Extended Performance of Mobil 1 5 quarts of High Mileage 5W-20 Full Synthetic Motor Oil (Part No. 15020)
In This Article...
What is the oil type and capacity for the Hyundai Sonata?
For the 1.6 L 4-cylinder engine of the 2018 Hyundai Sonata, the recommended oil type and capacity are S5w-30 or 5w-20, and 4.8 quarts. The engine needs high-quality oil to function properly. At some point, you will experience oil issues. The engine can quit working if the oil is old or poor. The engine could make a knocking sound. Poor gas mileage is a possibility. An horrible burning smell is a prevalent issue. This needs to be carefully examined right away to prevent the car from exploding. One day, you’ll need to change your oil. A decent guideline is every 5,000 to 10,000 miles, approximately. If You don’t replace it, the engine will have issues.
The SAE 5W-30 or 5W-20 synthetic blend oil used in the 2018 Hyundai Sonata is used. The 1.6L 4-cylinder engine can handle 4.8 quarts of fuel and prefers 5W-30. The 2.0L 4-cylinder, which has a 4.3-quart capacity, likes 5W-20. The 2.4L 4 cylinder, which has a capacity of 5.1 quarts, can run on either 5W-30 or 20.
SERPRESULT
Full synthetic motor oil keeps your engine running as close to new as possible for as long as possible, giving you greater confidence when driving.
By keeping your engine as close to new as possible for as long as possible, full synthetic motor oil increases your safety while driving.
Information for consumers, recommendations for lubricants, and reporting safety flaws
Clean the area surrounding any filling plug, drain plug, or dipstick at all times.
lubrication before checking or draining it. This is crucial in dusty environments.
The dipstick locations will stop debris from entering the engine and other moving parts.
functioning (engine start and engine oil flowability) (engine start and engine oil flowability). motor oils with a lower viscosity
can improve fuel efficiency and performance in cold temperatures, but higher viscosity
In hot temperatures, engine oils are necessary for effective lubrication. Use of oils
prior to the subsequent oil change. choose the recommended oil viscosity now.
*1. Using engine oil with a viscosity is advised for optimum fuel efficiency.
SAE 5W-20 grade (API SM/ILSAC GF-4). But if there isn’t any motor oil available
Use the engine oil viscosity chart to choose the right engine oil for your nation.
How much oil does a Hyundai Sonata require?
Oil specification for the 2017 Hyundai Sonata is 5W-20. Fully synthetic oil, which should be changed every 7,500 to 10,000 miles and is generally better for your engine, is what we advise choosing. Although conventional oil is good and less expensive, you still need to change it more frequently.
The type of oil your vehicle requires should be indicated in the owner’s manual or on the engine’s oil cap. You now know where to quickly check!
Speaking of keeping up with your car’s upkeep, remember to do the same with your insurance. Fortunately, when you shop for an insurance with Jerry, we take care of all the labor for you, including finding you individual quotes from more than 55 providers and handling the paperwork and phone calls necessary to set up your new policy. Heck, if you decide to switch, we’ll even assist you terminate your current policy!
Does Hyundai advise using synthetic motor oil?
While conventional oil only lasts between 3,000 and 5,000 miles before it needs to be replenished, synthetic oil can last up to 10,000 miles before it needs to be changed. We absolutely recommend synthetic oil for the Hyundai Elantra because it offers drivers many more advantages than conventional oil does.
How frequently should I replace the oil in a Hyundai Sonata?
How often should I have my Hyundai Sonata’s oil changed? Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Hyundai advises changing your Hyundai Sonata’s oil and filter every 3,000 to 5,000 miles.
What kind of oil is used by Hyundai dealers?
When Hyundai’s automobiles leave the assembly line, Quaker State is also the company that supplies the original motor oil. Quaker State, a pioneer in consumer automotive goods and vehicle maintenance for more than 80 years, is built on confidence and giving its consumers the best value, just like Hyundai.
Can I replace the 5w20 in my Hyundai Sonata with 5w30?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because 5w20 oil was precisely considered when your engine was created, all of the parts that come into contact with it must be a specific viscosity after the engine reaches operating temperature, or 212a.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow considerably more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you use 5w30 oil instead of 5w20 when it is not advised or permitted by your owner’s manual, it could violate the powertrain warranty on your car, impair engine performance, and ultimately harm your engine.
Making sure your engine is protected with the appropriate insurance policy utilizing Jerry will help keep it running at its best. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
What oil is an alternative to 5w20?
Similar SAE ratings for 10w30 and 5w20 engine oils indicate that they will function similarly at running or high temperatures. As previously noted, the number 30 denotes the oil’s viscosity at high temperatures. Because 10w30 tends to thicken in cold climates, 5w20 is more appropriate for these settings.
Is 5W-20 oil traditional or synthetic?
Product Information Both new and used engines can use Pennzoil SAE 5w-20 Full Synthetic motor oil because it is a full synthetic oil. Compared to standard motor oil, it is engineered to offer 40% higher performance and enables for fewer oil changes.
Can you combine synthetic and conventional oils?
