Under the steering wheel is typically where you’ll find the TPMS reset button.
In This Article...
How can I reset the tire pressure sensor on a 2015 Hyundai Sonata?
Turn the ignition key to the “on” position and press the tpms button, which is often found beneath the dash, until the tpms light blinks multiple times to reset the tire pressure monitor or tpms system in your 2015 Hyundai Sonata vehicle. Your vehicle’s tpms system should be reset after starting it and letting it run for at least 20 minutes.
My 2015 Sonata Limited is mine. The button is absent. The lights went out after I inflated my tires with my tire inflator to 35 psi. To see your car’s tire pressure, you might need to travel a short distance.
Tire Pressure Sensor Reset
Identify the TPMS system type.
If the direct system is used by your 2015 Hyundai Sonata, resetting the tire pressure sensors might only require pressing a reset button on the dash or navigating a menu as described in your owner’s manual. If your 2015 Hyundai Sonata has an indirect system, it must be reset by a dealer or one you have personally purchased using a magnet or scanning tool. In order to reset some systems, the ignition must be turned on while the reset button is pressed and held down for three seconds within the glove box.
Pump up the tires.
Ensure that all tires are inflated appropriately. All tires must be fully inflated because you are resetting the sensors to “zero,” or else the sensors won’t be properly calibrated and their readings will be off.
Evaluate the battery.
If the sensor in your 2015 Hyundai Sonata is powered by a battery, make sure the battery is not dead. The battery should be changed every five years. Since the battery is integrated, in certain cases this necessitates replacing the complete sensor unit.
Make the transponders new.
Every wheel has a unique transponder. Each responder’s location changes when the wheels are rotated, and the TPMS needs to learn their new locations. Although this relearning process varies depending on the vehicle, you can get more information in the TPMS chart in your manual or online. If the valve stems double as tire pressure sensors, it is a good idea to swap them out when purchasing new tires.
Apply the magnet technique.
Press the lock and unlock buttons on the key fob when the key is in the ignition but the engine is not running. Placing a magnet over each valve stem after the initial chirp will cause the horn to chip for each valve in the following order: left front, right front, right rear, and left rear. Make that the driver information center is showing the pressure values.
Utilize the scan tool approach.
The owner’s manual’s TPMS Reprogramming Procedure menu prompts can be followed if no sensors are being replaced.
How to re-set the tire pressure on a Hyundai Sonata
Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the engine and give the sensor 20 minutes to refresh. Under the steering wheel is typically where you’ll find the TPMS reset button. Consult your owner’s handbook if you are unable to locate it.
How to reset the tire pressure light on a Hyundai Sonata 2020 is another common query. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button. Consult the owner’s manual for your car if you can’t find it.
How to reset the tire pressure light on a Hyundai is another common question. Release the TPMS reset button after holding it down while waiting for the light to blink three times. To reset the sensor, start the engine and let it run for 20 minutes. The reset button for the tire pressure monitor is often located underneath the steering wheel.
A 2018 Hyundai Sonata’s tire pressure light needs to be reset, too. Hold down the tpms reset button on the 2018 Hyundai Sonata until the tire pressure light blinks, then start the car and wait for around 20 minutes.
Furthermore, where is the 2017 Hyundai Sonata’s TPMS reset button? Make sure the tire pressure is right before starting the 2017 Hyundai Sonata to reset the TPMs. After 10 minutes, press the reset button, which is located to the right of the steering wheel. You might need to keep pressing the button until the light flashes in some circumstances. A button with the label “tpms” or something similar is located to the right of the steering wheel. When it starts to blink, hit it and keep it down. Once it blinks, let the car sit for roughly 20 minutes so that it can readjust.
Where is the Hyundai Sonata’s button to reset tire pressure?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. When the tire pressure monitor system light blinks three times, hold down the reset button.
How is the TPMS manually reset?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. For the sensors to reset, start the car and let it run for 20 minutes. The button to reset the tire pressure monitor is under the steering wheel.
What does the Hyundai Sonata’s TPMS light mean?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, lower fuel economy, excessive heat buildup, and tire overload. The shoulders or tread edges of a tire that is underinflated will prematurely wear out on both sides.
Finding the TPMS indicator on your dashboard is straightforward if this is your first time hearing about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
The TPMS light button is where?
Under the steering wheel is typically where you’ll find the TPMS reset button. Consult the owner’s manual for your car if you can’t find it. All tires should be inflated to 3 PSI more than what is suggested, then completely deflated. Include the spare tire as well, as it can feature a sensor.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
Will removing the battery reset the TPMS?
Each vehicle has an onboard computer, which occasionally experiences technical difficulties. Resetting the computer is the best approach to address these issues, and you may do this by removing and reinserting the battery. Locate the negative terminal of the battery by opening the hood of your car. Press the car’s horn to drain any leftover power after removing the negative connector to disconnect the battery. Once the positive terminal is connected again, the TPMS warning light should stop flashing.
Can you turn the TPMS off?
Yes, it is possible to disable your tire pressure monitoring device using a smart, non-intrusive approach. You only need to use an emulator created to get around the TPMS. The TPMS bypass emulator is a tiny box-shaped gadget containing technology that allows you to “switch off” your tire pressure monitoring system.
How do I turn off the TPMS light?
Don’t start the car; just turn the key to “on.” Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. The light ought to turn off in 20 minutes.
My TPMS won’t retrain, why?
After correctly completing all steps, if the TPMS system does not reset, there may be a problem with interference between the sensor and the vehicle’s ECU, especially for larger trucks like the F-Series. Steps 6 and 8 should result in the sound chirping; otherwise, the relearn operation was unsuccessful.
I have a TPMS light on. Can I drive?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
Is there a fuse in the TPMS?
The TPMS FUSE NUMBER of the wheel sensors? The fuse for the tire pressure warning system is in the fuse box under the dash, to the left of the steering wheel.
Why, after filling the tires, does my tire pressure light remain on in a Hyundai?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
What is the price of a new TPMS sensor?
Depending on the type of car, the cost to replace the TPMS sensors might be anywhere from $50 and $100 per.
Because servicing TPMS needs additional parts, tools, and labor, TPMS-equipped tires are slightly more expensive to maintain than non-equipped tires. Every time a tire is removed from the vehicle for maintenance or replacement, the TPMS valve service kit, which consists of the valve core, (sealing) cap, nut, and grommet (stem seal), needs to be replaced. On most automobiles, the service kit is between $5 and $10 per wheel. The TPMS system needs to be checked and reset, which takes additional time and a special TPMS programming tool.
A service pack should be used to replace the sealing components of the sensor, which comprise the cap, valve core, grommet, nut, and any other accessory included in the service pack, according to Schrader(r), a producer of original equipment TPMS sensors. The integrity of the TPMS sensor and valve is guaranteed by replacing the service pack components.
TPMS are in my automobile. I haven’t had my repair shop service it yet. What should I anticipate when I arrive?
- Checking the system’s sensors and TPMS for appropriate operation
- Any component of your TPMS sensors that is malfunctioning should be repaired or replaced.
- Your vehicle’s computer will need to “relearn” how to place the TPMS sensors by doing this.
- After the tire service is finished, make sure your TPMS system is functioning properly.
What happens if I have an additional set of wheels and tires (for snow tires or unique wheels)?
You can get a spare pair of tires or wheel assemblies fitted with a set of replacement sensors. Your TPMS installer will be able to relearn the new sensors to the vehicle computer after the extra set of tires or wheel assemblies are attached to the vehicle. The sensors will need to be relearned to the vehicle computer when the original set of tires or wheel assemblies are reinstalled on the vehicle.