Under the steering wheel is typically where you’ll find the TPMS reset button.
In This Article...
How can I reset the 2017 Hyundai Elantra’s tire pressure light?
The 2017 Hyundai Elantra’s TPMS can be easily reset. Make sure the car is on level, flat ground first. Verify that the tire pressure is within the proper psi range for each tire. The psiAmount should be stamped on the tire’s side if you look there. You’ll want to get in the car after this is finished and switch on the power, but do not start the engine. A button with the label “tpms” or something similar is located to the right of the steering wheel. When it starts to blink, hit it and keep it down. Once it blinks, let the car sit for roughly 20 minutes so that it can readjust. You can switch off the car and then turn it back on when the light stops blinking to be sure the reset was successful.
Can someone kindly explain me how to reset the TPMS as we all know that the 2017 model does not have a TPMS button?
I just looked beneath the steering wheel of my girlfriend’s car, and there is no TPMS button. I did notice a yellow switch after removing the fuse box cover, but I refrained from touching it.
Press the tpms reset button on a 2017 Hyundai Elantra, hold it down until the light flashes three times, and then let go. Turn on the engine and give the sensor 20 minutes to run. Usually, the tire pressure control reset button is located under the steering wheel.
My 2017 Hyundai Elantra lacks a reset button, but the owner’s manual describes an optional tire pressure monitoring system; mine only has a general warning light. A reset button might be present on the pricier model but not on the more basic one like mine.
Is there a TPMS on the 2017 Hyundai Elantra?
All American-made automobiles must have direct or indirect TPMS systems fitted as of 2008 as a result of the TREAD Act’s 2007 mandate.
Hyundai produces the Elantra, Elantra GT, and Elantra Touring with a direct TPMS system. If one or more tires on a direct TPMS system indicate low tire pressure, the TPMS sensors will communicate this information to the vehicle’s ECU. Each tire pressure or an indicator light (low-line TPMS system) will be displayed on the dashboard (high-line TPMS system).
How can the TPMS on a Hyundai Elantra be reset?
You may reset the tire-pressure monitoring system in your Hyundai Elantra once you’ve found the TPMS.
The following steps will show you how to reset the TPMS on a Hyundai Elantra:
1. Turn the ignition to the “ON” position and insert the key.
2. Avoid starting the car.
3. Hold down the TPMS reset button while waiting for the tire pressure light to blink three times.
4. Let go of the TPMS button.
5. Start the vehicle.
6. Permit the sensor to reset for 20 minutes.
Your tire-pressure monitoring system will be reset by following these instructions. After putting air in your tires, it’s crucial to reset your TPMS since it keeps your knowledge of your tire pressure accurate. When your tires need to be inflated, the tire pressure monitoring system will let you know by turning on the tire pressure light.
Where is the Hyundai TPMS reset button?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
What is a Hyundai’s TPMS system?
A Hyundai tire pressure monitoring system, often known as a Hyundai TPMS, is an electronic device that checks the tire pressure in a vehicle and immediately alerts the driver if the tire pressure is too low or too high.
On a 2017 Hyundai Elantra, how do you turn off the low tire pressure indicator?
Set the key to the “On” position in the ignition with the car off, but don’t push the starter. Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the vehicle, then wait 20 minutes for the sensor to re-calibrate.
Does programming of Hyundai TPMS sensors are required?
Before being inserted in the tire, these sensors need to be programmed with the appropriate protocol/application information for the vehicle, and they then need to be retrained to the vehicle.
How is the TPMS reset?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is normally where you’ll find the reset button for the tire pressure monitor. If you can’t find it, consult the owner’s manual for your vehicle.
What does the Hyundai Elantra’s EPS light mean?
The majority of the dashboard lights are intended to serve as warnings of some sort, so seeing the EPS light turn on may cause you to get concerned. Your anxiousness can rise if you notice this light and a decline in steering ability. Driving your automobile becomes more challenging, and if you’re not used to manual steering, you can find this to be a very unpleasant experience.
