A Hyundai tire pressure monitoring system, often known as a Hyundai TPMS, is an electronic device that checks the tire pressure in a vehicle and immediately alerts the driver if the pressure is too low or too high. You may follow the Hyundai Sonata TPMS Tool Process using this media file.
In This Article...
Emergency procedures and tire pressure monitoring systems (TPMS)
chilled and inflated to the manufacturer’s suggested inflation pressure
on the tire inflation pressure label or vehicle placard. (If you have tires on your car
not as specified on the vehicle placard or tire inflation, or both, of the size indicated
based on the recommended tire inflation pressure listed on the pressure label.
Your tires’ air pressure is seriously low on one or more of them. hence, when the low
When the tire pressure indicator lights up, you should immediately stop and examine your tires.
and fill them with the correct amount of pressure. Taking a much longer
A tire that is under-inflated overheats and may eventually fail. Under-inflation
also decreases tire tread life and fuel efficiency, which could impact how well a vehicle handles.
Even if the tires are underinflated, it is the driver’s obligation to maintain the recommended tire pressure.
A TPMS malfunction indication has also been installed in your car to let you know when it
when the system isn’t functioning correctly. Combining the TPMS malfunction indicator
The telltale will flash for about a minute before staying on all the time.
When the vehicle starts up again, this process will keep happening as long as the problem
exists. The system may not function properly while the malfunction indicator is illuminated.
to correctly detect or alert low tire pressure. The reasons for TPMS issues include
a number of factors, such as the installation of substitute or additional tires.
or wheels on the car that stop the TPMS from working correctly. Always
on your car to make sure the new or different tires and wheels allow
When the ignition switch is turned on, if the TPMS indicator does not glow for three seconds,
if the engine is running, the switch is in the ON position, or if they remain lit.
Take your automobile to the nearest authorized repair shop after the light has been on for about three seconds.
Answers
My 2010 Sonata has TWO different graphical warning symbols for low tire pressure: one is a cross-section of a tire with an exclamation point in it, and the other is a text warning that reads “TPMS” that illuminates if communication between the wheel pressure sensor and the car is lost. Therefore, on mine, if the TPMS in text is illuminated, it may still be safe to drive even though the tire pressure may not be low. Just be sure to check the tires frequently, pay attention to how the car handles, and take it to a repair to have it serviced.
It implies that a sensor is malfunctioning. In order to examine your tires, you will have to do it the old-fashioned way: by looking. till the sensor is fixed. My Sonata is a 2008 model.
The issue is the same for us. Four sensors total have been replaced thus far, and a week after the final sensor was changed, the light turned back on. Considering how inexpensive you may get the part, all work has been done at a Hyundai dealer for a significant amount.
How To Reset The Tire Pressure Sensor On A Hyundai Sonata
Your Hyundai Sonata’s tire pressure monitoring light turning on indicates that one or more tires are either under- or over-inflated. To keep you safe while driving on the road and to prevent any damage to your tires, car tires must be filled to a specified PSI.
A Hyundai Sonata should have a PSI of 34. The tire pressure light on your car’s dashboard will turn on if the tire pressure monitoring system determines that the tire pressure is either too high or too low. The tire pressure sensor needs to be reset after your tires have been inflated to the recommended PSI.
If you don’t know how to reset the tire pressure sensor on a Hyundai Sonata, this page contains all the instructions you require. For detailed instructions on how to reset the TPMS on every Hyundai Sonata model from 2007 through 2020, keep reading.
How does TPMS function?
When the vehicle is turned on, the tire pressure monitoring system (TPMS) control module will continuously receive data from the tire pressure monitoring sensors. The TPMS control module in the majority of vehicles serves merely to turn on the TPMS warning light when a tire is either under- or over-inflated. The air stems in the tire feature sensors that automatically modify their output signal in response to changes in tire pressure.
What does the Hyundai Sonata check TPMS mean?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, lower fuel economy, excessive heat buildup, and tire overload. The shoulders or tread edges of a tire that is underinflated will prematurely wear out on both sides.
Finding the TPMS indicator on your dashboard is straightforward if this is your first time hearing about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
On a Hyundai Sonata, how do you turn off the TPMS light?
Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the engine and give the sensor 20 minutes to refresh. Under the steering wheel is typically where you’ll find the TPMS reset button.
In what location is the TPMS sensor?
