A dead battery, an alternator issue, or a bad starter are the three most frequent causes of a Hyundai Elantra not starting.
In This Article...
clicking noises when attempting to start your Elantra quickly
When you turn the key in the ignition, do you hear a fast clicking sound? Then, you can have a serious issue with excessive resistance or low voltage. The battery is the cause of this rapid clicking. Your battery may also be the issue for at least two reasons:
- Your vehicle’s battery can be on its last legs as a result of low battery charge, a malfunctioning alternator, or completely dead battery. To check the output voltage, use a voltmeter. A battery is unquestionably close to being destroyed if the reading is less than 12 V. Fortunately, a dead battery does indicate that it is either damaged or dead. You may be able to replenish your electrolytes, which will assist address the problem, if the battery is not delivering enough power due to low electrolyte levels.
- Your battery may become unresponsive if your alternator is malfunctioning. A broken alternator is another auto part that can make a battery unresponsive. When your car won’t start, you’ll hear that awful clicking sound because your alternator can’t supply the required voltage. This signifies that you must fix or replace the alternator as soon as possible. However, if your automobile won’t start despite having a healthy, functional battery, you’ll have to live with the risk of a parasitic drain.
- Fast clicks from your automobile could indicate corroded battery terminals. Fast clicks from your car could also indicate corroded battery terminals. Examine your battery carefully. Are there any deposits or “build up” surrounding the terminals, such as white, yellow, or another color? The corrosion surrounding your battery terminals is what you are then directly observing. Simply grab some water and a sturdy steel brush to help the corrosion release and be removed. Remember that sloppy or loose battery cable connections or ends might also lead to problems. Before you start your car, take the time to check those terminals.
- The quick clicking sounds coming from your car could be caused by a malfunctioning starter. Problems with your starter are beyond bothersome. Check to see if you have a dead starter motor if a faulty or damaged component is what’s causing the problems. Also possible is a loose starting connection. If this is the case, you must take the time to identify the problematic wire and test it with a voltmeter. A qualified auto technician is required to fix the motor. However, if that describes you and you have prior expertise with this remedy, make sure you have the necessary time and patience for the repair.
In the morning, the engine rotates but won’t start.
The cold morning can’t get my car to start. Engine spins but doesn’t ignite. I reasoned that the issue might have to do with the oil pressure sensor connector since when I spray WD40 on all of the connectors for the air flow, oil pressure, and other components, the issue starts, but it returns after a short while.
Must maintain the oil at a specific temperature; otherwise, the oil won’t reach the block. Spraying WD40 heats up those connections to allow for easy movement. My recommendation is to use a Benson burner or perhaps thicker oil during the winter months to prevent freezing. oil change for the season, haha. Additionally, this lessens the risk of the oil and sludge burning.
Hyundai’s Push-Button Start Issue Is Still Present
Is your Hyundai’s push-button start malfunctioning? Have you been left stranded by your Hyundai’s keyless start issues because it won’t start?
We routinely write about the problems Hyundai drivers face, including vehicle alignment problems and transmission problems.
A new issue with the Hyundai push button start is already approaching.
People who are been left stranded by the Hyundai push button start issue are flooding the message boards in droves.
The problem is caused by the brake pedal sensor failing. A driver should ideally depress the button while keeping their foot on the brake. The Hyundai should start without a hitch as long as it detects a key fob nearby (in a pocket or handbag). However, it appears that the brake pedal’s sensor is broken. Due to the car’s inability to recognize that the driver has their foot on the accelerator, it won’t start.
Many of the drivers we are aware of are returning to their Hyundai dealer on a frequent basis to address this issue, and some people have been informed there is no cure because it is intermittent. Some people have been told that the issue would resolve itself. This is not true.
We think that because the manufacturer has not yet found a suitable solution, many more Hyundai drivers may experience the push-button start issue in the future. Numerous drivers can end up stranded in driveways, parking lots, and petrol stations as a result of this problem.
It’s crucial to maintain track of your repair bills if you’re experiencing Hyundai push-button start issues and to continue receiving warranty service until the problem is fixed. If you discover that you have visited the shop numerous times to address the issue, research your rights under state lemon laws (including those in New York and New Jersey) and federal warranty regulations, and then get in touch with a lemon law attorney in your state who might be able to help.
Rickthestick25
Hello, I’m aware that this article is old, but my 2018 Elantra GT has begun experiencing the same problem. According to the study I’ve done, a bad brake sensor is to blame. Although it is bothersome, you may disable the braking sensor by pressing the start button once, then holding it for another 30 seconds. Ensure that the door on the driver’s side is shut. I was really almost 1500 miles from home the first time I got lost!