When there is a problem with the power steering system, the EPS (electrical power steering) light will illuminate. But when the car is started, the light turns on briefly, just like other dashboard warning lamps. Only when a light is on for an extended amount of time does it signal a problem.
If the system is switched off, the lights can also turn on. Therefore, if you see the EPS light on, make sure the system is off. If it is, there is a button in the center console that you can use to quickly switch it back on.
My TPMS light is on, why?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, lower fuel economy, excessive heat buildup, and tire overload. The shoulders or tread edges of a tire that is underinflated will prematurely wear out on both sides.
Finding the TPMS indicator on your dashboard is straightforward if this is your first time hearing about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
Is TPMS on the tire or rim?
When the air pressure within the tire lowers, your car’s tire pressure monitoring system (TPMS) will sound an alarm and notify the driver. This is an electronic system that links the monitor on the dashboard of the car with the sensor that is mounted on the rim to display whether the tires are adequately inflated or not.
The TPMS will alert the driver with a flat tire warning light if the tire starts to lose air pressure. This indicates that the tire’s proper inflation level is not being maintained for whatever reason; whether as a result of tire or valve damage, the tire will need to be reinflated and repaired.
These sensors make sure the tires don’t deflate to dangerously low levels, which, if one is not careful, could further harm the tire, the rim, and even the TMPS unit. Due to this, they have been a necessary component of automobile production in the US since 2008.
The service life of tires will be shortened by rapid tread wear caused by improper tire inflation. Lower inflation extends their footprint, endangering their ability to drive safely and increasing pressure buildup while they perform, which will destroy their ability to use gasoline efficiently. The tires’ wet weather performance will also suffer from the broader footprint, which will also lengthen the distance between stops. In other words, it will harm the car’s performance and safety when driving.
What distinguishes TPMS from low tire pressure?
How do the TPMS light and the tire pressure light differ from one another? They both mean the same thing, right? Actually, not quite.
The low-pressure tire indicator might be compared to a low fuel indicator for your tires. If this indicator flashes, you must immediately fill your tires. The TPMS light, on the other hand, displays the pressure in each tire and could not alert you to an issue that demands your urgent attention.
Driving safely or maybe getting into a dangerous accident depends on knowing the difference between these two markers. To help you understand what the TPMS light and tire pressure light on cars imply when they start blinking, we’re going to look at some of those differences and share with you our own personal experiences with them.
Our professionals have years of experience fixing a variety of auto issues. This includes tire problems and guiding perplexed drivers toward understanding the significance of these and other dashboard signs.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
What occurs if the TPMS battery runs out?
The Tire Pressure Monitoring System, which notifies you when a tire is dangerously low on air, typically uses TPMS sensors embedded in the tires to detect low tire pressure. The majority of TPMS sensors use internal batteries that cannot be changed to power them.
The lithium ion batteries in a TPMS sensor have a lifespan of 5 to 10 years. The duration of the TPMS sensor batteries is difficult to predict because it depends on how many radio frequency broadcasts the sensors send out. The amount of driving you perform over time and the conditions you drive in will affect the sensor battery life. The TPMS battery life is less affected by cold conditions than by warmer ones. When compared to continuous pace, stop-and-go traffic has a greater effect on TPMS battery life. This is due to the fact that sensors send out more radio frequency broadcasts as a vehicle changes its speed.
The system will issue a malfunction warning when a TPMS sensor’s battery runs out, which will be visible as a blinking TPMS light on your dashboard. After 60 to 90 seconds, the light may either continue to flash or turn solid. Be a repair appointment as soon as you can if you receive this warning, but also check the tire pressure in each tire right away to make sure you have safe inflation all around.
You can change each individual TPMS sensor separately if one of them malfunctions and needs to be replaced. The other sensors, on the other hand, are probably on the verge of failing as well if the failure was brought on by a dead sensor battery. You might wish to proactively replace all the sensors so you have brand-new sensor batteries all around when you take into account the time and hassle of taking your car off for a sensor replacement.