5W-30.
In This Article...
Very High Temperatures
Oils with low “winter weight” viscosities may be necessary for vehicles operated in subfreezing conditions. On the other hand, vehicles operated in regions in the southern and southwestern United States, or in regions with warm climates all year round, may need motor oils with greater viscosities. For the Hyundai Elantra, 10W-30 oil is advised for the vehicle’s best performance in warm weather.
How often should I have my Hyundai Elantra’s oil changed?
Regular oil changes are simple and can increase the lifespan of your vehicle. One of the most crucial fluids in your car is the engine oil. It lubricates engine parts and aids in keeping your engine operating smoothly. Oil loses some of its lubricating qualities while you drive because it degrades and is exposed to impurities. It’s possible that many folks don’t know when to change their oil. Your oil changes should be more often if any of the following apply to your driving:
- frequent short-distance travel. like to and from the shop or the school.
- driving while it is dusty. More often than we know, winds carry dust.
- driving through locations where corrosive compounds, such as salt, are being employed.
- driving during an extended period of high humidity or low temperature
- driving in congested city traffic in temperatures above 90 degrees.
The grade, viscosity, and frequency of oil changes recommended for your vehicle may be found in your owner’s manual. You should also periodically check to make sure the oil level is at the recommended level. Depending on your entire driving history, you might require more frequent engine oil changes (every 4,500-5,000 miles may be more appropriate than the normal 6,000-7,500 miles).
When the manufacturer recommends it, getting an oil change can save you a ton of money and time in the long term. Other advantages are:
- more efficient engine performance
- higher fuel efficiency
- fewer hazardous emissions
- long-lasting of the engine
Finally, creating a regular maintenance schedule for oil changes can act as a guide for when other maintenance requirements should be attended to. Make an appointment for an oil change at your neighborhood Hyundai dealer right away. As your automobile matures, they will provide a free, rapid multi-point inspection and make any necessary corrections. View offers for oil changes from nearby dealers here.
Which kind of oil does Hyundai advise using?
No matter the Lexington weather, 5W-20 to 5W-30 oils have the ideal density to adequately lubricate and safeguard the components of your Hyundai Elantra engine. The 0W-15 or 10W-40 grade motor oil is insufficiently thin or thick to perform the required function.
Hyundais require synthetic oil, right?
While conventional oil only lasts between 3,000 and 5,000 miles before it needs to be replenished, synthetic oil can last up to 10,000 miles before it needs to be changed. We absolutely recommend synthetic oil for the Hyundai Elantra because it offers drivers many more advantages than conventional oil does.
What kind of oil is used by Hyundai dealers?
When Hyundai’s automobiles leave the assembly line, Quaker State is also the company that supplies the original motor oil. Quaker State, a pioneer in consumer automotive goods and vehicle maintenance for more than 80 years, is built on confidence and giving its consumers the best value, just like Hyundai.
Will 5W-30 work in a Hyundai Elantra?
You can select either of the following grades of conventional or synthetic oil for the Hyundai Elantra: 5W-20. 5W-30
What happens if you fill your car with the incorrect oil?
Inadequate lubrication, overheating, and possibly transmission failure can result from using the incorrect fluid. Even after flushing the transmission, a mechanic might not be able to undo the damage. Adding brake fluid or motor oil incorrectly might also ruin your transmission.
What is oil 5w30?
A popular motor oil for light-duty gasoline and diesel engines is 5w30. 5w30 is a multi-grade oil, like the majority of modern motor oils, ranging from a lower viscosity grade of 5 to a higher viscosity grade of 30.
Winter is indicated by the “W,” which stands for that season. The number before the “W” denotes the oil’s viscosity (or thickness) at low temperatures, hence the “W,” while the number after it denotes viscosity at higher temperatures, or when the engine is operating.
Can I replace my Hyundai’s 5W20 with 5W30?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because 5w20 oil was precisely considered when your engine was created, all of the parts that come into contact with it must be a specific viscosity after the engine reaches operating temperature, or 212a.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow considerably more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you use 5w30 oil instead of 5w20 when it is not advised or permitted by your owner’s manual, it could violate the powertrain warranty on your car, impair engine performance, and ultimately harm your engine.
Making sure your engine is protected with the appropriate insurance policy utilizing Jerry will help keep it running at its best. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
Can you combine synthetic and conventional oils?
You’ve come to the proper place if you have a question concerning motor oil, and this is a crucial question. Jiffy Lube knows oil, after all. Every day, hundreds of drivers are assisted by qualified Jiffy Lube experts in choosing the proper motor oil, including whether to use synthetic or conventional oil and whether it is OK to combine different types of motor oil.
So, is it possible to combine synthetic and conventional oil? Yes. Mixing shouldn’t harm your engine if it’s something you do infrequently. To keep you moving until your next regularly planned maintenance check, let’s assume you wish to top off your oil. If the oil you use has the weight (or viscosity) indicated in your owner’s manual, mixing is acceptable.
