The TPMS is typically located on the left side, behind the dashboard, in more recent models such the Hyundai Elantra 2019.
In This Article...
How can I turn off the low tire pressure light on my Hyundai Elantra?
Your Hyundai Elantra’s TPMS is there to alert you if one or more of the tires are under-inflated, which could lead to early tire wear, tire failure, and hazardous driving conditions. The TPMS can be reset in a matter of seconds. First, without starting the car, turn the ignition to the “ON” position. Once you see the tire pressure light blink three times, push and hold the “TPMS Reset” button (located beneath the steering wheel) for a moment. Start the car and give the sensors at least 20 minutes to re-calibrate. After finishing the process, the TPMS has been successfully reset.
Hold the reset button down until the TPMS indicator light in the instrument panel blinks slowly three times. This will reset the tire pressure sensor in the Hyundai Elantra.
Is there a cover over the reset button? My 2008 Hyundai Elantra has a reset button, but I can’t seem to find it.
How do I clear the TPMs on a 2019 Hyundai Elantra?
Find the reset button first, which is located underneath the dashboard on the left side of the car. Hold down the button while pushing it until the low tire pressure light flashes three times. Once it stops blinking, calibration mode will be activated in your car. If you’re having trouble finding the button, check your owner’s handbook. Take the automobile for a brief drive after the calibration process has started. After continuing to drive for roughly 15-20 minutes, the TPMS should be reset. Try increasing the tire pressure by three PSI if the light continues to stay on. To reset the TPMS, deflate your tires and then inflate them once again. Consult a mechanic or your car dealership to undertake a thorough diagnosis of your vehicle if that still doesn’t resolve the problem.
Hold the reset button down until the tpms indicator light in the instrument panel blinks gently 3 times to reset the 2019 Hyundai Elantra tire pressure sensor.
Yes, I followed Gabe’s advice. Light came on after exactly two miles of inflation reaching a pressure of 35! I’m grateful.
In a 2018 Hyundai Elantra, where is the TPMS button located?
The TPMS reset button’s location varies from car to car. In a Hyundai Elantra, the TPMS reset button is typically located underneath or to the side of the steering wheel. The reset button’s precise location can, however, differ between models.
The Hyundai TPMS button is where?
Start the engine and give the sensor 20 minutes to refresh. Under the steering wheel is typically where you’ll find the TPMS reset button. Consult your owner’s handbook if you are unable to locate it. Each tire should be inflated to 3 PSI more than is suggested before being totally deflated.
Is there a TPMS on the 2017 Hyundai Elantra?
All American-made automobiles must have direct or indirect TPMS systems fitted as of 2008 as a result of the TREAD Act’s 2007 mandate.
Hyundai produces the Elantra, Elantra GT, and Elantra Touring with a direct TPMS system. If one or more tires on a direct TPMS system indicate low tire pressure, the TPMS sensors will communicate this information to the vehicle’s ECU. Each tire pressure or an indicator light (low-line TPMS system) will be displayed on the dashboard (high-line TPMS system).
What exactly does TPMS on my Hyundai Elantra mean?
System for Monitoring Tire Pressure (TPMS) – page 32 Let the customer know how the TPMS works. – One or more tires are under-inflated when lighted. – When there is a problem with the TPMS, it blinks for about a minute before staying lit.
Where is the Hyundai TPMS reset button?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
What does the 2010 Hyundai Elantra’s TPMS light mean?
Mitchell 1 contributes TPMS knowledge to Modern Tire Dealer, a highly regarded journal that produces editorial content targeted at independent tire dealers. This story is being shared on our blog along with a link to the Modern Tire Dealer website, where you may read it in its entirety. The TPMS information in this page can also be found in our ProDemand(r) auto repair information software’s reset procedures tab, along with other crucial reset procedure information for the chosen car.
NEED FOR SPECIAL TOOLS? Yes, a TPMS module on a Hyundai GDS (Global Diagnostic System).
The 2011–2017 Hyundai Elantra, 2014 Elantra Coupe, and 2009–2012 Elantra Touring all have tire pressure monitoring systems (TPMS) that use wheel-mounted tire pressure sensors to keep track of the air pressure in the four road tires. The system accomplishes this by using a receiver, four radio frequency (RF) tire pressure sensors, two warning lights on the instrument panel, and a data circuit.
The low pressure warning light on the instrument cluster will turn on if tire pressure falls below the permitted threshold or if a quick leak is discovered. The TPMS warning indication will be illuminated if the system discovers a fault with the receiver or sensor, or if it discovers a defect that is external to the receiver or sensor. The light will remain on during the whole ignition cycle if the issue is deemed “important.”
