The starter for the 2013 Hyundai Sonata will be installed above the oil filter and below the air conditioning compressor on the cylinder’s driver side. You’ll need to crawl under the car where the transmission joins the engine block in order to reach and remove the starter, which is a bit of a struggle. In order to remove the bolts from the starter, you will want a 14mm socket. Make sure the battery cables are unplugged. Just below the turbo, behind the plastic air vent, are the nuts needed to unlock the heater hose. Depending on whether the replacement starter is an OEM or aftermarket piece, the price will vary from $65 to $120.
In the 2013 Hyundai Sonata, the starter is fixed in place between the engine and transmission.
In This Article...
A 2015 Hyundai Sonata’s starter can be found where?
Under the Hyundai, look for the starter. Between the transmission cross member and the transmission, it is located on the left side of the engine. The starter motor’s starter solenoid is fastened using bolts.
How much does a Hyundai Sonata starter replacement cost?
The normal price range for a starter replacement is $440 to $551. Between $112 and $141 can be spent on labor, while between $307 and $410 can be spent on parts.
Where can I find a starter?
The starter is situated beneath the left mound of cylinders on the driver’s side of a car, between the transmission and the engine. It is kept in place by a few bolts and fastened to the mounting plates. Two cables are also connected to it.
Your car’s engine needs a starter to start and run smoothly. It is a relatively tiny device that is powered by the car’s battery. The car won’t start if a starter is defective.
A starter motor is a dependable component, so replacing one is not something you do frequently. Unlike other components, it might only need to be replaced once during the course of the vehicle’s lifetime.
Is there a recall on my Hyundai Sonata?
Certain Santa Fe and Sonata models from the model years 2021–2022, which feature 2.5L turbocharged engines, are being recalled by Hyundai Motor America (Hyundai). The pipe connection between the high-pressure fuel pump and fuel rail may leak fuel.
Why did a Hyundai Sonata turn off while it was moving?
Transmission malfunction: The torque converter, which replaces the manual clutch in a car with an automatic transmission, is in charge of transferring power. The converter won’t function properly if the torque converter is damaged or if the transmission fluid level is low; as a result, the vehicle won’t be able to sustain power at low speeds, which results in the engine cutting out. This problem can also be brought on by a broken torque converter solenoid or TCS.
The fuel pump is in charge of moving fuel from the tank to the engine regardless of low fuel pressure, filthy or damaged fuel injectors, or a faulty fuel pump. Low fuel pressure from a damaged fuel pump can lead to an uneven stream of fuel being delivered to the engine. This doesn’t matter as much at high speeds, but at low speeds, even a little interruption in the fuel delivery might cause the engine to stall. A precise amount of fuel is sprayed out by the fuel injectors, and at the right moment, it is ignited by the spark plugs. Over time, injectors can get clogged or unclean, which causes irregular spray or no spray at all.
Bad oxygen sensor or mass flow sensor: The oxygen sensors and mass flow sensor let the vehicle adjust the air-to-fuel ratio by detecting how much oxygen is entering the fuel stream. Your vehicle won’t run as efficiently if the oxygen level is too high or too low. The car will continue to run at driving speeds, just like with low fuel pressure, but this insufficient power won’t be able to fuel the vehicle when it slows down.
Wires that are loose or rusted in the wiring harness: An ignition that fires inconsistently will cause an easily stalled engine. The vehicle can quickly lose voltage and won’t have the power it needs to remain running when you slow down if the wires are not in steady, dependable, and consistent contact with the ignition circuit.
Idle air control actuator malfunction: During idling, the engine’s RPMs are controlled by the idle air control actuator. The electronic control unit (ECU) sends information to this actuator, letting it know what RPM to keep the engine at for a secure and smooth idle. When the actuator is broken, the engine is not sent a signal for the idle speed and shuts off.
EGR valve obstruction or restriction: Depending on whether the EGR valve is jammed open or closed, a clogged, unclean, or damaged EGR valve might cause your automobile to stall, idle incorrectly, or sputter.
Are there any 2013 Hyundai Sonata recalls?
