The most suggested type of oil for Hyundai Tucson models made in 2021 or later is 5W-20, while SAE 5W-20, SAE 5W-30, and SAE 10W-30 will all work well. Only use 10W-30 in environments that are warmer than 64 degrees Fahrenheit. On the other side, if your vehicle is a 2022 or newer model, you must use SAE 0W-20.
In This Article...
What kind of engine oil is used in Hyundai Tucson?
Sae 5w-20 motor oil is the recommended oil type for the Hyundai Tucson. Prior to changing the oil in your automobile, you should make sure it has been parked and turned off for a few hours. Otherwise, you risk burning yourself on the hot oil in the automobile. Look for the oil pan in the engine area, and look underneath for the drain plug. Place a bucket underneath the plug, then take it out. As a result, the oil will be able to drip into the pan. Allow it to continue doing this for about an hour or until the dripping stops. Put the drain cap back on after it stops dripping, then look for the intake port on the top of the oil pan. Fill the oil pan completely using a funnel, being careful not to overfill it. It’s okay to go just a bit under, but going over can result in leaks and oil burnoff. Once it is filled, shut off the port, clean up any spilled oil, and you are done.
SERPRESULT
High Mileage STP Engine Oil High Mileage Conventional 5W-20 1 Quart STP Engine Oil Conventional 5W-20 1 Quart STP Engine Oil
Typically, synthetic oil needs to be replaced every 7,500 to 10,000 miles.
The highest quality motor oil for your car is full synthetic motor oil.
Which type of oil should I use in my Hyundai Tucson?
Use 5W-20, 5W-30, or SAE 5W-20 oil in Hyundai Tucson vehicles with a 2.0-liter or 2.4-liter four-cylinder engine from 2016 to 2021. Both conventional and synthetic oil will function, although synthetic oil typically has a lifespan of around 5,000 miles longer.
What kind of oil change is suggested for a Hyundai Tucson?
If using synthetic oil, which we advise, the Hyundai Tucson requires an oil change every 7,500 to 10,000 miles. Every 3,000 to 5,000 miles, if using normal engine oil, an oil change is advised. Every oil change should be followed by an oil filter inspection, regardless of the type of oil.
Utilizes synthetic oil the Hyundai Tucson 2022?
You want to make sure you take good care of your car when it comes to maintenance. Making use of the top upkeep supplies is a part of it. You’ve come to the right place if you’re seeking for the best engine oil for the Hyundai Tucson. We did extensive study on the subject to compile a list from the best sources for you. See our conclusions below.
The following lubricants will work with Hyundai Tucsons powered by 2.0-liter or 2.4-liter four-cylinder engines:
- SAE 5W-20
- SAE 5W-30
- SAE 10W-30
However, if you have a model from 2022 or after, the engine oil is SAE 0W-20. Both conventional and synthetic oils can be used safely, although 10W-30 should only be used in environments that are warmer than 64 degrees Fahrenheit. Additionally, SAE 5W-20 is the greatest option out of the three viscosities.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Keep reading for a list of the top brands to use in your engine now that you are aware of the types of oils your Hyundai Tucson may use. Additionally, you’ll find out how long your car will survive, whether it’s difficult to repair, and other information.
What kind of oil is used by Hyundai dealers?
When Hyundai’s automobiles leave the assembly line, Quaker State is also the company that supplies the original motor oil. Quaker State, a pioneer in consumer automotive goods and vehicle maintenance for more than 80 years, is built on confidence and giving its consumers the best value, just like Hyundai.
Does Hyundai advise using synthetic motor oil?
When you request a synthetic blend oil from one of our service specialists, you will receive a combination of synthetic and conventional oil. For cars and trucks that routinely run at high RPMs and tow big loads, we advise using synthetic blend oil. This group can also include high-mileage motor oil, a special blend that contains additives to satisfy the demands of vehicles with a high mileage (75,000 or more).
How long can I go without having my Hyundai’s oil changed?
Every 7,500 to 10,000 miles on average, a Hyundai oil change is advised; nevertheless, it is crucial to check your owner’s manual to be sure.
5W 30 oil is it synthetic?
The #1 High Mileage brand, Castrol(r) GTX(r) High MileageTM 5W-30, is a premium synthetic blend motor oil designed especially for vehicles with over 75,000 miles on them.
Can you combine synthetic and conventional oils?
You’ve come to the proper place if you have a question concerning motor oil, and this is a crucial question. Jiffy Lube knows oil, after all. Every day, hundreds of drivers are assisted by qualified Jiffy Lube experts in choosing the proper motor oil, including whether to use synthetic or conventional oil and whether it is OK to combine different types of motor oil.
So, is it possible to combine synthetic and conventional oil? Yes. Mixing shouldn’t harm your engine if it’s something you do infrequently. To keep you moving until your next regularly planned maintenance check, let’s assume you wish to top off your oil. If the oil you use has the weight (or viscosity) indicated in your owner’s manual, mixing is acceptable.
Can I replace the 5W-20 in my Hyundai with the 5W-30?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because 5w20 oil was precisely considered when your engine was created, all of the parts that come into contact with it must be a specific viscosity after the engine reaches operating temperature, or 212a.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow considerably more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you use 5w30 oil instead of 5w20 when it is not advised or permitted by your owner’s manual, it could violate the powertrain warranty on your car, impair engine performance, and ultimately harm your engine.
Making sure your engine is protected with the appropriate insurance policy utilizing Jerry will help keep it running at its best. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
Is 5W 20 oil traditional or synthetic?
Raffinated crude oil and a number of additives are used to create 5W-20 conventional oil. It is advised for engine protection and lubrication since it offers appropriate performance at normal operating temperature.
Synthetic base oil (hydrocarbon atoms that have been purified and changed) and additives make up 5W-20 synthetic motor oil. It is comparatively more stable in warm temperatures because to the synthetic base oil and various additives.
It can prevent against engine wear and tear and help keep engines clean so that they can endure severe temperatures easier. Additionally, synthetic engine oil will last longer than regular oil.
There is also synthetic blend oil in the 5W-20 range. Although synthetic blend 5W-20 is frequently less expensive than synthetic motor oil, it protects better and has a longer lifespan than regular oil.
What happens if 5W-20 is used in place of 5W-30?
If you use 5W20 oil in an engine made for 5W30, the reduced viscosity will seriously harm your car. Several issues, such as decreased fuel efficiency and oil leakage, might occur when utilizing the wrong thickness.
What makes 5W-20 and 5W-30 different from one another?
The main distinction between 5w20 and 5w30 The engine oil type 5w20 is distinguished by its oil weight of 20 in warm weather and a winter grade of 5. It has a lower viscosity than 5w30. 5w30 is thicker since it has the same viscosity rating of 5 in the winter but an oil weight of 30 in the summer.
What distinguishes 5W-20 from 0W 20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
5W-20 is an oil with a relatively heavier viscosity and is better for use in the -22°F to 68°F range of operating temperatures.