The Hyundai Elantra’s starter is situated beneath the engine. When you switch on the ignition, this tiny yet mighty motor starts the engine. Your Elantra wouldn’t start without it. The motor’s internal brushes deteriorate and quit functioning over time. When this occurs, the engine won’t start when you turn the key. The broken starter must be changed out for a new one in order to solve the problem and get your Elantra back on the road.
In This Article...
SERPRESULT
Shop online and pick up free at your neighborhood O’Reilly Auto Parts to find the best Starter for your 2011 Hyundai Elantra.
99 11 teeth, a clockwise rotation of the starter, 12 voltage, and 12 teeth.
Where is the starter located on a 2010 Hyundai Elantra?
It is situated next to the engine block, behind the battery. It was a little challenging to locate because I had a 2007 (they are all the same from 2007 to 2010). I can take a picture and grab the owner’s manual.
On a 2011 Hyundai, where is the starter located?
at the bottom, in the front center of the vehicle. If you don’t have a car lift specifically, you must remove the radiator to remove it. To prevent electrical injuries, don’t forget to detach the battery before working on it.
A Hyundai Elantra starter costs how much?
Estimated cost to replace the starter on a Hyundai Elantra. Replacement starters for Hyundai Elantras typically cost between $427 and $498. While parts are priced between $346 and $396, labor costs are expected to be between $80 and $102
Where is the Hyundai Elantra’s smart key holder located?
This information caught my attention. I think it would also benefit our Palisades!
Fix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button.
Slots for Smart Keys: There are three places where these slots can be found: 1. on the front of the center console; 2. behind a panel right below the infotainment control knob; or 3. on the left side of the glovebox when it is open.
Why is the engine light on and my Hyundai Elantra shaking?
Tire problems: When a car shakes while driving, tire problems are usually at blame. When tires are worn out or out of balance, they start to behave differently. Common fixes include tire replacement, realignment, and balance.
Engine firing issues: Your automobile may vibrate if one or more of your spark plugs aren’t firing properly. Your check engine light will typically turn on as a result of this issue. If a misfire is at blame, there will typically be a lack of power or “hesitation” along with the vibration.
Brake system problems: It’s probably time to get your brake pads and rotors checked if the vibration or steering-wheel shaking only happens when you use the brakes. The metal in rotors has a tendency to deform as a result of heat, moisture, and stress. A warped rotor can happen at any time, but it may also be a sign that your brake pads need to be changed.
Problems with the engine mount: The motor mount, which links the engine to the chassis of your car, is intended to keep noise and vibration from the engine in the passenger area. The vibration may become more noticeable at idle while in gear as mounts deteriorate over time, and it may change when the car is in neutral or park. Broken motor mounts need to be repaired right away since they might cause more serious issues with the driveline.
Suspension problems: Your front suspension problems can also make your car tremble or shake. When this is the case, your automobile will behave normally when it is stopped but start to vibrate when you alter your speed or go over bumps. Strange noises like recurring clunks, squeals, and squeaks may also be present with suspension issues.
Where are the starters?
The starter is situated beneath the left mound of cylinders on the driver’s side of a car, between the transmission and the engine. It is kept in place by a few bolts and fastened to the mounting plates. Two cables are also connected to it.
Your car’s engine needs a starter to start and run smoothly. It is a relatively tiny device that is powered by the car’s battery. The car won’t start if a starter is defective.
A starter motor is a dependable component, so replacing one is not something you do frequently. Unlike other components, it might only need to be replaced once during the course of the vehicle’s lifetime.
Why is the shake in my Hyundai Elantra?
The typical price for an engine shaking, pulsing, or vibrating inspection for a Hyundai Elantra is $95; this includes $0 for parts and $95 for labor. Prices may change based on where you are.
Example: Inspection costs for a shaken, pulsing, or vibrating Hyundai Elantra engine
Concern should be expressed if there are any unexpected shaking or vibrating forces originating from the engine. It might be something as easy as worn or damaged engine mounts, something major like internal engine damage, or something simple like outdated spark plugs generating inconsistent power delivery.