Model Year 2013 and 2014 Hyundai Sonata vehicles with 2.0 liter and 2.4 liter gasoline direct injection (GDI) engines produced at Hyundai Motor Manufacturing Alabama will have their engines inspected and, if necessary, replaced as part of a safety recall by Hyundai in the United States.
Are there any 2018 Hyundai Sonata recalls?
Certain 2017-2018 Sonata, 2016-2018 Sonata Hybrid, 2018-2020 Accent, and 2016-2017 Azera vehicles are being recalled by Hyundai Motor America (Hyundai). The trunk lock could break, making it impossible to access the trunk from the inside.
When the starter fails, how do you start a car?
The starter solenoid connects the starter to the transmission in your car. If you hear the starting turning freely when you turn the ignition on, there might be a solenoid issue.
Check for dirt or rust on the solenoid wire to diagnose a faulty starter solenoid. You can work around the damaged starter solenoid wire if rusting is the problem.
To do this, connect the starter and solenoid using a 12V cable that runs straight from the car’s battery. When the connection is made, you’ll hear a click sound. Now switch on your ignition.
As soon as the engine cranks, you should unplug the 12V wire. If not, the flywheel, which is moving at a much faster speed, will continue to rotate with the starter gear (pinion) engaged, which could cause damage.
How can you know if your starter or alternator is the problem?
- The Symptom: Lights that flicker and dim. The Alternator Is Probably at Fault.
- Dash lights come on as the symptom, but the car won’t start. The Most Likely Offender: Starter.
- The Symptom: The Jump Start Is Ineffective
Can I change a starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cable—the substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
I don’t want to remove my starter, but how can I test it?
The engine must be spun or cranked by the starter. If it does, the wires, connectors, or relay are the cause of the issue. If not, start the engine and use the black/negative jumper cable to establish a connection between the drivetrain and the battery’s negative terminal as a ground. Connect the red cable to the positive starter terminal.
How can you identify if the problem is with your starter or battery?
Let’s start with diagnosing this problem since it is the cheapest and simplest to replace. Does the car make a clicking noise when you try to start it, but it won’t turn over? That might be encouraging. A dead battery is most likely to blame if a jump starts the car, but it won’t start again after being turned off.
When the starter motor fails, can you jump start a car?
Recently, my starter has been extremely erratic, so I’m wondering if a jump start would help fix the problem. Can I jump start my car if the starter is bad?
In less than two minutes, find out if your auto insurance is being overcharged.
Although a car with a defective starter can be jump started, the underlying problem will not be resolved. Your car’s battery, not the starter, is what a jump start is for.
While a jump start can help the starter acquire the extra power it needs to start your engine because the starter is powered by the battery through a relay, it is not certain that a jump start will be helpful if the problem is with the starter.
To get the problem correctly identified and resolved, you are best off visiting a mechanic. Jumping your car every morning is not a workable approach, regardless of the circumstance!
A reliable strategy to make sure you’re taking good care of your set of wheels is to take it to the mechanic, along with giving it a robust vehicle insurance coverage.
In less than a minute, Jerry will produce comparable quotes from leading providers if you’re looking for auto insurance.
How can I tell if my starter is defective?
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- Seven: Battery
Does a defective starter deplete the battery?
Can a poor starter therefore drain your battery? Yes, it can, to put it succinctly. Additionally, constantly attempting to start your automobile with a broken starter could cause the battery to deplete much more quickly.
One of the main causes of battery overcharging is a bad starter. If you don’t routinely check on your car, these issues could soon get out of hand. Therefore, it would be best to become familiar with the signs of a bad starter and how to avoid them.
Will starter tapping work?
How to Fix Your Starter Temporarily If you turn the key and nothing happens when you try to start the engine, you may be able to restart it by tapping softly on the starter’s rear side with a standard hammer while someone else holds the key in the “start” position.
when all the lights are on but your car won’t start?
If your headlights work but your car won’t start, your battery is charged but the starter or ignition isn’t working properly. A starting engine can be jumped using a charged battery if the starter or ignition is the issue.