If the system notices a decline in psi, the flat tire warning light on your dashboard will turn on.
It is crucial that you pull over as soon as this light illuminates on your dashboard to examine your tires for any holes or deflation. If you wait until the light is on as a maintenance reminder, it may cause hazardous driving conditions.
Driving on a flat tire is risky since it increases the tire’s internal structural deterioration, which can result in poor handling, accidents, and even damage to the rims and suspension.
1) If your Q50 has a Smart Key Button, push the start button twice without touching the brake pedal. Turn the key to start the ignition but do not fully start the engine.
2) Press the Menu button on the center console. The Menu button is next to the screen panel in the bottom row.
3) Choose the Settings Menu – From the touchscreen, choose the settings menu.
4) Choose Meter from the list of menus that show on the screen.
5) Choose Maintenance – Once more, a number of selections will show up.
6) Choose Tire. From here, you can reset the one that is now shown in your car and create reminders for intervals of time.
Keep in mind that you should always check your car’s tires on a frequent basis, especially before any lengthy trips, as your car won’t prompt you to do so as often as necessary if the gap between reminders is increased.
If your car has just undergone maintenance, the mechanic will probably take care of this for you, but now that you know how, you’ll be prepared if this problem ever occurs.
In This Article...
How can I reset the flat tire on my INFINITI Q50?
It’s quite simple to reset the flat tire alert on Your INFINITIQ50. You won’t need to spend more than 10 to 15 minutes on it. The first thing you must do is unlock the door on the driver’s side and enter the car. The ignition should now be in the on position. Always be careful not to actually start the engine when doing this. Locate and press the TPMS, or tire pressure monitoring system, button. Hold the button down until three consecutive flashes of light are seen. Start the engine of Your car at this point. The alarm should be reset after waiting between 22 and 25 minutes before attempting to drive.
Click the “On” switch to turn off the INFINITI Q50 flat tire alert without starting the car. When the light pulses three times, click the TPMS reset button and hold it there until you can unlock it. Turn on the engine and give the sensor 20 minutes to run. The tire pressure control reset button is often located under the steering wheel.
How do I reset my flat tire light? wouldn’t be a question if we were aware that there was a TPMS Reset Button and where it was. If someone asks how to change a flat tire, telling them it’s simple—just replace the flat tire with a tire that isn’t flat—is about as helpful as telling them to hit the tire reset button without explaining where it is. Please provide a detailed response that includes both what to do and where to do it, step by step.
The screen’s rpm button serves as the only button on the newer Q50. A light will blink on your dash if you select Settings, then Meter, and then just keep the TPMs option pushed.
I’ve really looked under the steering wheel, but I can’t find the reset button.
This solution is not available online. Every website I’ve looked at just says to press the button without ever mentioning where the f**king thing is, so apparently it’s some type of secret.
A trip to the dealer is necessary to reset the flat tire warning. For some reason, they had to connect the automobile to reset. Only because I had to have it done twice do I know.
A scan tool is required to reset infinity. Dealer will do it at no cost. I left $2 for the service department employee. Spend no time messing around with the dash’s buttons and display.
After having a run-flat tire fixed there, I returned my Q50 to Discount Tire. In just a few minutes, they were able to reset the car’s computer using a hand-held electrical gadget.
Infiniti Q50 Maintenance Tire Rotation Light: Tire Reset (2014-2021)
Tire Resetting: Infiniti Q50 Upkeep Light for Tire Rotation (2014-2021) The Infiniti Q50 is a mid-range passenger automobile that has been in production since the spring of 2013 and is the G37’s replacement. At the Detroit Auto Show in January 2013, the car made its public debut.
The first Infiniti to receive the new designation, which consists of a Q and a two-digit production number, is the Q50. The entire model line was given a new nomenclature by Infiniti when the Q50 was introduced in 2013.
Will the check engine light automatically turn off?
If the problem or code that caused your INFINITI Q50’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will immediately switch off after the gas cap is tightened. Similarly, if your catalytic converter is in good operating order and you conducted a lot of stop-and-go driving, the check engine light may have come on as a result of the high converter consumption. Your INFINITI Q50’s light will typically turn off after 20 to 40 miles. You must bring your vehicle to Nalley INFINITI of Atlanta if you exceed that limit and the light remains on so that the light and code can be verified twice and reset.
SERPRESULT
How can I turn my INFINITI’s check engine light off? Let it go off on its own, repeatedly start and stop your car, and disconnect your battery.
How is the flat tire alert on an Infiniti Q50 2020 reset?
Tire Pressure Warning Light 1) Press the start button twice on your Q50’s Smart Key Button to turn the ignition on without fully starting the engine. Avoid pressing the brake pedal.
Why does my Q50 not work properly?
Warning Light for Malfunction The malfunction indicator is an engine-like yellow light. It can mean your fuel cap is unfastened or that there is a problem with your emissions. If adjusting the gasoline cap doesn’t fix the problem, you should hire a specialist to look into the source.
How can I check the tire pressure on my Infiniti?
- You must first measure each tire in order to set the tire pressure correctly.
- Remove the valve caps from each tire, then push the pressure gauge on the valve stem.
- Make sure you hold on firmly and securely, and the tool should display the pressure right now.
Is a spare tire included with the Infiniti Q50?
You’re already aware that your Q50 lacks a spare tire. Like many automakers, Infiniti does not offer this crucial lifesaving feature. Modern Spare aspires to unquestionably be the top manufacturer and supplier of full spare tire kits. We have considered every factor when creating our Modern Spare designs.