- The standard tire size for the Hyundai Elantra 1.6 T-GDi is 235/40R18, and the standard rim size is 8Jx18 ET56.
- The standard tire size for the Hyundai Elantra 2.0 MPi is either 195/65R15, 205/55R16, or 225/45R17, while the usual rim size is either 6Jx15 ET42, 6.5Jx16 ET46, or 7Jx17 ET49.
In This Article...
Hudouc
To cut a long tale short, the Accord has suffered as a result of my earlier teenage driving, which did not involve carefully dodging Ohio potholes. The wheels are all very slightly bent. I recently discovered a set of alloy wheels measuring 16×6.5 from a Hyundai Elantra, and I was wondering if there was anything I should be aware of about the fitments. The Hyundai’s bolt patterns are same, its offset is 2 to 5 mm smaller, and its diameter and width are the same as those of my factory steel wheels. Anything else I need to be concerned about? Caliper clearance?
How can I tell if the wheels will fit my vehicle?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
Are wheels from Hyundai and Kia interchangeable?
I currently have a Hyundai Kona that I am driving on winter tires that I had previously owned on rims from a Hyundai i30/Elantra GT.
The speedometer will deviate too much if your tire diameter doesn’t stay the same.
Which rims can be swapped out?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Can I mount rims of any size on my car?
You could decide to upgrade the wheels on your cars at some point. However, you might not be aware of which wheels from other cars will fit your automobile.
Fortunately, any vehicle’s wheel can be used as a replacement. The original wheel should, however, have the same bolt pattern, wheel offset, and size as the replacement.
By looking at the sticker plate on your door, you may determine the appropriate size of the replacement. Measure the wheel or get guidance from an auto retailer for a suitable replacement.
By choosing the incorrect size wheel, you run the risk of harming your car’s suspension, wheels, and brakes. You could even need to stop at the petrol station more frequently for refills.
Which bolt pattern is employed by Hyundai?
Although the majority of Hyundai models feature a 5×4.5 lug pattern, there are other dimensions you should be aware of if you intend to change your tires.
A
Hyundais make excellent family vehicles that are suitable for both long road trips and regular commutes. However, before you can switch out your set of tires after all that activity wears out your current set, you must first be aware of your Hyundai’s lug pattern. A
What size lug nuts come on a Hyundai?
The wheel lug nuts have a diameter of 21mm. It may take numerous short throws and wrench resets to use a lug wrench like the one that came with the car. Once they are initially freed, the lug nuts might be removed the rest of the way much more easily with a ratchet, even a 20 volt battery-powered driver, and a 21mm deep hole socket, preferably six-sided. The spare tire can also be raised and lowered using the lug wrench.
How can I determine my rim size?
The size of the wheels on your car should come first. You can discover that on the inside of the driver’s door frame or on the sidewall of the tires on your original wheels. For further information, see Tire Size Explained (Reading the Sidewall).
The fifth set of numbers and characters represents the wheel diameter (in inches or millimeters). What do the numerals on rims mean? The distance between the two bead seat regions, where the tire is secured to the wheel, is indicated by this number.
The width and offset of a wheel are also included in its size. The breadth equals the separation between each bead seat (from inside to the outside). The wheel and tire set’s alignment with the wheel well is determined by the offset.
What vehicles have a bolt pattern of 5 114.3?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Do larger wheels make a difference?
There are benefits to plus-sizing, but there are also drawbacks, whether you switch to a larger-diameter wheel as an option on a new automobile or as aftermarket wheels for the car you currently own. You need new tires when you upgrade to a higher wheel diameter, such going from 17 to 18 inches. When those tires cross over bumps and potholes, they need to have a lower profile (or sidewall height) to maintain appropriate clearance, which forces the suspension to fully compress and rebound. The height of the tire should drop in proportion to a one-inch increase in wheel diameter in order to maintain the same overall tire diameter.