I can’t get my Hyundai Elantra to start.
Press and hold the remote start button for four seconds after pushing the lock button. The button must be depressed for at least two seconds. A
After itas successfully receives the command, the car should start and the parking lights should flash.
The Hyundai will run for 15 minutes before turning off automatically. If you intend to use your remote start feature, you might want to make sure the temperature is set where you want it beforehand because the climate control will operate at whatever setting it was on previously. A A
How much does a Hyundai Elantra starter cost?
Estimated cost to replace the starter on a Hyundai Elantra. Replacement starters for Hyundai Elantras typically cost between $427 and $498. While parts are priced between $346 and $396, labor costs are expected to be between $80 and $102
My car won’t start, but the battery is fine. Why?
Your starter may be the issue if the battery appears to be in good condition. A starter is a little motor that uses battery power to pull current in order to start an engine. When you turn the key in the ignition, you can hear a clicking sound if the starter fails or malfunctions. In some cases, loose connections are the issue, while in others, a new starter may be required. There is no assurance that jumping a car will fix starter issues.
Why won’t my car start despite a good battery?
If your car’s battery is in good condition but it still won’t start, there may be a problem with the fuel or ignition systems. Insufficient gasoline, a bad starter, a bad ignition switch, a blocked fuel filter, a poor fuel pump, a worn timing belt, or a weak ignition coil are a few more typical causes.
Be sure to try one of the straightforward solutions described above to get your car started and on the road to the mechanic, even though a jumpstart is not a cure for any of these problems and some of them are probably going to require an expensive repair!
A Hyundai Elantra battery cost?
A Hyundai Elantra battery replacement typically costs between $299 and $306. While parts are priced at $272, labor costs are predicted to be between $27 and $34.
How come my car only clicks when I try to start it?
When you turn the key in the ignition, does your car make a succession of quick clicks similar to this?
The good news is that this issue might be easily resolved. A loud, quick clicking sound is typically a sign that your starter motor isn’t receiving enough electrical current to engage; in other words, your solenoid is trying to connect but failing. A deteriorating battery, a faulty connection at the battery, or even a defective alternator that isn’t adequately charging your battery could all be to blame for this lack of electrical current. In the best case situation, you should clean your battery or posts.
When your car won’t start but the battery is still functional, what does it mean?
The car may not start even when it clicks when attempting to start due to a weak battery, filthy battery terminals, a damaged starter motor, or a blocked solenoid. There are a few techniques to try before using the jumper cables or electric jump starter even if it could just need a jump start.
Is the 2014 Hyundai Elantra engine under recall?
- The National Highway Traffic Safety Administration (NHTSA) has received 225 complaints about the 2014 Hyundai Elantra, of which 88 are about engine problems that could pose a fire risk.
- Although there hasn’t been a recall for the Elantra’s engine issues, a class-action lawsuit that was brought and resolved provides some owners with relief.
- For the 2014 Elantra, there has only been one recall due to a brake pedal stopper that is failing and may allow the gear shifter to shift without the brake being applied.
- The Elantra’s electronic throttle control system, which includes the 2014 model year and can result in unforeseen acceleration and surging, is still under investigation.
- After engines, the Elantra’s steering is another area where complaints are common. The steering wheel locking in the center is the most worrisome of them.
Are the Hyundai Elantra engines subject to a recall?
With the 2.0L Nu MPI engine, Hyundai Motor America (Hyundai) is recalling 158,493 2019–2021 Elantra vehicles. The 2.0L Nu MPI-powered 2019–2021 Veloster and Kona models are also included in the recall. You can input your vehicle’s VIN on the NHTSA website to find out if it is affected.
A similar recall from Hyundai was previously issued for almost 150,000 2021 Seltos cars using the same engine. Kia Souls from 2020 and 2021 were also recalled.
What might prevent a starter from turning over?
A defective starter motor, a poor battery-to-starter motor connection, or a blown fuse (if present) in the circuit between the starter and the battery are the typical causes of this issue.
What could prevent an automobile from starting?
A dead or malfunctioning battery is the most typical cause of car starting problems.
1 Despite the fact that most cars are fuel-powered, all vehicles need electricity to function. Your engine’s starter needs an electrical signal to fire in order to crank it. 2 Your car’s engine won’t start if your battery has a problem. Although there are other signs that could point to a dead battery, it is always a good idea to see if your engine even turns over.
Dead batteries have the advantage that you can restart your car without the help of a mechanic. Anyone with a basic understanding of mechanics can jump start a car battery. The best course of action is to simply take good care of your battery because battery jumps are only short-term fixes and new batteries can be pricey. Check out these suggestions for preventing a dead battery for more information on how to achieve that.