Enhanced Member
Well, I’ve been trying to find information about how to take off the headlights on my Qx for the last few days on this site and the internet in general because for some reason I started getting water in my passenger side headlight. Well, to cut a long story short, I figured it out and I hope it helps someone else.
1) To access the two screws at the bottom of the headlamp directly behind the top of the bumper, first remove the fog light. The first screw is above the foglight. The second is trickier because it’s closer to the grill, but there’s room to attack it from both sides and there’s enough space between the bumper and the headlight to see what you’re doing.
2) Remove the plastic wheel well cover to gain access to the screw holding the fender to the car’s bumper at the precise corner.
3. Open the hood and remove the plastic headlight cover, which is secured in place by five plastic push-on screws. At this point, you can reach the headlamp electrical socket (only plug between headlight and car) The top of the radiator support has the first screw, and the inside of the headlight has the second.
4) Your headlamp is now loose; BE PATIENT. You must proceed carefully and fiddle with it as you remove it.
Your headlight is now broken; replace any necessary bulbs or whatever it was that caused you to go through this, lol.
I hope this helps someone else out there; if there was another post on this, I apologize as I didn’t notice it. It took me around 20 minutes.
In This Article...
Re: QX56 Headlight Assembly Removal
Insert a tube that has air flowing through it at low pressure. from a compressor or any other air source.
In about 30 minutes, the condensate will be evaporated by the dry air. By heating the process, you can accelerate it.
Water will undoubtedly return, but this is an easy fix that doesn’t need taking apart the assembly.
How is a headlight assembly changed?
- First, take out the outdated headlamp assembly.
- Disconnect the assembly in step two.
- To remove the headlamp retaining ring from the headlamp, turn it counterclockwise.
- Step 3: Cut off the electricity.
- 4. Remove the previous assembly.
- Replace the assembly in step five.
- Connect the new assembly in step six.
Are the headlights on the 2014 Nissan Altima being recalled?
A judge has given preliminary permission to a settlement for the hypothetical class action described on this page, and the official settlement website is now operational at the following URL:
On July 26, 2021, United States District Judge William L. Campbell, Jr. approved the agreement, stating that it is “fair, reasonable, and adequate” for Altima drivers. The settlement only applies to Nissan Altimas with halogen headlamps from the 2013 to 2018 model years. Xenon or LED headlamps are not included by the settlement. You can read more about the exact models covered and uncovered by the agreement here.
For eligible Altima drivers, the following relief is offered:
- reimbursement for headlamps that need to be changed because of fading before October 25, 2021;
- an addition of three years to the guarantee covering headlamp dimming brought on by delamination, raising the total warranty time to six years;
- For owners whose vehicles are still covered by the six-year extended warranty, Nissan will pay for an immediate headlight replacement from an authorized dealer, and
- For Altimas that are or will be outside the extended warranty period as of January 2022, a single headlight replacement from an authorized dealer.
Owners and lessees of Nissan Altimas who meet the requirements can submit a claim for out-of-pocket costs associated with headlamp replacements here. (Note: According to the settlement website, the online form will be available on or around August 12.) The application for reimbursement must be submitted no later than April 25, 2022.
Drivers of Altima vehicles who are past the six-year extended warranty period will receive a postcard notice from the administrator once the settlement goes into effect informing them that they have 65 days to complete a form asking for free headlight replacements. After that, a six-month window will open up for customers to get free headlamp replacements from a licensed Nissan dealer.
Even if you don’t take any action, you will still be covered and receive a three-year extension of the warranty on your Altima’s headlamps.
On the settlement website, you can find answers to frequently asked issues.
On a Chevy Silverado, how do you switch on the daytime running lights?
With new features, the Chevy Silverado has returned and is now the most powerful and technologically advanced truck in its class. This vehicle offers the best highway fuel efficiency when compared to other trucks on the road with a whooping 33MPG thanks to the Duramax 3.0L Turbo Diesel engine. The Silverado is outfitted with innovative technologies to deliver a stylish and safer driving in addition to being prepared for a smooth and efficient drive. The driver was put first in the design of the 2018 Chevy Silverado, which has improved camera views and daytime running headlights.
Visit Powers Swain Chevy near Fayetteville, North Carolina, to see the Chevy Silverado’s striking new design for yourself. Browse through our amazing variety of Silverados. Come by and discover why the Chevy Silverado is one of the most in-demand pickups on the road right now.
For additional information about the Chevy Silverado daytime running lights, continue reading below.
A feature that makes your truck more visible while driving is the daytime running lights. Regular headlights are made to be used at night to brighten the road and give the driver more visibility of the path ahead. The Daytime Running Lights are far less bright than ordinary headlights and are always on when the engine is running. The main purpose of daytime running lights is to make you more visible to other drivers while you are driving. The Daytime Running Lights will enable other drivers to be aware of you rather than forcing you to use strong headlights when driving in the early morning or late evening when vision isn’t an issue. The Chevy Silverado’s daytime running lights not only serve their intended purpose but also highlight the front of the car. The Silverado’s daytime running lights are popular with drivers. Here’s how to turn on or off your daytime running lights.
When the engine is running and the vehicle is in drive, the daytime running lights are programmed to switch on automatically. The Daytime Running Lights will automatically come on if the headlights are not on or are in the parking mode. The lights should come on as long as all of these requirements are satisfied. When using the conventional headlights, these lights are not required and won’t turn on at the same time. When it’s dark outside, you should always use your regular headlights. The dawn and dusk hours are when daytime running lights are most effective.
Ask us any questions you may have about the latest technology the Silverado offers when you stop by Powers Swain Chevy. You can ask a member of our friendly staff to explain why daytime running lights are so desirable to automobile buyers. We would delighted to show you the additional innovative innovations in the 2018 Chevy Silverado. Don’t take our word for it; visit Power Swain Chevy and see for yourself.