With the push of a button, users of INFINITI’s amazing HomeLink Transceiver can control anything from their garage door to their house or office lighting.
See the setup and programming instructions for your HomeLink garage door opener in the guide below, and enjoy all the benefits of owning a new INFINITI car or SUV in the Phoenix area!
The system’s memory gets cleared in this way. (Do this only once or your programming will be erased.) Holding the button down until the red indicator light flashes is necessary (about 20 seconds).
Check your car to determine where HomeLink might be located—it could be on the rearview mirror, visor, or front console. All three places must follow the instructions.
Select the HomeLink button you want to use to configure your garage door to open, then press it and hold your handheld transmitter at the same time.
It ought to start out gently blinking before starting to flash quickly (about 90 seconds). You can release the buttons once the light has stopped flashing.
The majority of openers produced after 1996 have this additional security feature, therefore you’ll need to climb a ladder and press the “smart” or “learn” button on the motor.
Instead of witnessing a light flash constantly after completing the next-to-last step above, you will see a light flash for just two seconds before solidly illuminating.
You just need to do the following to get past the code protection:
Your opener’s “smart” button must be depressed and then released. NOTE: You have 30 seconds to finish the following step. A second person assisting should make everything go more easily.
Obtain them For two seconds, firmly press and then release the HomeLink button that was previously preset in your automobile. Three times through this process.
Want more assistance setting up INFINITI HomeLink? If you come see us at INFINITI on Camelback, one of our helpful staff members will be pleased to assist you.
In This Article...
Owners of Infiniti, Begin Here
Trying to set up your Infiniti’s HomeLink? The steps you must take to quickly and easily train your HomeLink are explained in the video on the right side of the page. The most frequently required video will start playing immediately, however we have added manufacturer-specific movies below the main player for some garage door openers.
Not a fan of video? By selecting your vehicle’s model name from the list below, you may also get comprehensive instructions tailored to your particular model.
Choose your training films from the list below the main video for Infiniti owners who use a garage door opener made by Genie, Sommer, or who have an older model of HomeLink (model years 2008 and earlier).
the Chief
The steps are as follows:
NOTE: For HomeLink training and/or operation, some vehicles may require the ignition to be turned on or to the second (or “accessory” or ACC) position. In order to speed up training and ensure correct radio frequency transmission, it is also advised that a fresh battery be installed in the hand-held transmitter of the device being trained to HomeLink. 1. Press and hold the two outer HomeLink buttons for 20 seconds to begin initial training. Only let go when the HomeLink indicator light starts to flash. When training the additional HomeLink buttons, avoid performing this step.
2. Keep the HomeLink indicator light visible and place the handheld transmitter 1-3 inches away from the HomeLink surface (which is on your mirror).
3. Press and hold the hand-held transmitter button and the selected HomeLink button with both hands at the same time. Release only when the HomeLink indicator light starts to blink gently, then quickly. Both buttons may be released if the indicator light flashes quickly. (Successful training is shown by the quick flashing.) Observation: For some garage door openers, you might need to swap out step 3 with the “cycling” method described in the “View Canadian Instructions” section.
4. Press and hold the HomeLink button to train it, then look to see if the indicator light is on.
When training is finished, the device should turn on when the HomeLink button is pressed and released if the indicator light is solid or continuous.
If a rolling code device’s indicator light blinks rapidly for two seconds before becoming solid or continuous, follow the next set of training instructions. The subsequent processes might go more quickly and easily with a second person. Please make use of a ladder or another tool. Don’t carry out the subsequent actions while standing on your car.
6. Push the “learn” or “smart” button and then release it (the name and color of the button may vary by manufacturer). NOTE: After pressing the button, you have 30 seconds to start the subsequent process.
7. Go back to the car and push and hold the trained HomeLink button firmly for two seconds before letting go. To finish the training, repeat the “press/hold/release” cycle up to three times. Your device should now be turned on via HomeLink. Keep the original hand-held transmitter of the RF device you are programming for future HomeLink programming and use in other cars. Additionally, it is advised that the programmed HomeLink buttons be deleted for security reasons after the car has been sold. Follow the steps in step number 1 to delete the coded buttons. ** Start with step two to teach more HomeLink buttons.
I need to know how to set up my Infiniti garage door opener.
