What Is Hyundai Homelink?

Hyundai / By

HomeLink(r) is, to put it simply, an in-car garage door opener that enables you to do away with your remote control. Our HomeLink(r) setup instructions can help you get started using this function right away if you recently bought a new or used Hyundai.

Owners of Hyundai, Begin Here

Trying to set up your Hyundai’s HomeLink? The steps you must take to quickly and easily train your HomeLink are explained in the video on the right side of the page. The most frequently required video will start playing immediately, however we have added manufacturer-specific movies below the main player for some garage door openers.

Not a fan of video? By selecting your vehicle’s model name from the list below, you may also get comprehensive instructions tailored to your particular model.

Choose your training films from the list below the main video for Hyundai owners who are using a Genie, Sommer, or an older model of HomeLink (model years 2008 and earlier).

Hyundai HomeLink Initial Setup Instructions

The initial steps are the same whether your garage door operates with fixed code or rolling code. We advise having a step ladder on ready if you have a rolling code opener or are unsure of the type of garage door you have.

  • The HomeLink buttons should be held between 1-3 inches of the garage door remote.
  • Press and hold both the HomeLink button you want to configure and the open/close button on your garage door remote at the same time.
  • When the HomeLink indicator light flashes, hold both buttons.
  • A solid or quick flash will occur on the HomeLink indicator light.

Depending on what the HomeLink indicator light performs, move on to the correct area below.

The Hyundai HomeLink: How Do I Use It?

Press and hold the HomeLink(r) garage door button on your Hyundai rearview mirror while simultaneously pressing and holding the garage door button on your garage door remote control inside your Hyundai car. Hold down the button while waiting for the red light in your rearview mirror to solidify or start flashing quickly.

How does a HomeLink function in a vehicle?

The most commonly regarded and utilized vehicle-based wireless control system in the world is HomeLink(r). You may use it to conveniently and safely open and close your front gate and garage door, turn on and off your house’s security system, and control the lighting, appliances, and gadgets both inside and outside your home. All from three buttons that were cleverly incorporated into the cabin of your car.

When the automobile is off, does HomeLink function?

When the car is completely off and in park, I discovered that the Homelink in the mirror still functions.

Given that someone can use the Homelink mirror to open my garage doors if the car is accidently left unlocked or a window is broken, this is a very severe security concern.

It would have been so easy to limit Homelink’s activation to key fob proximity or on-vehicle operation.

How does HomeLink garage door work?

Simple to Program: HomeLink(r)’s Quicktrain technology, available in some cars since 2007, finds and syncs with the code of the original transmitter. Programming is straightforward and quick even without Quicktrain.

Convenient: HomeLink is constantly present and prepared to act on your direction. No more looking around for the garage door remote.

Versatile: Regulates property gates, garage doors, interior and outdoor lighting, alarm systems, and more.

Battery-free: HomeLink never needs batteries because it is powered by the electrical system in your car.

Is HomeLink a monthly service?

You must register and pay the requisite subscription cost in order to join HomeLink. Exception: Only new members are eligible for the Free Trial membership, which requires no payment for a set amount of time. All subscription costs are not transferable or refundable.

Exists a HomeLink mobile app?

Install the App Now that HomeLink Connect(r) is available for iOS and Android, you can conveniently control all of your car-to-home automation devices from the front seat.

Does HomeLink have a price?

The HomeLink automated garage opener will no longer be included as a standard feature in the Model 3 premium interior, Tesla has informed its sales personnel today.

All Tesla vehicles have long come with Homelink, a well-known wireless control technology that uses a vehicle to unlock garage doors automatically.

“HomeLink will no longer be available on Model 3 Premium interior vehicles in North America as of right now. All Model 3 vehicles will no longer include HomeLink as a result of this change. Customers of the Model 3 who want to upgrade to HomeLink can do so on our Tesla shop page. This upgrade needs to be installed by service after purchase.”

On its shop website, the manufacturer is currently selling HomeLink as an aftermarket item for $300:

On their website, Tesla describes the item as follows:

“Easy access to come and go. With the fully integrated Homelink module, you may connect Model 3 to your garage door, gate system, and other radio frequency (RF) controlled equipment.”

The $300 price tag, according to the company, includes both delivery and installation at Tesla Service Centers.

Can HomeLink be installed without a remote?

Try pressing the preprogrammed button to see if your garage door opens and closes. If it does, your effort has been fruitful. In the event that it doesn’t, repeat the process.

You may move a few little switches around to create any passcode you like. It should be comparable to the password on your phone. You won’t replace it unless you decide it’s no longer secure, at which point it will stay the same.

Note: If you have an earlier HomeLink garage door opener, there are no instructions for configuring it without a remote. In the HomeLink system, a code cannot be manually set. You need to utilize a remote to program it.