5W-30 oil is it synthetic?
The #1 High Mileage brand, Castrol(r) GTX(r) High MileageTM 5W-30, is a premium synthetic blend motor oil designed especially for vehicles with over 75,000 miles on them.
What is oil 5W 20?
5W20 Definition The SAE class under which the engine oils were designated is known as 5W20. These multigrade oils have excellent flow characteristics even at subfreezing temperatures. The designation 5W denotes that the oil can withstand winter temperatures of up to -35 °C.
Synthetic oil: Is it better?
Yes, synthetic oil is superior to regular oil for engines. While conventional oil, or mineral oil, can provide enough lubrication, it cannot match the overall engine protection and performance offered by synthetic oils.
When opposed to the less refined base oils used in conventional oils, synthetics use higher grade base oils, making conventional oils:
- Less stable chemically
- easier to oxidize and acidify
- faster to degrade and lose protective properties
In general, full synthetic motor oils outperform traditional and synthetic blend motor oils in terms of engine protection and performance. The sophisticated complete synthetic motor oils from Mobil 1TM are precisely developed with an additive system that offers performance advantages over conventional and synthetic blend oils by:
- preventing sludge and deposit accumulation
- minimizing wear
- safeguarding against extreme temperatures
- preventing oil deterioration
Therefore, all of the chemistry that is developed in a lab has a significant impact on the road.
5W-20 oil is it synthetic?
With Mobil 1 5W-20 advanced full synthetic motor oil, your engine will run like new and be protected for up to 10,000 miles between oil changes while still receiving superior engine protection.
Nothing works better overall than Mobil 1, a motor oil that is a part of many various car models, including a few high-performance ones.
In order to meet or surpass the industry’s strictest standards, Mobil 1 5W-20 motor oil is created with a proprietary blend of high-performance synthetic base stocks strengthened with a carefully calibrated additive component system.
ExxonMobil advises using Mobil 1 5W-20 motor oil in all sorts of contemporary gasoline-powered vehicles, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.
- Cars
- Trucks
- SUVs
- Vans
Compared to our conventional and synthetic blend oils, Mobil 1 5W-20 motor oil performs better. Additionally, the sophisticated full synthetic formula can:
Please review our limited Mobil 1 warranty. The manufacturer’s suggested oil viscosity grade, API service classification, and any builder approval are all listed in your owner’s handbook. For a fast glance at significant manufacturer approvals and details on the zinc and phosphorus contents in Mobil 1 5W-20, you can also consult the Mobil 1TM Product Guide.
Follow the oil life sensor or the suggested oil change schedule in your owner’s manual if your car is still under warranty. To guarantee efficient operation, proper maintenance procedures are necessary, including routinely monitoring the oil level to make sure the right amount of oil is present.
*Protection lasts for a year or 10,000 miles, whichever comes first. Read our Mobil 1 limited warranty for more details.
How long can you run with synthetic oil in between oil changes?
Synthetic oil is more refined than ordinary auto oil, which can cut friction, lessen engine sludge, and improve engine performance. Depending on the vehicle and the brand of synthetic oil used, it is advised that you change the oil every 7,500 to 15,000 miles.
What occurs when I combine 5W20 and 5W30?
It is crucial to understand both oils in order to fully comprehend what happens in the engine when the two oils are combined.
The letter W in the SAE (Society of Automotive Engineers) format of the multi-grade oil designates that both multi-grade oils are acceptable for winter and, consequently, are suited for low temperatures.
The number before the letter denotes viscosity below zero degrees Celsius, while the number after the letter denotes viscosity at one hundred degrees Celsius.
Due to its increased viscosity, the 5W30 multi-grade oil is utilized throughout the summer and in tropical areas as it is more suited to use in hot temperatures.
This does not, however, make using the oil in cold weather unnecessary. However, the 5W20 oil performs better in colder climates.
So what will happen if you combine the two oils? Since the two oils have different viscosities and additives, they won’t completely combine to form a single oil combination.
Your engine might not immediately suffer if you combine the two oils for usage in an emergency.
However, using a combination of both oils in an unsuitable engine could cause serious long-term engine damage, including overheating, sludge buildup, oil leaks, and deposits.
Therefore, it is advised that you flush the oil and replace using the proper engine oil if you must use incompatible oil in an emergency.
What makes 5W30 and 5W20 different from one another?
Think again if you think you can substitute 5w30 for 5w20. Despite the tiny viscosity variation between the two lubricants, they are each designed for a particular engine. A
A thinner oil called 5w20 is made for modern, high-performance engines. However, 5w30 is a thicker oil that is better suited for older engines because it is heavier. Your engine’s performance and wear and tear could be hampered by using the incorrect oil. A