You’ve come to the proper place if you have a question concerning motor oil, and this is a crucial question. Jiffy Lube knows oil, after all. Every day, hundreds of drivers are assisted by qualified Jiffy Lube experts in choosing the proper motor oil, including whether to use synthetic or conventional oil and whether it is OK to combine different types of motor oil.
So, is it possible to combine synthetic and conventional oil? Yes. Mixing shouldn’t harm your engine if it’s something you do infrequently. To keep you moving until your next regularly planned maintenance check, let’s assume you wish to top off your oil. If the oil you use has the weight (or viscosity) indicated in your owner’s manual, mixing is acceptable.
5W-30 oil is it synthetic?
The #1 High Mileage brand, Castrol(r) GTX(r) High MileageTM 5W-30, is a premium synthetic blend motor oil designed especially for vehicles with over 75,000 miles on them.
5W20 or 5W30 is thicker, right?
Thus, 5w20 is a thinner oil during operation temperatures than 5w30 due to viscosity, whereas the latter is thicker. Most manufacturers today create engines that run on 5w20 oil, thus it’s crucial to keep with this viscosity and not switch to 5w30.
What happens if you fill your car’s engine with the incorrect oil?
The incorrect engine oil can harm an engine by improperly lubricating its parts. As a result, there will be metal-on-metal contact between the moving pieces. Soon after, friction develops, leading to engine component wear. Additionally, it might harm your engine’s pistons, oil pump, cylinder wall, bearings, and other parts. This will thus limit the engine’s life and almost probably result in an engine failure.
What drawbacks does synthetic oil have?
What are the benefits of switching from traditional to synthetic motor oil, then? Synthetic lubricants can have significant benefits when weighing the benefits and drawbacks. The following are a few of the biggest benefits synthetic engine oils (PAOs) often offer over traditional engine oils. Note that the list below makes the unlikely assumption that the additive package for the two options would be similar. The comparison would be more difficult because most synthetic lubricant formulas for cars would have a better additive package. In other words, is the better performance brought on by the synthetic base oil, the better additive(s), or a combination of both?
- Conventional mineral oils are typically more susceptible to chemical deterioration (oxidation) than synthetics when exposed to specific conditions. Combustion byproducts, contaminated fuel, contaminated water, metal particles, acids, pro-oxidants, and intense heat are some of these hazardous circumstances (e.g., from combustion). These situations are frequently present in engines. Sludge, varnish or deposits, corrosion, a decrease in viscosity, and poor engine performance are all consequences of oil degradation.
- The viscosity index of synthetic materials is greater by nature. This indicates that during typical engine startup and running conditions, the viscosity fluctuates less (becomes more stable) as the temperature changes. A key characteristic of lubricants is viscosity, which determines the film thickness or clearance between opposing metal surfaces that slide or rotate. Without this film thickness, there would be too much friction and wear.
- In comparison to synthetic oils, mineral oils are more likely to become so thick (high viscosity) at very low temperatures that the oil cannot be pumped or cannot circulate properly within the engine. Engine failure can result from grease famine situations and poor oil circulation.
- Mineral engine oils tend to be more volatile than synthetic engine oils. This indicates that less oil is lost to the engine’s exhaust stream, which contributes to air pollution. Additionally, it can require fewer oil changes in between cosmetic oil changes.
- The fact that synthetic oil lasts longer than normal oil is arguably its greatest benefit and the reason it is so well-liked. Around every 5,000 to 7,000 miles is the recommended change period for synthetic oil, while some brands advertise a significantly longer interval (15,000 to 25,000). The first bullet above describes the primary cause of the more frequent oil changes. Regardless of the type of oil you use, it is still advised to change your oil at the intervals your manufacturer specifies on a regular basis.
The following are a few drawbacks of synthetic oil to be aware of:
- Cost is arguably the most obvious drawback of synthetic oil. The cost of synthetic oil is often two to four times that of regular oil.
- When kept in a cold storage environment, synthetics may be more susceptible to additive precipitation. Certain additives are stratified as a result, which may cause them to completely separate from the oil.
- At highway speeds, synthetic multi-grade motor oils may have somewhat worse fuel efficiency than mineral oil. This is because synthetic oils don’t need as many viscosity index improvers (an ingredient) as mineral oils do. Through a process known as shear-induced transient viscosity thinning, this additive helps to reduce viscosity friction.
Is there a distinction between complete synthetic oil and synthetic blend oil?
A synthetic blend motor oil combines a combination of synthetic and conventional base oils for enhanced oxidation resistance (relative to conventional oil) and outstanding low-temperature qualities. This is the difference between synthetic oil and a synthetic blend.
Will adding 5w30 to a 5w20 engine hurt it?
The best performance is offered by 5W20 motor oil between -22degF (-30degC) and 77degF. (25degC).
In contrast, 5W30 motor oil operates best between -22°F (-30°C) and 95°F (35degC).
As you can see, these two types of oil operate quite differently from one another. Given these figures, it is obvious that using 5W30 motor oil in place of 5W20 might seriously harm your engine.