We’ve written in-depth articles about the Hyundai Sonata and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the best replacement tires or rims for your Sonata today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
All Hyundai Sonata generations produced after 2009 feature a center bore of 2.64 inches (67.1mm), a bolt pattern of 5×4.5 inches (5×114.3mm), and five lug nuts with a thread size of M12 x 1.5 that require 78.9 to 93.7 lb-ft (107 to 127Nm) of torque to be tightened.
The bolt pattern on Hyundai Sonata models made before 2005 is 4×4.5 inches (4×114.3mm). The rest of the requirements stay the same.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
In This Article...
What is the bolt pattern for a Hyundai Sonata?
Bolt pattern for the Hyundai Sonata is iS5 X 114.3 mm. Someday, this component will need to be modified. Avoid getting into any accidents on the road. Your tires should be replaced every 30,000 to 50,000 miles. The secret to avoiding crashes is to make sure your tires are in top shape. At some point, you’ll run across issues with this component. You can have problems with cupping. You can experience issues with feathering. To watch out for is premature tire wear. Once a month, make sure to check the tire pressure. In case you run over something sharp, look for any holes. At some point, the component could come loose.
FAQ
Although the majority of Hyundai models feature a 5×4.5 lug pattern, there are other dimensions you should be aware of if you intend to change your tires.
A
Hyundais make excellent family vehicles that are suitable for both long road trips and regular commutes. However, before you can switch out your set of tires after all that activity wears out your current set, you must first be aware of your Hyundai’s lug pattern. A
What size lug nuts come on a Hyundai?
The wheel lug nuts have a diameter of 21mm. It may take numerous short throws and wrench resets to use a lug wrench like the one that came with the car. Once they are initially freed, the lug nuts might be removed the rest of the way much more easily with a ratchet, even a 20 volt battery-powered driver, and a 21mm deep hole socket, preferably six-sided. The spare tire can also be raised and lowered using the lug wrench.
Which wheels suit the Hyundai Sonata?
What size wheels come on the Hyundai Sonata? With a 5×114. 3 bolt pattern and a selection of rim diameters, including 16″, 17″, and 18″, Hyundai Sonata wheels are available.
Are the wheels on Kia and Hyundai the same?
I currently have a Hyundai Kona that I am driving on winter tires that I had previously owned on rims from a Hyundai i30/Elantra GT.
The speedometer will deviate too much if your tire diameter doesn’t stay the same.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
What vehicles have a bolt pattern of 5×115?
Many fantastic cars, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs, and more, come with wheels with a 5×115 bolt pattern. 5×115 wheels may enhance the appearance of any vehicle, whether you’re driving a polished ride that exudes high-end elegance or a traditional American muscle car.
A 4×100 bolt pattern: what is it?
The stud count (four) and bolt circle measurement (one hundred), the notional circle determined by the studs’ centers, make up the 4×100 Bolt Pattern or Pitch Circle Diameter (PCD).
How is a 5×114-3 bolt pattern measured?
Measure the distance between the outside of one stud and the middle of the next (skipping a stud). The figure you see will represent the bolt pattern’s real size. Therefore, if you observe 4 1/2 inches, you have a 5 on 4 1/2 bolt pattern (also 5×4.5 and 5×114.3).
Does 5×114 have the same bolt pattern as 5×4?
The wheels themselves have the exact same bolt pattern even though the numbers are different. You’ll know you’re referring to the same thing if someone tells you that you really need a 5×114. 3 when you’re looking for 5×4. 5 wheels.
How can I tell if new wheels will fit my car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
Which alternative automobile wheels will fit your car?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Can 5×100 bolts be used with 5×114 three?
As shown in the image, 5×114.3 would imply 5 lugs (or holes), and the circle’s diameter would be 114.3 mm. A 5×100 would contain 5 holes as well, but because of the circle’s 14.3 mm lower diameter, the two are incompatible.
Some wheels have 10 holes and are classified as 5×100/5×114.3. The first set of five is 5×100, while the second is 5×114.3. By making one wheel suitable for numerous more cars, this helps the wheel manufacturer save money.
Can I use 16-inch wheels instead of 14-inch ones?
The only factor that matters is YOUR TIRES’ outer diameter. There is no difference if the outside diameter of the 14- and 16-inch tires is the same.