How can you know if your starter or alternator is the problem?
- The Symptom: Lights that flicker and dim. The Alternator Is Probably at Fault.
- Dash lights come on as the symptom, but the car won’t start. The Most Likely Offender: Starter.
- The Symptom: The Jump Start Is Ineffective
When the starter fails, how do you start a car?
The starter solenoid connects the starter to the transmission in your car. If you hear the starting turning freely when you turn the ignition on, there might be a solenoid issue.
Check for dirt or rust on the solenoid wire to diagnose a faulty starter solenoid. You can work around the damaged starter solenoid wire if rusting is the problem.
To do this, connect the starter and solenoid using a 12V cable that runs straight from the car’s battery. When the connection is made, you’ll hear a click sound. Now switch on your ignition.
As soon as the engine cranks, you should unplug the 12V wire. If not, the flywheel, which is moving at a much faster speed, will continue to rotate with the starter gear (pinion) engaged, which could cause damage.
Can I change a starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cable—the substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
I don’t want to remove my starter, but how can I test it?
The engine must be spun or cranked by the starter. If it does, the wires, connectors, or relay are the cause of the issue. If not, start the engine and use the black/negative jumper cable to establish a connection between the drivetrain and the battery’s negative terminal as a ground. Connect the red cable to the positive starter terminal.
Can you jump start a car with a bad starter?
Recently, my starter has been extremely erratic, so I’m wondering if a jump start would help fix the problem. Can I jump start my car if the starter is bad?
In less than two minutes, find out if your auto insurance is being overcharged.
Although a car with a defective starter can be jump started, the underlying problem will not be resolved. Your car’s battery, not the starter, is what a jump start is for.
While a jump start can help the starter acquire the extra power it needs to start your engine because the starter is powered by the battery through a relay, it is not certain that a jump start will be helpful if the problem is with the starter.
To get the problem correctly identified and resolved, you are best off visiting a mechanic. Jumping your car every morning is not a workable approach, regardless of the circumstance!
A reliable strategy to make sure you’re taking good care of your set of wheels is to take it to the mechanic, along with giving it a robust vehicle insurance coverage.
In less than a minute, Jerry will produce comparable quotes from leading providers if you’re looking for auto insurance.
How long does a starting replacement take?
They just informed me that my starter needs to be replaced while I’m in the repair shop for some routine maintenance. How long does it take to replace a starter, please?
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If that’s the case, a 4 hour time frame would likely be preferable to a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance while you’re waiting for the mechanic to complete. We warrant that replacing your starter will be much quicker!
Simply take a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest offer, they all produce competitive estimates from leading insurance companies. When a customer shops with Jerry, they often save over $800!
Has Hyundai installed an immobilizer?
Electronic immobilizers that stop criminals from just breaking in and bypassing the ignition are absent from a large number of 2015–19 Hyundai and Kia automobiles. The component comes as standard on almost all automobiles from that era built by other manufacturers.
How much time does a starter have?
Once more, this figure is extremely variable. As a general rule, a brand-new starter with no flaws should last for roughly 80,000 starts. Since starters normally last longer in warmer regions, automotive problems are more likely to occur on the worst day of the year, when you need your car the most. However, considering that 80,000 is a sizable amount, you shouldn’t worry about it until it breaks because it could not ever require replacement. If you simply use your car to get to and from work every day, you would only need 480 starts in a year, not counting holidays.
How can I reset the immobilizer on my Hyundai?
The keys to Hyundai vehicles have a microchip that occasionally loses synchronization (the key warning light will blink).
If you have one, a spare key.
2. If that doesn’t work, try unplugging the battery’s ground lead for five minutes. This should reset the immobilizer module.
3. To disable the immobilizer, you can enter the limp home password on the metal tag that comes with the keys by using the ignition key. See manual illustration.