Most of the steps are the same. Make sure the door is shut, the key is not in the ignition, and any outdated programming is cleared away.

  • Simply push both the remote button and the HomeLink button you wish to program while holding the remote up to the HomeLink button.
  • Hold them until you notice the in-car remote’s LED starting to flash quickly.

Where is the transmit button for HomeLink?

Your HomeLink buttons are normally found in the overhead console, center stack, or mirror of your car, but their exact location depends on the make, model, and year of your vehicle. Please consult your owner’s manual if you are unsure of where your HomeLink is.

The operation of the HomeLink garage door opener.

How is HomeLink put to use? HomeLink is able to learn the codes of your original remote control through a straightforward programming procedure. Gentex has designed HomeLink to operate systems that employ either standard or rolling codes, working closely with producers of automatic door opening systems and radio equipment.

What electronics work with HomeLink?

  • Thermostats. ecobee 3 Lite. ecobee 3.
  • Locks on doors Smart Lock for August.
  • Lighting. Z-Wave color LED bulb by Aeotec.
  • Dimmers. GE In-Wall Smart Dimmer with Z-Wave.
  • Switches. In-Wall On/Off Switch for Centralite.
  • GE Plugin Smart Switch. Outlets.
  • Garage door openers powered by the cloud. Aladdin Genie Connect
  • Robots for the home: iRobot Braava jet(r) m6

Does HomeLink trigger an automatic garage door opener?

can be retrofitted for Model 3 and Model Y and installed. Your Tesla can connect to up to three radio-frequency-controlled gadgets via Homelink.

Is Bluetooth used by HomeLink?

The most popular and reliable car-to-home automation solution is HomeLink. It comprises of programmable buttons built into vehicles that may control a variety of home automation appliances, such as garage doors, thermostats, home lighting, and more, via RF and/or cloud-based wireless control.

A home automation aggregator software called HomeLink Connect gives users access to a growing number of cloud-based home automation services. Both iOS and Android devices can use it.

A more connected smart house is being developed by the IoT startup Yonomi. For businesses and individuals wishing to create delightful experiences in their homes, they build cloud-based technology.

Mirrors with Bluetooth functionality (marked by a Bluetooth emblem) and HomeLink Connect-capable automobiles are both compatible with the HomeLink Connect app.

A VOXX aftermarket distributor sells Bluetooth-enabled mirrors in the aftermarket. Shop online at VOXX Electronics. Future cars will have mirrors with Bluetooth capabilities.

My HomeLink button is red; why is that?

When you press it again, the light ought to be red. This indicates that your 3-button remote is now prepared for HomeLink(r) system programming.

Without a remote, how can I program my garage door opener to my car?

When you click the button on the control box, the indicator light can occasionally blink rather than turn on and stay on. This indicates that it is still programming itself. Find the “learn,” “program,” or “smart” button on the control panel inside your garage. Then press that button before returning to the automobile. You have around 30 seconds to complete this action before you have to start over.

Re-enter the vehicle and hit the newly programmed replacement button. Hold it down for a couple of seconds. In response, the garage door ought to move open or shut. When you return to the main control panel, press the “learn” button. When you get back to the car, press the preset button if the door still won’t move. It can take a few tries for this to sink in.

How do I install my car’s garage door opener?

Without a remote, the procedure for connecting your garage door opener to your car is quite identical to that described above, with a few minor exceptions:

  • Find your car’s control panel for the garage door opener first. In the majority of car types, it can be found above the driver’s seat or anywhere close to the other main control buttons.
  • Your control panel most likely has a few distinct buttons, as mentioned. One of them may have the word “program” or a similar designation on it.
  • If your panel has a “program” (or comparable) button, push and hold it for a short period of time until a light flashes, or do as your car’s owner’s manual instructs.
  • Once the remote has been keyed, it should be prepared to receive a fresh keycode command or to automatically connect to a garage door opener nearby.
  • Make sure your automobile is parked in your garage so that your opener can connect to the appropriate garage door panel.
  • In some cases, in addition to or even concurrently with the aforementioned steps, you might also need to press the program button on the garage door opener’s control box in order to create a connection. Again, for more information on additional programming techniques, we advise that you review the manuals for both your car and your garage door opener.
  • Allow the buttons to rest for a short while after setting a new keycode or connecting the control panel to your garage door opener.
  • Test your program by pressing the remote button and attempting to open the garage after a brief interval.

How can I set up my mirror to work with my garage door opener?

  • On the rearview mirror, press the HomeLink button.
  • Hold the rearview mirror 2 to 3 inches away from the garage door opener.
  • The Open Button Must Be Pressed and Held Until a Green Flashing Light Appearance.
  • When the light stops flashing, press the HomeLink button to test it.