There are two operating modes for the tire pressure sensor: stationary/rolling mode and sleep mode. The sensor will record temperature and pressure every four seconds while measuring acceleration every 60 seconds in the stationary/rolling mode. To save battery life, the sensor enters a low current consumption state during sleep mode and stops taking measurements. When new, all sensors are in this condition. The sensor won’t communicate unless the commence command asks it to or the speed of the car reaches 20 mph (32 km/h).
All tires must have their air pressure checked and changed to the specified cold pressure mentioned on the vehicle certification label (located on the driver’s door or door pillar) when the low tire pressure warning light illuminates. Repair the tire as necessary if it has been damaged. Make sure the alarm light is turned off (this may take up to four minutes if the tire is not rapidly re-inflated). Check the tire pressure again if the warning light remains on. Turn the wheel a quarter turn and wait another four minutes if the tire pressure is satisfactory (the sensor may be in an RF null). There is a TPMS issue if the Hyundai Elantra tire pressure light is still on or the TPMS warning indicator is lighted.
NOTE: It must be started if the tire pressure sensor is replaced. Rotation of the wheels and tires has no impact on the TPMS. Check the air pressure in each tire and make any necessary adjustments when the low tire pressure warning light illuminates.
What is a Hyundai’s TPMS system?
A Hyundai tire pressure monitoring system, often known as a Hyundai TPMS, is an electronic device that checks the tire pressure in a vehicle and immediately alerts the driver if the tire pressure is too low or too high.
The TPMS light button is where?
Under the steering wheel is typically where you’ll find the TPMS reset button. Consult the owner’s manual for your car if you can’t find it. All tires should be inflated to 3 PSI more than what is suggested, then completely deflated. Include the spare tire as well, as it can feature a sensor.
Can the TPMS system be turned off?
Yes, it is possible to disable your tire pressure monitoring device using a smart, non-intrusive approach. You only need to use an emulator created to get around the TPMS. The TPMS bypass emulator is a tiny box-shaped gadget containing technology that allows you to “switch off” your tire pressure monitoring system.
How can I activate the TPMS light?
Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. Within twenty minutes, the light ought to turn off. While the car is off, cut the positive battery cable.
Why does the TPMS light not go out?
How to Reset the Tire Pressure Light Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light should not be on because the tire sensors should have been reset.
I have a TPMS light on. Can I drive?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
When pressure is high, will the TPMS activate?
Examine the tire pressure in each of your four tires as soon as the TPMS Light illuminates. If a tire is under-inflated, fill it up with air until it meets the manufacturer’s recommendations, which may be located on the inside of the driver-side door panel. Additionally, if the tire pressure is too high, the TPMS Light can illuminate. Check the pressure in each of the four tires if this is the case, then deflate as necessary.
Any of the following three possibilities for the TPMS light to turn on are:
When the TPMS light illuminates while you are moving, at least one of your tires likely has an inaccurate air pressure. Check the tire pressure and locate the closest gas station. Underinflated tires can wear out prematurely, limit fuel efficiency, and pose safety risks if driven on over an extended period of time.
TPMS flashes on and off: Changing temperatures may be a blame for the TPMS Light occasionally flashing on and off. The light may go out after the car warms up or when the temperature rises during the day if the pressure dips at night and rises during the day. The weather is causing the pressure in the tires to fluctuate if the light turns back on as the temperature drops. It is a good idea to gauge the tires and add or remove air as necessary.
TPMS light flashes for a minute or so after you turn on your car, then stays on: If the TPMS Light flashes for a minute or so after you turn on your car, then stays on, the system is not working properly. Your car has to be inspected as quickly as possible by a professional. If you must drive, exercise caution because the TPMS system will no longer warn you if your tires are underinflated. If you have to drive before a professional can examine your automobile, check the pressure in each tire with a gauge and add more if necessary.
Is TPMS on the tire or rim?
When the air pressure within the tire lowers, your car’s tire pressure monitoring system (TPMS) will sound an alarm and notify the driver. This is an electronic system that links the monitor on the dashboard of the car with the sensor that is mounted on the rim to display whether the tires are adequately inflated or not.
The TPMS will alert the driver with a flat tire warning light if the tire starts to lose air pressure. This indicates that the tire’s proper inflation level is not being maintained for whatever reason; whether as a result of tire or valve damage, the tire will need to be reinflated and repaired.
These sensors make sure the tires don’t deflate to dangerously low levels, which, if one is not careful, could further harm the tire, the rim, and even the TMPS unit. Due to this, they have been a necessary component of automobile production in the US since 2008.
The service life of tires will be shortened by rapid tread wear caused by improper tire inflation. Lower inflation extends their footprint, endangering their ability to drive safely and increasing pressure buildup while they perform, which will destroy their ability to use gasoline efficiently. The tires’ wet weather performance will also suffer from the broader footprint, which will also lengthen the distance between stops. In other words, it will harm the car’s performance and safety when driving.