A dead battery, an alternator issue, or a bad starter are the three most frequent causes of a Hyundai Santa Fe not starting. To speak with a specialist about your problem, look through our network of RepairPal Certified stores close you.
In This Article...
Hyundai Santa Fe won’t crank or start when the key is turned in the ignition:
When the ignition key is in the “Start” position and nothing happens, the starter motor is not turning the engine over. Most frequently, a low or dead battery or an absence of a connection between the battery and starter could be to blame.
Check the connections between the terminal cables and the battery. If the battery posts and cable connectors appear to be seriously corroded, you should either replace the cables or clean them before attempting to start the engine. Check the starter as well. Both the internal components and the solenoid at the top of the starter can malfunction. Replace the starter solenoid, contacts, assembly, or starter circuit as necessary.
stalls while speeding up much above 2500 rpm
It initially began to stall when traveling great distances. However, a week later, it began to happen more frequently, and now it won’t start. The scanner displays a code that refers to quick speeds and a circuit break. I’d appreciate your assistance.
I advise you to inspect your vehicle’s flow and turning sensors. When this is harmed, the vehicle stalls. Try first wiping them out with a cleaner designed specifically for electrical parts, then unplugging the battery for 30 minutes, reconnecting it, and then giving it another go.
Can you use a key to start a Hyundai Santa Fe?
Vehicles that also have keyless entry typically come with a remote start feature as well. Without having to get inside the car, remote starting enables drivers to warm up or cool down the interior before driving. If the Hyundai Santa Fe has this feature, we have spoken with automotive professionals. Here is what they gave us.
The key FOB can be used to enable the Hyundai Santa Fe’s remote start capability. The following steps will enable the remote start on your car:
- Get your key FOB ready.
- Activate the lock button.
- the “Hold” button while holding it down.
- Press the unlock button to get into your car.
You can start your car remotely from a distance of up to 500 feet by using this feature. Since you may warm the interior and defrost the windshield before driving, this option is excellent, especially in colder climates. Continue reading the article below for more details about the Hyundai Santa Fe.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
How do I use my Hyundai Santa Fe key fob for remote starting?
- Once on the lock button
- Headlights will flash, and a confirmation beep will sound.
- To hold, press the “hold” button on the key fob’s bottom.
- You can proceed now that the automobile is turned on.
After locking the door, you should hold the remote start button for 4 seconds. It only works if the button is held down for at least 2 seconds.
Once your Hyundai is started, the previously selected settings for the heating and cooling systems will operate. If no additional action is taken after 10 minutes, the car will turn off once more. The automobile will turn off if you hit the remote start button once more.
If your Hyundai has Bluelink technology, which enables your car to communicate with a smartphone, you can start your Hyundai right away from your phone. In fact, you may set the temperature to your preference and turn on features like the defroster. Three years of free maintenance are included with Bluelink-equipped Hyundai automobiles. You can manage features like locking and unlocking your doors, on-demand notifications, diagnostics, and even a remote auto locator tool for those busy days of shopping or following a performance.
For a variety of factors, remote starting is all about convenience. Everything from changing the cabin’s temperature to jump-starting your engine to just alerting the other passengers that it’s time to leave may be done using remote start. The ability to start a car without leaving the house or skip the grocery store checkout line are typically the first things that come to mind, although different people value different kinds of convenience. There are various advantages of Santa Fe remote starts to take into account:
The CoPilot app isn’t just for purchasing a car; it can also be used to keep track of recalls and receive recommendations on which regular maintenance activities are most crucial.
My car won’t start, but the battery is fine. Why?
Your starter may be the issue if the battery appears to be in good condition. A starter is a little motor that uses battery power to pull current in order to start an engine. When you turn the key in the ignition, you can hear a clicking sound if the starter fails or malfunctions. In some cases, loose connections are the issue, while in others, a new starter may be required. There is no assurance that jumping a car will fix starter issues.
How does a Hyundai auto start?
By simultaneously pushing the Lock and Remote Start buttons within three seconds, the Remote Start feature can be used. Your Hyundai will be inspected by the system to determine whether it is safe to start it. If it is, the engine will start after 5 seconds and run for up to 15 minutes. To turn off the engine, press and hold the Start button once more for two seconds.
Why won’t my car start despite a good battery?
If your car’s battery is in good condition but it still won’t start, there may be a problem with the fuel or ignition systems. Insufficient gasoline, a bad starter, a bad ignition switch, a blocked fuel filter, a poor fuel pump, a worn timing belt, or a weak ignition coil are a few more typical causes.
Be sure to try one of the straightforward solutions described above to get your car started and on the road to the mechanic, even though a jumpstart is not a cure for any of these problems and some of them are probably going to require an expensive repair!