The correct tire size for larger rims can be 225/55R18, with the distinctions being the larger-diameter wheel size, wider tread (225 millimeters instead of 215), and lower profile, 55 instead of 65. For instance, if the original stock tire size is 215/65R17 and you purchase 18-inch wheels. This indicates that the sidewall’s height is equal to 55 percent of the tread’s width.
If you switch to bigger wheels without taking sidewall height into account, you run the danger of harming the suspension, wheels, and tires. In addition, your speedometer will read incorrectly since the wheels are turning faster than they were. Speedometer and odometer readings should alter very little, if at all, by matching lower-profile tire sizing to larger-diameter wheel size. There is less air and rubber cushion and more stiffness with larger wheels and lower profile tires, which increases the likelihood that hitting a huge pothole will cause damage to the tire, wheel, or both.
Lower-profile tires also typically have a harsher ride and may be noisier than the smaller, conventional rubber, despite the fact that larger-diameter wheels and tires should improve handling and high-speed performance.
The added weight of the larger tires and wheels may outweigh certain potential performance advantages. For instance, an 18-inch tire will likely weigh at least a few pounds more than a 16- or 17-inch tire. That might apply to wheels with bigger diameters as well. The performance of an aluminum alloy wheel is improved since it has less unsprung weight than a steel wheel. However, adding an 18- or 19-inch alloy rim in place of a conventional 17-inch alloy wheel would increase weight unless it’s a pricey, lightweight model.
Larger wheels are more expensive. The cost of wheels and tires increases with size. The initial cost might not be too high if you purchase larger wheels as part of an option package for a new car or obtain them as standard equipment on a higher trim level. However, the additional cost can be significant when it comes to replacing a damaged wheel or tire (or just the new tires when the tread is worn).
Can I use 16-inch wheels instead of 14-inch ones?
The only factor that matters is YOUR TIRES’ outer diameter. There is no difference if the outside diameter of the 14- and 16-inch tires is the same.
Is exactness of the bolt pattern required?
Nothing is more fashionable than safety, and having the correct bolt pattern guarantees a secure fit. No matter how similar in size they may appear, you should never try to install wheels on your car that don’t have the same bolt pattern as the ones that came with it. The wheel may not mount securely if the bolt pattern is incorrect.
What distinguishes the five lug patterns?
While it’s simple to convert bolt patterns from millimeters to inches if you’re attempting to determine the pattern of your wheels, it’s crucial to remember that bolt patterns are measured in millimeters. A 5×120 bolt pattern, for instance, designates 5 holes that are each 120mm in diameter.
Typically, 4-lug bolt designs are produced for compact and midsize vehicles. As one of the most used bolt patterns, they make it simpler to find aftermarket or customized wheels. There are five different 4-lug patterns: 4×98, 4×100, 4×108, 4×110, and 4×114.3.
Mid-size, normal, full-size, and luxury automobiles are frequently made with 5-lug bolt designs. Because it is by far the most typical layout, finding aftermarket wheels and lug nuts is simple. Among 5-lug patterns are the following: 5, 5, 100, 5, 108, 5, 10, 11, 2, and 114. 3, 5×115, 5×120, 5×120. 7, 5×127, 5×130, 5×135, 5×139. 7, 5×155, 5×165.1, 5×205, and 5×150.
For pickups, midsize SUVs, and full-size SUVs, 6-lug bolt designs are produced. The availability of 6-lug bolt designs makes it simple to find aftermarket wheels for your truck or SUV. There are six different 6-lug bolt patterns: 6×114.3, 6×115, 6×120, 6×127, 6×132, 6×135, and 6×139.7.
Midsize, medium, full-size, and luxury automobiles are frequently made using 8-lug bolt designs. It is simpler to find custom or aftermarket wheels because to the widespread use of 8-lug bolt designs. There are four different patterns that make up this bolt pattern: 8×165.1, 8×170, 8×180, and 8×200.
A 4×100 bolt pattern: what is it?
The stud count (four) and bolt circle measurement (one hundred), the notional circle determined by the studs’ centers, make up the 4×100 Bolt Pattern or Pitch Circle Diameter (PCD).
How does 5×114 3 translate?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).