlock button is located to see if it is on the console or the driver’s side.
Step Two: Press On Car Button
To press the button, make a loop or hook tool. Some automated locks feature a simple button on the driver’s side armrest. Using a tool like a straight metal rod, one can reach this button and press it to unlock the door. You might require a tool to seek for or a hook at the end if the button is difficult to reach or if it is a switch. Trial and error is the greatest way to learn what works.
How do you use a screwdriver to unlock a locked car?
- Carefully place the screwdriver between the door and the frame. This could result in your door bending or your lock breaking if you apply too much force.
- Put a wire coat hanger or another tool with a similar form inside your automobile and use it to push the unlock button once you can see the screwdriver’s tip inside.
- To protect your door and the locking system of your car, take out the screwdriver before opening the door.
Call a locksmith if you are unable to access the locking mechanism or are concerned about damaging your door.
Try Jerry if you’re concerned that this will happen again. For as little as $4.16 a month, Jerrys roadside assistance memberships give you access to industry-leading roadside help that includes services like towing, lockout assistance, and a mechanics hotline.
How can a paperclip be used to open a car lock?
We appreciate your interest in Marie Claire. An email for verification will arrive shortly.
You may have wished you knew how to pick locks, skillfully turning a piece of lint into a lock-picking instrument if you’ve ever found yourself breaking into your own house through the bathroom window. Always check your purse. You can pick a padlock in a matter of minutes if you have two paper clips lying around, and you’ll have bragging rights for days thereafter.
1. Create a tension wrench and a pick out of paper clips. The “pick” or initial paper clip should be straightened out fully.
2. Open the end of the second paper clip into a “L” shape to create a tension wrench.
3. Insert the paper clip with the tension wrench into the keyhole’s bottom and push it in.
4. Next, insert the pick into the shear line at the top of the keyhole. The shear line is composed of pins that fit into low grooves on the lock’s key. Place the straight paper clip against the pins in the shear line at the top of the keyhole.
5. As you rake across the pins with your pick paper clip inserted into the top of the keyhole, you ought to be able to feel the pins push up. Apply a little stress to the end of the tension wrench paper clip as you swiftly remove the pick paper clip by raking it up against the pins. In order to unlock the lock, you’ll be turning your key normally in either a clockwise or counterclockwise manner as you apply stress. When you apply exactly the appropriate amount of tension with the pick, tension wrench, and paper clips, it works! You should be inside drinking a congratulatory beer with the door unlocked.
Still stuck on the front stoop, number six. Practice makes perfect. You probably won’t get this right the first time, so if you frequently lose your keys, you might want to get it right now. Practice on a lock inside your house is your best bet. It’s likely to startle the neighbors if you attempt it on your apartment building’s front door.
Can locks on car doors be picked?
Yikes! Yes, it is possible to pick a car door lock, but doing so often requires considerable expertise and practice. One typical technique is to use a bobby pin.
The basic steps are as follows:
- Pick up a bobby pin, spread it out, and bend it into a V.
- Remove the rubber caps from the bobby pins’ two ends.
- Try to wiggle the lock into the open position by inserting both ends of the bobby pin and moving it up and down.
If you still have trouble, consider these more advice:
- Call a member of the family who has access to extra keys.
- Do you have access to roadside support? If so, make an aid request via the 800 number.
- Call a tow truck company or a locksmith.
We all make mistakes from time to time, like locking our keys in the car. But one error you shouldn’t do is purchasing the incorrect expensive auto insurance. Why? because Jerry is there.
The quickest method to locate a vehicle insurance plan made specifically for you is through Jerry. Jerry will handle the rest after performing a thorough cross-analysis of the best prices offered by different providers. Your top choice’s phone calls, paperwork, and renewals will be taken care of so you don’t have to. They can even assist you in canceling your old insurance!
With a paperclip, how can you open a door without a key?
The exterior knob of the majority of interior locksets has a pinhole for emergencies. One paper clip that has been straightened out can be used in place of the pinhole door knob key in order to open one of these locks. To unlock the door, push on the paper clip after inserting it into the pinhole.