Engine replacement: 1. If DTC P1326 is found and a signal interference inspection of the wiring is positive. Replace the Sub Engine Assembly if an engine replacement is necessary (long block).
In This Article...
P1326 in the Hyundai Sonata: Symptoms, Causes, and Diagnosis
P1326 is a Hyundai Sonata error code that is frequently seen. It means that excessive engine vibration has been discovered by the knock sensor detection system. The most frequent cause is an actual engine knock, although other typical culprits include faulty knock sensors and wiring issues.
Given that P1326 suggests your Sonata may be suffering from severe engine damage, repair should be given first priority.
Answers
The P1326 error code denotes knocking or vibration brought on by excessive rod wear. Fortunately, you
The drivetrain is covered by a 10-year, 100,000-mile warranty; schedule an appointment at
What does the Hyundai Santa Fe Sport P1326 code mean?
The Hyundai Santa Fe Sport’s P1326 error code indicates a problem with the vehicle’s connecting rod bearings. It is very likely that the bearings are no longer effective as a result of wear and tear and are producing excessive vibration that could harm the engine. In order to prevent engine damage from ongoing bearing wear and strain, make sure to have the car inspected by a specialist as soon as you can. Watch out for any further red flags as well. It is important to take this error code seriously to prevent any consequent secondary issues. You can incur additional costs if the engine is not replaced or serviced right away.
Hyundai Sonata P1326 – How to Fix It?
P1326 indicates that the KSDS detected a knock, which is typical of the bearing wear problem. As a result, make sure the oil is at the recommended level before driving or attempting to take the vehicle to the dealership, where you will receive a new engine and a free loaner vehicle. In a few weeks, the engine will be ready.
What does HyundaiSonata code P1326 mean is another common question. The Hyundai Santa Fe Sport’s P1326 error code indicates that the car’s connecting rod bearings aren’t functioning properly. In order to prevent engine damage from ongoing bearing wear and strain, make sure to have the car inspected by a specialist as soon as you can.
Know what error code P1326 means as well. The P1326 error was discovered: Vibrations that signal the start of excessive connecting rod bearing wear are picked up by the KSDS. It is intended to warn the driver of bearing wear at an early stage before significant engine damage, including engine failure, takes place.
What is a knock sensor update, furthermore? New Software for the Knock Sensor Detection System The device continuously scans for signs that could indicate an impending engine breakdown using software improvements and current engine sensors. Hyundai and Kia dealers are providing free installation for all the automobiles covered by the settlement.
Can you drive with a damaged knock sensor, too? In a nutshell, the answer is that you can operate a vehicle with a malfunctioning knock sensor. However, you might not want to. Long-term operation of a vehicle with a malfunctioning knock sensor can seriously harm the engine.
How is code P1326 fixed?
Replace the knock sensor if you discover an open or short circuit while doing this test. Check for a spark at each plug wire and coil pack if the PCM displays the error code P1326. While starting the engine, check the fuel pressure and injector pulse waveform as well.
With a P1326 code, can you drive?
Last week, though, it initially made a knocking noise before losing the majority of its acceleration. I can put it to the floor and it bogs out when I apply the gas. The problem persists after new air and oil and inspection of the spark plugs.
Now, the oil was practically empty when I tested it, but it had only been empty for three days. I’m about to check the knock sensor. Any further recommendations?
P1326 is caused by a knock that the KSDS detected and is typical of a bearing wear issue, therefore make sure the oil is full and drive it.
The engine will cap out at 2000 rpm at most if you try to drive it to the stealership; in that case, you’ll get a new engine and a free loaner vehicle.
Get it towed the remaining distance if it seizes on the way to the hospital; it will be a no-brainer and the vehicle will have a new engine.
Are Hyundai Sonata engines being recalled?
The issue: Gasoline leaks from the fuel pipe may not be stopped by heat-resistant tape that was added during a previous recall, increasing the possibility of a fire.
The remedy: Free of charge to the car owner, Hyundai stores will replace the low-pressure gasoline hose.
Owners of impacted vehicles should call Hyundai at 855-371-9460 to get in touch with the manufacturer. As of July 5, 2022, Hyundai will send them a letter informing them.
22V312 is the NHTSA campaign number. These exact vehicles have already undergone recall 20V121 repairs. The recall number for Hyundai is 227.
To see if your car is still subject to a recall, check: You may find out whether there are any open recalls for your car on the NHTSA website.
If you enter the 17-digit VIN of your automobile onto the NHTSA website and a recall doesn’t show up, your car doesn’t currently have one. We advise frequent checking because recalls are frequently issued by automakers and involve a large number of older vehicles.
How much does a Hyundai Sonata knock sensor cost?
Hyundai Sonata knock sensor replacements typically cost between $188 and $213. The cost of labor is expected to be between $93 and $118, while the cost of parts is between $94 and $96.
What does the Hyundai Sonata’s engine light that is flashing mean?
