SAE 5W-20 is preferable above 5W-20 and 5W-30. Capacity: 4.2 quarts with filter. Check the oil level after refueling.
In This Article...
What kind of oil and how much is in the Hyundai Elantra?
The oil type and capacity for the 2014 Hyundai Elantra are S5W-20 or 5W-30 and 4.2 quarts. You ultimately need to change your oil. 5,000 to 10,000 kilometers apart is a decent general guideline. The engine will have issues if You don’t update it. The engine needs high-quality oil to function properly. You will eventually encounter problems with this fluid. A burning smell is a typical issue. The issue needs to be investigated right away to prevent an explosion in the vehicle. The engine may fail due to bad oil. You might get poor gas mileage. The engine could make a knocking sound.
In all weather conditions, Hyundai advises using 5W-20 or 5W-30 engine oil in the 2014 Hyundai Elantra. SAE 10W-30 oil may be used if SAE 5W-30 or 5W-20 oil are unavailable. But at the subsequent oil change, SAE 5W-30 or 5W-20 ought to be used in its place. 4.23 quarts of motor oil can be stored in total (4.0 liters).
Recommendations for Oil
In all weather conditions, Hyundai advises using 5W-20 or 5W-30 engine oil in the 2014 Hyundai Elantra. However, if the temperature won’t drop below 0 degrees F until your next scheduled oil change, you can choose 10W-30 oil. Your Elantra’s viscosity won’t alter whether you use standard or synthetic oil. The engine of the Elantra needs 4.2 quarts of oil to be refilled.
Which type of oil does Hyundai advise using?
No matter the Lexington weather, 5W-20 to 5W-30 oils have the ideal density to adequately lubricate and safeguard the components of your Hyundai Elantra engine. The 0W-15 or 10W-40 grade motor oil is insufficiently thin or thick to perform the required function.
How frequently should a Hyundai Elantra have its synthetic oil changed?
How often should I change the oil in my Hyundai Elantra? For traditional oil, Hyundai advises changing your Hyundai Elantra’s oil and filter every 3,000 to 5,000 miles. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles.
Elantras require synthetic oil, right?
Recommended Oil for Hyundai Elantra You can select between conventional and synthetic oil for the Hyundai Elantra. The best choice is conventional oil because it is more cost-effective. Unrefined crude oil is an alternative that will require more regular replacements but is less expensive initially.
What kind of oil is used by Hyundai dealers?
When Hyundai’s automobiles leave the assembly line, Quaker State is also the company that supplies the original motor oil. Quaker State, a pioneer in consumer automotive goods and vehicle maintenance for more than 80 years, is built on confidence and giving its consumers the best value, just like Hyundai.
Uses Hyundai 100% synthetic motor oil?
Full synthetic motor oil is pre-filled in all Hyundai vehicles before they leave the manufacturer and arrive at our showroom. As a result, it is advised to keep using synthetic oil to give your car’s engine the best possible protection. Our dealership has switched to Quaker State Full Synthetic solely to give you the most value and protection for your car, keeping it in top running condition.
The advantages of Quaker State Full Synthetic Oil include:
- Engine Cleaner & Less Wear
- Engine Durability
- increases fuel efficiency
- Start-up and Extreme Temperature Ranges
Can you combine synthetic and conventional oils?
You’ve come to the proper place if you have a question concerning motor oil, and this is a crucial question. Jiffy Lube knows oil, after all. Every day, hundreds of drivers are assisted by qualified Jiffy Lube experts in choosing the proper motor oil, including whether to use synthetic or conventional oil and whether it is OK to combine different types of motor oil.
So, is it possible to combine synthetic and conventional oil? Yes. Mixing shouldn’t harm your engine if it’s something you do infrequently. To keep you moving until your next regularly planned maintenance check, let’s assume you wish to top off your oil. If the oil you use has the weight (or viscosity) indicated in your owner’s manual, mixing is acceptable.
What occurs if I choose the incorrect oil?
The incorrect engine oil can harm an engine by improperly lubricating its parts. As a result, there will be metal-on-metal contact between the moving pieces. Soon after, friction develops, leading to engine component wear. Additionally, it might harm your engine’s pistons, oil pump, cylinder wall, bearings, and other parts. This will thus limit the engine’s life and almost probably result in an engine failure.
Synthetic oil: Is it better?
Yes, synthetic oil is superior to regular oil for engines. While conventional oil, or mineral oil, can provide enough lubrication, it cannot match the overall engine protection and performance offered by synthetic oils.
When opposed to the less refined base oils used in conventional oils, synthetics use higher grade base oils, making conventional oils:
- Less stable chemically
- easier to oxidize and acidify
- faster to degrade and lose protective properties
In general, full synthetic motor oils outperform traditional and synthetic blend motor oils in terms of engine protection and performance. The sophisticated complete synthetic motor oils from Mobil 1TM are precisely developed with an additive system that offers performance advantages over conventional and synthetic blend oils by:
- preventing sludge and deposit accumulation
- minimizing wear
- safeguarding against extreme temperatures
- preventing oil deterioration
Therefore, all of the chemistry that is developed in a lab has a significant impact on the road.