Does the Santa Fe have remote starting?
Yes, remote start is available for the 2020 Hyundai Santa Fe. You can also subscribe to the remote start software and start your car from your smartphone if you have BlueLink.
How long does the battery in a Hyundai Santa Fe last?
Battery life for the Hyundai Santa Fe is typically between three and five years, although it can vary based on factors including driving style, environmental factors, battery type, and more. Your Santa Fe battery’s lifespan can be increased by doing the following: Keeping your vehicle indoors and away from abrupt changes in temperature or climate
Why won’t my Hyundai key turn?
If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.
When your car won’t start but the battery is still functional, what does it mean?
The car may not start even when it clicks when attempting to start due to a weak battery, filthy battery terminals, a damaged starter motor, or a blocked solenoid. There are a few techniques to try before using the jumper cables or electric jump starter even if it could just need a jump start.
How can you use a key to start a Hyundai without a key?
Hyundai Digital Key, which enables the Sonata to be unlocked, locked, started, and driven with a smartphone, is a new feature that will debut on the 2020 Sonata. The technology also enables the main user to grant three additional users access to the Digital Key. A “shared key” can truly be sent to a recipient from a great distance away.
Holding your smartphone up to the driver or passenger door handle unlocks the car using Hyundai Digital Key. Simply put the phone in the wireless charger once inside, hit the starter, and drive away. Hyundai Digital Key uses Near Field Communication (NFC) technology for security, which, unlike Bluetooth, necessitates that the smartphone and scanner be a few centimeters apart in order to operate the vehicle. When you are nearby your automobile, nobody else can simply open the doors and start the engine because of the close proximity.
There is no Hyundai Digital Key for iPhones, however it is compatible with the majority of Android phones. The Hyundai Digital Key system may be configured using the free Digital Key App, which can be downloaded from the Google Play Store. Although you can lock and start your car without the app open, it also has Bluetooth-enabled features that let you do other things like engage other features when the app is open.
Hyundai Digital Key eliminates the need for the Sonata’s two smart keys, which still come with the vehicle and allow for passive entry and keyless start. Additionally, you’ll get an NFC Key Card that you can keep in your wallet and use as a backup phone for iPhone users, for valet services, while you leave the Sonata for maintenance, or if your Android phone runs out of battery.
Hyundai Digital Key, the most recent development in car and smartphone connection, makes its debut on the 2020 Sonata and will likely be a feature on upcoming models that Hyundai introduces or redesigns.
Why does my brake pedal seem so stiff and won’t start?
The majority of contemporary automobiles include power assist, which depends on a brake vacuum to function. If you’ve been applying pressure to the brakes while the engine is off, you may have exhausted the reserve vacuum in the vehicle. As a result, your brake pedal will become stiff.
How can you use a dead key fob to unlock a Hyundai?
To remove the mechanical key, pull the key ring while pressing and holding the release button on the remote control’s rear, close to the top. To unlock the driver’s door, use the key.
What sensors could prevent an automobile from starting?
Frequently, a malfunctioning crankshaft or camshaft sensor is to blame for an engine that will turn over but not start.
All contemporary engines are loaded with engine management sensors that provide real-time data to the ECU. Both good and terrible things may result from this. On the one hand, having a diagnostic reader and knowing what to look for can make it much simpler to diagnose a problem.
A malfunctioning sensor, on the other hand, can produce erroneous readings and leave you stuck on the side of the road.
The camshaft sensor, crankshaft sensor, mass air flow (MAF) sensor, manifold absolute pressure (MAP) sensor, and throttle position sensor are the most typical sensors that prevent your automobile from starting.
Each time the intake valve on cylinder number one opens, a signal is transmitted to the ECU by the camshaft position sensor. The Crankshaft Position Sensor (CKP) signal and that information are then used to determine when the intake valves on the remaining cylinders are opening. When an engine begins, a defective camshaft sensor won’t be able to precisely determine the position of the camshaft, which may result in a misfire or possibly prevent the engine from starting at all.
P0340 and P0335 error codes are frequently set off by issues with the camshaft and crankshaft sensors, respectively.
as already mentioned. The air entering the intake manifold is being watched by the mass air flow sensor. By continuously measuring the air pressure, the manifold absolute pressure (MAP) sensor keeps an eye on the air in the intake manifold. The fuel delivery rate is set by the ECU using the readings from the MAP and MAF sensors. The engine will run rich if either one or both of these measurements are abnormal. The engine will typically stall or misfire as a result of this. Additionally, while the engine is attempting to start, it may flood.
The check engine light will frequently illuminate and the error number P0106 will be stored in the ECU if the MAP sensor fails.