Usually, a serious engine misfire that causes unburned fuel to escape into the exhaust system is indicated by this blinking light. There, it has the potential to swiftly elevate the catalytic converter’s temperature to the point where damage is possible, necessitating an expensive repair.
Does Hyundai offer a knock sensor warranty?
As part of the settlement of an ongoing class action lawsuit, Hyundai will offer a lifetime guarantee for some of these cars. The knock sensor campaign must be carried out in order to be eligible for the lifetime guarantee.
Can my Hyundai be driven with the check engine light on?
A constant glow normally denotes something less serious, but a check engine light that flashes suggests your car’s engine is seriously damaged and needs quick repair. We strongly advise avoid driving your Hyundai if the check engine light is flashing, and book Hyundai servicing right away.
A knock sensor code is caused by what?
The knock sensor unit or its circuit has been detected as having a fault by your car’s computer, according to code P0325. The knock sensor picks up vibrations caused by spark knock, an aberrant form of combustion. Depending on the make and model, an automobile may feature one or two knock sensors.
Knock sensor code may be caused by low oil.
Low oil pressure won’t harm the knock sensor, but it can cause a fault code to be set on the sensor. A knock sensor can set a code if the engine is noisy for any reason and does not respond to lowered timing.
What does the engine knock sensor do?
When the air-fuel mixture self-ignites too quickly, it causes a knocking. The cylinder head gasket and cylinder head are most hurt by persistent knocking. The knock sensor sends a signal to the ECU after detecting the high-frequency engine vibrations that are indicative of knocking. By commencing ignition as soon as feasible, the goal is to produce the most energy possible. Engines using knock sensors can use less fuel and produce more torque.
Where is the knock sensor?
The engine block’s exterior houses the knock sensor. In order to avoid engine damage, it is designed to record knocking noise in all engine operating conditions.
The engine block vibrations carried by the structure are “heard” by the knock sensor, which transforms them into electrical voltage signals. In the control unit, the signals are filtered and assessed. The associated cylinder receives the knocking signal. If knocking happens, the ignition signal is moved in the “late” direction for the corresponding cylinder until knocking combustion is eliminated.
Is it safe to operate my automobile while the check engine light is on?
As a general rule, you shouldn’t continue to drive if your check engine light is blinking. It is a crisis. It frequently signifies an engine misfire.
The (expensive) catalytic converter will likely sustain the most of the irreparable damage if you continue to drive.
Have your automobile transported to a reputable technician so you don’t risk that expense.
What signs might point to a defective knock sensor?
SYMPTOMS OF A FAULTY KNOCK SENSOR Engine warning lamp illuminates. Error codes are kept. diminished engine power increased use of gasoline
What occurs if the knock sensor is not replaced?
The engine’s knock sensor is designed to identify any typical pre-ignition (pining) noise. In order to prevent the engine from pinging, the computer can advance the ignition timing as far as it can. You get the best engine power and fuel efficiency from doing this.
The engine could start pinging without the computer being able to notice it if the knock sensor is not functioning. The combustion process may burn or blow holes in the pistons as a result of this pinging.
A knock sensor may continue to detect a knock if an engine has a rod or piston knock issue, and the computer will keep reducing the ignition timing until a predetermined limit is reached and then set a code for the knock sensor. Check the engine for any internal issues that could be the source of the knock sensor code.
If the knock sensor is found to be defective through testing, the engine may have decreased power, decreased fuel efficiency, and hesitations if it is not replaced. Consider YourMechanic if you require assistance with the sensor replacement or with resolving any of these issues because one of our mobile mechanics can visit you to service and diagnose your car.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Does changing the knock sensor make sense?
Although you can technically drive with a damaged knock sensor, you won’t go very far and will burn a lot of gas because of how much your motor depends on it.
It is crucial that you replace the knock sensor when it malfunctions. This is due to the fact that using your motor while it has a damaged knock sensor is unsafe and, in some circumstances, could prevent you from discovering a catastrophic engine breakdown in time. You now own a totaled vehicle.
How long may a damaged knock sensor be used while driving?
Today’s cars have two knock sensors in their engines, and if one of them fails, you can still drive for a few hundred miles without even realizing it. As long as the other one doesn’t burn out too quickly, it won’t have any impact on how well your car performs.
But as soon as both knock sensors stop working, your acceleration will become poor, and your engine will idle rough. When this occurs, we firmly advise taking urgent action to remedy the issue.
How frequently should a knock sensor be replaced?
Unless there is a sensor issue, knock sensors usually don’t need to be replaced until about 150,000 miles.
- An illuminated check engine light
- The engine is making knocking noises.
- Your acceleration decreasing
- lower engine power
- decreasing fuel efficiency
Driving while having a damaged knock sensor is it safe?
In conclusion, if you want to wreck your engine and obtain terrible performance from your automobile, you can drive with a defective knock sensor. It would be good to replace your knock sensor as soon as you determine that it has seen better days with a high-quality replacement.