The 2017 Hyundai Elantra’s starter is situated by the top of the engine, below the intake manifold. A little motor called the starter is used to start the car’s main engine. As a result, the engine is started and combustion is maintained. The car won’t start if the starter is damaged, however you might hear a clicking sound when you turn the key. You may anticipate spending between $300 and $500 on a new starter for your automobile, with parts costing about $300 and labor costing $200. It will take around an hour and a half if you have to remove it yourself. You’ll also need a wrench to do this.
Inside the steering column of the 2017 Hyundai Elantra, the starter is connected to the ignition, which is where you insert the keys.
In This Article...
SERPRESULT
0 * Planetary Gear Reduction (PLGR) Family * Mounting Bolt Hole * Starter Rotation: Clockwise
We currently have 8 starter kits available for your 2017 Hyundai Elantra, with prices starting at only $138.
What is the price of a starter replacement for a 2017 Hyundai Elantra?
The normal price range for a starter replacement is $440 to $551. Between $112 and $141 can be spent on labor, while between $307 and $410 can be spent on parts.
A Hyundai auto starter costs how much?
What is the Price of a Car Starter? Depending on the make, model, and whether you get a rebuilt or new starter, you should budget between $80 and $350 for a new auto starter. Of course, hiring someone to install it for you will cost more money.
A Hyundai Sonata starter costs how much?
Hyundai Sonata starter replacement typically costs between $397 and $517. The cost of labor is expected to be between $86 and $109, while the cost of parts is between $311 and $409.
How much does a Hyundai starter replacement cost?
The normal price range for a starter replacement is $440 to $551. Between $112 and $141 can be spent on labor, while between $307 and $410 can be spent on parts. Of course, taxes and fees are not included in this. The costs may also change based on the type, model, and need for any associated repairs of your car.
Where can I find a starter?
The starter is situated beneath the left mound of cylinders on the driver’s side of a car, between the transmission and the engine. It is kept in place by a few bolts and fastened to the mounting plates. Two cables are also connected to it.
Your car’s engine needs a starter to start and run smoothly. It is a relatively tiny device that is powered by the car’s battery. The car won’t start if a starter is defective.
A starter motor is a dependable component, so replacing one is not something you do frequently. Unlike other components, it might only need to be replaced once during the course of the vehicle’s lifetime.
How can you know if your starter or alternator is the problem?
- The Symptom: Lights that flicker and dim. The Alternator Is Probably at Fault.
- Dash lights come on as the symptom, but the car won’t start. The Most Likely Offender: Starter.
- The Symptom: The Jump Start Is Ineffective
When the starter fails, how do you start a car?
The starter solenoid connects the starter to the transmission in your car. If you hear the starting turning freely when you turn the ignition on, there might be a solenoid issue.
Check for dirt or rust on the solenoid wire to diagnose a faulty starter solenoid. You can work around the damaged starter solenoid wire if rusting is the problem.
To do this, connect the starter and solenoid using a 12V cable that runs straight from the car’s battery. When the connection is made, you’ll hear a click sound. Now switch on your ignition.
As soon as the engine cranks, you should unplug the 12V wire. If not, the flywheel, which is moving at a much faster speed, will continue to rotate with the starter gear (pinion) engaged, which could cause damage.
How can you identify if the problem is with your starter or battery?
Let’s start with diagnosing this problem since it is the cheapest and simplest to replace. Does the car make a clicking noise when you try to start it, but it won’t turn over? That might be encouraging. A dead battery is most likely to blame if a jump starts the car, but it won’t start again after being turned off.
How do you tell whether a car starter needs to be replaced?
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- Seven: Battery
Can I change a starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cable—the substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
I don’t want to remove my starter, but how can I test it?
The engine must be spun or cranked by the starter. If it does, the wires, connectors, or relay are the cause of the issue. If not, start the engine and use the black/negative jumper cable to establish a connection between the drivetrain and the battery’s negative terminal as a ground. Connect the red cable to the positive starter terminal.
Has Hyundai installed an immobilizer?
Electronic immobilizers that stop criminals from just breaking in and bypassing the ignition are absent from a large number of 2015–19 Hyundai and Kia automobiles. The component comes as standard on almost all automobiles from that era built by other manufacturers.
When the starter motor fails, can you jump start a car?
Recently, my starter has been extremely erratic, so I’m wondering if a jump start would help fix the problem. Can I jump start my car if the starter is bad?
In less than two minutes, find out if your auto insurance is being overcharged.
Although a car with a defective starter can be jump started, the underlying problem will not be resolved. Your car’s battery, not the starter, is what a jump start is for.
While a jump start can help the starter acquire the extra power it needs to start your engine because the starter is powered by the battery through a relay, it is not certain that a jump start will be helpful if the problem is with the starter.
To get the problem correctly identified and resolved, you are best off visiting a mechanic. Jumping your car every morning is not a workable approach, regardless of the circumstance!
A reliable strategy to make sure you’re taking good care of your set of wheels is to take it to the mechanic, along with giving it a robust vehicle insurance coverage.
In less than a minute, Jerry will produce comparable quotes from leading providers if you’re looking for auto insurance.
How can I reset the immobilizer on my Hyundai?
The keys to Hyundai vehicles have a microchip that occasionally loses synchronization (the key warning light will blink).
If you have one, a spare key.
2. If that doesn’t work, try unplugging the battery’s ground lead for five minutes. This should reset the immobilizer module.
3. To disable the immobilizer, you can enter the limp home password on the metal tag that comes with the keys by using the ignition key. See manual illustration.
Will starter tapping work?
How to Fix Your Starter Temporarily If you turn the key and nothing happens when you try to start the engine, you may be able to restart it by tapping softly on the starter’s rear side with a standard hammer while someone else holds the key in the “start” position.
What noise does a dead starter make?
It sounds strange. When you turn the key or press the start button, there may be a clicking sound, which is one of the signs of a defective starter. However, a starting might fail silently or it can make a whirling, grinding sound to warn you that it is about to fail, so pay attention.
Why won’t my Hyundai key fob operate?
A CR2032 battery powers the majority of Hyundai key fobs. Check to see if the battery is in contact with each connection. When your Hyundai key fob is put back together, replace any metal keys you may have removed.