2016 Hyundai Elantra Tires: Sport P215/45R17, Limited P215/45R17, SE P195/65R15, Value Edition P205/55R16.
In This Article...
Size Reduced: 195-65-15
Your 2016 Hyundai Elantra’s original tire size is P195/65R15 89T. Below is a color-coded description of the tire size for the 2016 Hyundai Elantra.
The tire size was created to accommodate rims or wheels with a diameter of 15 inches.
With a load index of 89, this tire can support an object weighing up to 1276 pounds (580 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 65%. In other words, 65% of the width is represented by the sidewall height of your tire (measured from the rim’s edge to the tread). The sidewall height in this instance comes out to 126 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 118 mph (190 km/h), according to its speed rating of T. A faster pace becomes risky.
Which tire manufacturer does Hyundai use?
The best tires for Hyundai are available from Michelin(r) to satisfy your needs for safety and performance in every season and application.
Hyundai does it replace tires?
Your car’s tires keep it on the road and going in the desired direction. Here are some pointers for maintaining the tire and air pressure on your car.
To ensure that your tires are properly filled and wearing evenly, check your tire pressure from time to time. Tire life can be shortened by over- or under-inflation, which can affect how the car handles and how well it can stop.
Tire Pressure Monitoring Systems are standard on the majority of vehicles built in 2007 and later (TPMS). For information on your vehicle’s TPMS, please consult your owner’s manual. On many, TPMS lets you check the tire pressure as it is right now and alerts you if it drops too low. A low-tire-pressure indicator is illuminated by the TPMS if more than one of your tires is considerably underinflated.
It only takes a few minutes to maintain properly inflated tires; all you need to do is use an air compressor at a petrol station with one. Please be aware that tires might naturally lose 1 to 2 PSI each month, especially if you don’t drive your car often.
Furthermore, it’s critical to remember that tires can lose their integrity even with proper inflation. Checking tread depth just requires a fifth of the tread. By placing a quarter upside-down in the tire tread, you may periodically check the depth of the tread. The tire needs to be changed if you can see George Washington’s head above it.
When you do require tires, your neighborhood Hyundai dealer has the right ones in stock, and factory-trained mechanics will install them. All tires purchased from the authorized Hyundai Tire Center include a 24-month warranty against road hazards. Schedule a meeting right away!
What is the cost of a Hyundai tire replacement?
Best in Automotive Repair The average price to repair a wheel on a Hyundai Elantra ranges from $631 to $643. Between $44 and $56 is projected to be the cost of labor, while $587 is the cost of the parts.
How can I determine my tire size?
The initials M and S (M +S) signify that the tire satisfies the requirements set forth by the Rubber Manufacturers Association for a mud and snow tire. There are three possible letter combinations for the letters: M+S, M/S, and M&S. These tires are all-season.
- You can find this information on the tire information sticker on your driver’s side door or in the glove box of your car in the owner’s handbook.
- Typically, those components include all the details about your tire’s size, characteristics, and recommended tire pressure.
The entire explanation of the numbers and letters may be found under the “Find your tire size on your tire” link.
Do Hyundai Elantras handle snow well?
When fitted with the proper tires and driven responsibly, the Elantra is a good option for winter driving. This sporty sedan provides a stable ride on snow-covered roads. and has only a 5.3-inch ground clearance as its primary restriction.
With a front-wheel-drive (FWD) drivetrain, the Hyundai Elantra simply implies that the engine propels the front wheels.
The majority of the weight is on the engine, which makes this a smart choice for driving through the snow because the engine’s weight on the tires improves traction.
The Elantra’s 147 horsepower engine produces 132 lb-ft of torque, giving it more than enough power to navigate slick roads.
In order to provide your Elantra with the finest possible handling and performance during the winter, we highly advise fitting it with snow tires.
Are the wheels on Kia and Hyundai the same?
I currently have a Hyundai Kona that I am driving on winter tires that I had previously owned on rims from a Hyundai i30/Elantra GT.
The speedometer will deviate too much if your tire diameter doesn’t stay the same.
Can I use 16-inch wheels instead of 14-inch ones?
The only factor that matters is YOUR TIRES’ outer diameter. There is no difference if the outside diameter of the 14- and 16-inch tires is the same.
How can I tell if the wheels will fit my vehicle?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
How can I determine my rim size?
The size of the wheels on your car should come first. You can discover that on the inside of the driver’s door frame or on the sidewall of the tires on your original wheels. For further information, see Tire Size Explained (Reading the Sidewall).
The fifth set of numbers and characters represents the wheel diameter (in inches or millimeters). What do the numerals on rims mean? The distance between the two bead seat regions, where the tire is secured to the wheel, is indicated by this number.
The width and offset of a wheel are also included in its size. The breadth equals the separation between each bead seat (from inside to the outside). The wheel and tire set’s alignment with the wheel well is determined by the offset.
What does the Hyundai warranty not cover?
Hyundai vehicles come with bumper-to-bumper warranties that last for five years or 60,000 miles, whichever comes first. The coverage extends to manufacturing flaws that appear despite routine maintenance and operation of the vehicle. This is relevant to numerous chassis, electronic, interior, and outside components. The paint, which is protected for three years or 36,000 miles, is one of the exclusions.
For the first year or 12,000 miles, a few basic service adjustments, parts, and accessories are included. Routine maintenance tasks like replacing filters, wiper blades, burned-out bulbs, and fuses, as well as oil and other fluid changes, are not included. Additionally, the majority of warranty coverage may not apply to modified or damaged automobiles.
A wheel offset is what?
The distance between a wheel’s hub mounting surface and centerline is known as the offset of the wheel. There are three different forms of offset (measured in millimeters). * The distance between a wheel’s hub mounting surface and centerline is known as its offset.
Are spacers for wheels safe?
Wheel spacers that are placed correctly are therefore completely secure. The wheel is held to the hub by the clamping force of the wheel stud. The wheel studs elastically stretch as the lug nuts are tightened, acting as very firm springs. To 90% of the stud’s elastic limit, the lug nuts should be tightened.
On wheels, what does 0 offset mean?
The offset is the separation between the wheel’s center line and the hub mounting face at the back of the wheel.
The term “offset” (short for “Einpresstiefe,” which is German for “insertion depth”) is typically stamped or engraved onto the wheel and is measured in millimeters of “ET.”
Wheels with a positive offset have their mounting face facing the front of the wheel. Positive ET wheels are common on front-wheel drive cars.
Wheels with zero offset are categorically referred to as “ET 0” since their mounting face is parallel to the wheel’s center line.
Strong rear-wheel drive cars frequently have wheels with negative offset, which have their mounting facing the back of the wheel.
When is an offset too much?
- Your daily driver can look and handle much better with new wheels and tires.
- Measuring offsets can be challenging. The incorrect offset can reduce vehicle stability even if the tire and wheel are sufficiently spaced apart. In general, you don’t want the new offset to depart from the old offset by more than 5 millimeters when using new wheels.
- Backspacing must be taken into account in addition to offset, particularly if your new wheels are wider than the originals.
- Ask a tire expert for help to make sure your tire and wheel combo fits properly, stays within load capacity, and provides you with the handling and stability you require.
Would you like to see some fitting alternatives for your vehicle? Look through the wheels that fit your make and model.
Important Notice: The information above is generic in nature and was compiled from a number of sources considered to be reasonably reputable. Your vehicle may operate differently than a regular vehicle, or its components may need to be repaired or replaced. For specific cautions, notifications, and other guidance related to the topics covered here, please refer to your owner’s handbook.