SAE 5W-20 is preferable above 5W-20 and 5W-30. Capacity: 4.9 quarts with filter.
In This Article...
What kind of oil and how much is in the Hyundai Santa Fe?
For the 2.4 L engine, the 2011 Hyundai Santa Fe’s oil specifications are S5w-20 or 5w-30 and 4.86 quarts. An engine has a lot of problems that can arise. Engine difficulty could be caused by a spark plug that pops off. It may be necessary to tighten up a loose gasket right away. Oil leaks are possible and must be repaired as quickly as feasible. Overheating of the engine is a severe issue. This could result in fires and the car exploding. There can be excessive oil use, necessitating an earlier oil change than anticipated. Every 60,000 miles the coolant needs to be changed. You should replace your air filter every 15,000 to 30,000 miles. Unless it’s a copper spark plug, the spark plugs must be replaced every 100,000 miles. Every 30,000 miles, a cooper spark plug needs to be replaced.
The 3.5L engine in the 2011 Hyundai Santa Fe has a total oil capacity of 5.49 US quarts (5.2 liters), whereas the 2.4L engine has a capacity of 4.86 US quarts (4.6 liters). For the 2011 Hyundai Santa Fe, it is advisable to use only SAE classification 5W-20 or 5W-30.
Recommendation for an Oil Change
According to the owner’s manual for my 2011 Santa Fe, I should replace the oil and filter every 7500 miles. Am I understanding that right? I believed it needed to be replaced every 3,000–5,000 miles.
Regardless of what they suggest, I would perform more frequent oil changes. Even if it called for synthetic oil, I would replace the oil at 5,000 miles, and at 3000 miles if it called for conventional oil.
How is the oil filter changed in a 2011 Hyundai Santa Fe?
- Locate Oil Drain – Find the oil drain plug under the car.
- Prepare the workspace, drain the oil, and then reinstall the plug.
- Find the oil filter by looking for it.
- Place the drain pan in the proper position and remove the oil filter.
How frequently should a Hyundai Santa Fe have its oil changed?
For traditional oil, Hyundai advises changing your 2020 Hyundai Santa Fe’s oil and filter every 3,000 to 5,000 miles. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles.
How long does a Hyundai Santa Fe need to be serviced?
When Should I Change the Oil in a Hyundai Car? A Hyundai vehicle shouldn’t typically go more than 7,500 to 10,000 miles without an oil change.
Does Hyundai advise using synthetic motor oil?
While conventional oil only lasts between 3,000 and 5,000 miles before it needs to be replenished, synthetic oil can last up to 10,000 miles before it needs to be changed. We absolutely recommend synthetic oil for the Hyundai Elantra because it offers drivers many more advantages than conventional oil does.
Which brand of oil does Hyundai use?
When Hyundai’s automobiles leave the assembly line, Quaker State is also the company that supplies the original motor oil. Quaker State, a pioneer in consumer automotive goods and vehicle maintenance for more than 80 years, is built on confidence and giving its consumers the best value, just like Hyundai.
What oil is an alternative to 5w20?
Similar SAE ratings for 10w30 and 5w20 engine oils indicate that they will function similarly at running or high temperatures. As previously noted, the number 30 denotes the oil’s viscosity at high temperatures. Because 10w30 tends to thicken in cold climates, 5w20 is more appropriate for these settings.
Can I replace my Hyundai’s 5W20 with 5W30?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because 5w20 oil was precisely considered when your engine was created, all of the parts that come into contact with it must be a specific viscosity after the engine reaches operating temperature, or 212a.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow considerably more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you use 5w30 oil instead of 5w20 when it is not advised or permitted by your owner’s manual, it could violate the powertrain warranty on your car, impair engine performance, and ultimately harm your engine.
Making sure your engine is protected with the appropriate insurance policy utilizing Jerry will help keep it running at its best. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
Is 5W-20 oil traditional or synthetic?
Product Information Both new and used engines can use Pennzoil SAE 5w-20 Full Synthetic motor oil because it is a full synthetic oil. Compared to standard motor oil, it is engineered to offer 40% higher performance and enables for fewer oil changes.
What happens if you fill your car’s engine with the incorrect oil?
The incorrect engine oil can harm an engine by improperly lubricating its parts. As a result, there will be metal-on-metal contact between the moving pieces. Soon after, friction develops, leading to engine component wear. Additionally, it might harm your engine’s pistons, oil pump, cylinder wall, bearings, and other parts. This will thus limit the engine’s life and almost probably result in an engine failure.
Can I substitute 5w30 for 5w20 in a high mileage vehicle?
Let’s discuss the distinctions between 5W20 and 5W30 now that you are aware of the many types of oil that are available. This will remind you that these two very different oil kinds should not be mixed up.
Let’s first explain what each number and letter in an oil’s description represents. For instance, in 5W20, the “W” stands for “winter,” and the “5” designates the oil’s classification.
This reveals how the oil will perform in cooler climates. In this situation, the bigger number, 20, denotes how well the oil performs in hot conditions.
By looking at these data, you may determine the thickness of oil at any particular temperature. You should choose one with greater numbers if your oil is thicker.
With this knowledge, we may say that 5W30 is thicker than 5W20. Oil with a thicker viscosity does not flow as smoothly as oil with a lighter viscosity.
You should use a thinner oil for cold-weather performance and a thicker oil for warm-weather performance.
If the manufacturer of your car advises using 5W20, stick with that brand. The appropriate viscosity type for your car depends on how the engine was constructed by the manufacturer, even though both 5W20 and 5W30 motor oils are suitable for high mileage engines.
If you use 5W30 when it’s recommended that you use 5W20, your car may not obtain decent fuel economy. Use the same type of oil as recommended in order to get the maximum performance out of your car.
What makes 5w20 and 5w30 different from one another?
The engine oil type 5w20 is distinguished by its oil weight of 20 in warm weather and a winter grade of 5. It has a lower viscosity than 5w30. 5w30 is thicker since it has the same viscosity rating of 5 in the winter but an oil weight of 30 in the summer.