Full synthetic motor oil: What does that mean?
Synthetic oil is a lubricant made of synthetic chemical compounds, which are created by disassembling and then reassembling petroleum molecules. Millions of molecules of synthetic oil may be seen under a microscope, all with a remarkably uniform size and structure. On the other hand, refined crude oil is used to create mineral or conventional oil. Millions of molecules in all sizes, shapes, and configurations can be seen in a drop of standard oil when examined under a microscope. Synthetic oil can be produced from a variety of base types and can be entirely synthetic or a blend of synthetics.
Full synthetic oils are created molecule by molecule without the use of petroleum, start with a synthetic base stock, and contain additives to hasten the breakdown of the oil. A synthetic blend is a combination of synthetic base stocks and conventional motor oil. You get a little bit more protection when using the synthetic base stock in combination with the conventional mineral oil than when using the conventional oil alone.
There are numerous varieties of synthetics, each with notably own qualities and uses. However, polyalphaolefins are the most common synthetics used in automobile servicing (PAO). For the sake of simplicity, PAOs will be the main type of synthetic oil mentioned in this article.
Adding oil to a hot engine is possible.
To keep your automobile operating smoothly for as long as possible, keep the oil level in check and change it frequently. But when should you apply oil to your car’s engine—while it’s hot or when it’s cold? How does the temperature of your engine impact the oil in your car?
Even with a hot engine, you can add oil to your vehicle. Check the oil level when the engine has cooled, although if your car is warm or just a little hot, you can add oil as long as it has been off for a while. Be careful not to fill the oil up past the dipstick’s “max” line.
5W-30 oil is it synthetic?
The #1 High Mileage brand, Castrol(r) GTX(r) High MileageTM 5W-30, is a premium synthetic blend motor oil designed especially for vehicles with over 75,000 miles on them.
5W-20 oil is it synthetic?
With Mobil 1 5W-20 advanced full synthetic motor oil, your engine will run like new and be protected for up to 10,000 miles between oil changes while still receiving superior engine protection.
Nothing works better overall than Mobil 1, a motor oil that is a part of many various car models, including a few high-performance ones.
In order to meet or surpass the industry’s strictest standards, Mobil 1 5W-20 motor oil is created with a proprietary blend of high-performance synthetic base stocks strengthened with a carefully calibrated additive component system.
ExxonMobil advises using Mobil 1 5W-20 motor oil in all sorts of contemporary gasoline-powered vehicles, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.
- Cars
- Trucks
- SUVs
- Vans
Compared to our conventional and synthetic blend oils, Mobil 1 5W-20 motor oil performs better. Additionally, the sophisticated full synthetic formula can:
Please review our limited Mobil 1 warranty. The manufacturer’s suggested oil viscosity grade, API service classification, and any builder approval are all listed in your owner’s handbook. For a fast glance at significant manufacturer approvals and details on the zinc and phosphorus contents in Mobil 1 5W-20, you can also consult the Mobil 1TM Product Guide.
Follow the oil life sensor or the suggested oil change schedule in your owner’s manual if your car is still under warranty. To guarantee efficient operation, proper maintenance procedures are necessary, including routinely monitoring the oil level to make sure the right amount of oil is present.
*Protection lasts for a year or 10,000 miles, whichever comes first. Read our Mobil 1 limited warranty for more details.
Can I replace the 5W-20 in my Hyundai with the 5W-30?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because 5w20 oil was precisely considered when your engine was created, all of the parts that come into contact with it must be a specific viscosity after the engine reaches operating temperature, or 212a.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow considerably more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you use 5w30 oil instead of 5w20 when it is not advised or permitted by your owner’s manual, it could violate the powertrain warranty on your car, impair engine performance, and ultimately harm your engine.
Making sure your engine is protected with the appropriate insurance policy utilizing Jerry will help keep it running at its best. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
Can I substitute 5w30 for 5w20 in a high mileage vehicle?
Let’s discuss the distinctions between 5W20 and 5W30 now that you are aware of the many types of oil that are available. This will remind you that these two very different oil kinds should not be mixed up.
Let’s first explain what each number and letter in an oil’s description represents. For instance, in 5W20, the “W” stands for “winter,” and the “5” designates the oil’s classification.
This reveals how the oil will perform in cooler climates. In this situation, the bigger number, 20, denotes how well the oil performs in hot conditions.
By looking at these data, you may determine the thickness of oil at any particular temperature. You should choose one with greater numbers if your oil is thicker.
With this knowledge, we may say that 5W30 is thicker than 5W20. Oil with a thicker viscosity does not flow as smoothly as oil with a lighter viscosity.
You should use a thinner oil for cold-weather performance and a thicker oil for warm-weather performance.
If the manufacturer of your car advises using 5W20, stick with that brand. The appropriate viscosity type for your car depends on how the engine was constructed by the manufacturer, even though both 5W20 and 5W30 motor oils are suitable for high mileage engines.
If you use 5W30 when it’s recommended that you use 5W20, your car may not obtain decent fuel economy. Use the same type of oil as recommended in order to get the maximum performance out of your car.