I finally cleaned out my garage so I have a cool spot to park my dad’s 2012 Infiniti this summer. But I can’t get the garage door open! I need to know how to set up my Infiniti garage door opener.
In less than two minutes, find out if your auto insurance is being overcharged.
In just a few easy steps, you can setup your Infiniti garage door opener, however it is simpler with two individuals.
Voici what to do:
- Locate the buttons for HomeLink. Usually, they are on the front console or the rearview mirror.
- Pressing and holding the two outside HomeLink buttons for roughly 20 seconds will clear the system memory. Watch for the red indication light to flash.
- Hold the garage door remote control one to three inches away from the HomeLink buttons, choose the desired HomeLink button, and then simultaneously press the HomeLink and transmitter buttons.
- The indication lights should first blink before remaining on.
- Press the Smart button on the garage opener’s motor during the next 30 seconds. To get there, a ladder could be necessary.
- Afterward, hold down the HomeLink button you just preset for two seconds before letting go. This should be done twice more.
- The indicator light should now be completely red.
Having more money in your pocket is another way to enjoy your summer. To start saving money right away, download Jerry, the insurance comparison smart app! Jerry consumers save an average of $800+ each year on auto insurance by offering a thorough cross-analysis of the best policies from several providers.
Rooster
You now have a new opener, and it employs a shifting random security code. That implies that programming your home connection remote involves an additional step. On your new opener box, there is a security button that you must press in order to begin programming. You will hold the remote up to the home link mirror and hit both buttons as usual, get out of the car, use a step ladder to click the security code button on the garage opener, and then repeat by pressing the remote and home link buttons in the vehicle.
Read the part in your users handbook titled “Home Link Program” for more detailed instructions.
Instructions
By pressing any button, the HomeLink transceiver can be tested (red indicator light should come on)
2
Press and hold the HomeLink’s exterior buttons simultaneously until the red indication light appears to clear all channels.
3\s\s a
When the “red indicator light” appears, press the button you want to preset and turn on the handheld transceiver.
4
Hold down the HomeLink and handheld transceiver buttons until the red indicator light begins to blink “rapidly” (this).
maybe 1–30 seconds), then let go. Now you can replace your handheld transceiver with HomeLink.
Note
Repeat steps 3 and 4 in a different button on the sunvisor’s HomeLink if you need to program more transceivers.
How can my Infiniti HomeLink be reset?
1. To start, hold down the two outer HomeLink(r) buttons for a few seconds to clear the memory. Hold both buttons down until the indicator light starts to flash (this should take about 20 seconds). Let go of the buttons
How is HomeLink synced?
Release the HomeLink(r) system’s two exterior buttons after pressing and holding them until the LED begins to blink. Return to the vehicle and push the pre-programmed HomeLink (r) button four times while the LED on the garage door opener is blinking. (Or up to the point the garage door opens)
Without a remote, how do I program my Infiniti garage door?
Without a remote control, it is impossible to program a garage door opener. But the buttons on your car’s garage door opener can be reset using your remote transmitter. Alternatively, you can operate the door without a remote by using an electronic keypad.
- Press the program and arrow buttons at the same time on keypads. Before choosing your own, restore the brand’s default code.
- Press the two “end buttons” on control boxes to erase prior settings. Then sync your car’s buttons using the remote control.
Why won’t my HomeLink function?
Interference close to the house or car, the use of stale batteries in the original transmitter during programming, or other factors can affect range.
- Your handheld transmitter needs a fresh battery. More power is drawn from the battery when the HomeLink(r) is being trained than when you press the doorbell button. It can occasionally assist the portable transmitter pick up a better signal and extend its range by replacing the battery.
- Retrain the HomeLink by moving it to various positions and angles. Hold the portable transmitter 3 to 4 inches from the buttons at first, then 5 to 6 and even 6 to 8 inches. This can occasionally aid in obtaining a stronger HomeLink signal.
- Make use of fresh batteries in a second transmitter.
- Adjust the antenna wire that hangs from the motorhead of the garage door opener.
Exists a HomeLink mobile app?
Install the App Now that HomeLink Connect(r) is available for iOS and Android, you can conveniently control all of your car-to-home automation devices from the front seat.
The HomeLink button is what, exactly?
A widely used and trusted vehicle-based wireless control system is Homelink. You can use it to effortlessly open and close your front gate and garage door, turn on and off your home’s security system, and control your lighting, appliances, and electronics.