Where is the location of the tire pressure sensor? It is affixed to the interior of the rim from inside the tire. The tire pressure sensor is a little cylinder that you can see if you take the tire off the rim.
Is TPMS on the tire or rim?
When the air pressure within the tire lowers, your car’s tire pressure monitoring system (TPMS) will sound an alarm and notify the driver. This is an electronic system that links the monitor on the dashboard of the car with the sensor that is mounted on the rim to display whether the tires are adequately inflated or not.
The TPMS will alert the driver with a flat tire warning light if the tire starts to lose air pressure. This indicates that the tire’s proper inflation level is not being maintained for whatever reason; whether as a result of tire or valve damage, the tire will need to be reinflated and repaired.
These sensors make sure the tires don’t deflate to dangerously low levels, which, if one is not careful, could further harm the tire, the rim, and even the TMPS unit. Due to this, they have been a necessary component of automobile production in the US since 2008.
The service life of tires will be shortened by rapid tread wear caused by improper tire inflation. Lower inflation extends their footprint, endangering their ability to drive safely and increasing pressure buildup while they perform, which will destroy their ability to use gasoline efficiently. The tires’ wet weather performance will also suffer from the broader footprint, which will also lengthen the distance between stops. In other words, it will harm the car’s performance and safety when driving.
What distinguishes TPMS from low tire pressure?
How do the TPMS light and the tire pressure light differ from one another? They both mean the same thing, right? Actually, not quite.
The low-pressure tire indicator might be compared to a low fuel indicator for your tires. If this indicator flashes, you must immediately fill your tires. The TPMS light, on the other hand, displays the pressure in each tire and could not alert you to an issue that demands your urgent attention.
Driving safely or maybe getting into a dangerous accident depends on knowing the difference between these two markers. To help you understand what the TPMS light and tire pressure light on cars imply when they start blinking, we’re going to look at some of those differences and share with you our own personal experiences with them.
Our professionals have years of experience fixing a variety of auto issues. This includes tire problems and guiding perplexed drivers toward understanding the significance of these and other dashboard signs.
Can you change the TPMS on your own?
The Tire Pressure Monitoring System, which notifies you when a tire is dangerously low on air, typically uses TPMS sensors embedded in the tires to detect low tire pressure. The majority of TPMS sensors use internal batteries that cannot be changed to power them.
The lithium ion batteries in a TPMS sensor have a lifespan of 5 to 10 years. The duration of the TPMS sensor batteries is difficult to predict because it depends on how many radio frequency broadcasts the sensors send out. The amount of driving you perform over time and the conditions you drive in will affect the sensor battery life. The TPMS battery life is less affected by cold conditions than by warmer ones. When compared to continuous pace, stop-and-go traffic has a greater effect on TPMS battery life. This is due to the fact that sensors send out more radio frequency broadcasts as a vehicle changes its speed.
The system will issue a malfunction warning when a TPMS sensor’s battery runs out, which will be visible as a blinking TPMS light on your dashboard. After 60 to 90 seconds, the light may either continue to flash or turn solid. Be a repair appointment as soon as you can if you receive this warning, but also check the tire pressure in each tire right away to make sure you have safe inflation all around.
You can change each individual TPMS sensor separately if one of them malfunctions and needs to be replaced. The other sensors, on the other hand, are probably on the verge of failing as well if the failure was brought on by a dead sensor battery. You might wish to proactively replace all the sensors so you have brand-new sensor batteries all around when you take into account the time and hassle of taking your car off for a sensor replacement.
What occurs if TPMS sensors are not replaced?
Customers who ask you to turn off their TPMS light just and leave the underlying problem unattended can put you and your business at unnecessary risk. Without addressing the problem, you are breaking the NHTSA’s “make inoperative” clause, which makes shops legally obligated to disable the TPMS. It is your duty to let the customer know this and to decline service if they don’t want the problem handled properly.
It is strongly advised to replace all sensors at once if a single sensor has reached the end of its useful life. When one sensor fails, the others are likely to follow suit quickly, just like with headlights. The same holds true for replacing an impact sensor or damaged valve stem. Your consumers should be aware of this since it will assist you give their vehicle the finest care possible. They also find it convenient.
The TPMS sensors must always be reactivated and calibrated for drivers who change their tires as the seasons change. If you don’t do this, the car’s TPMS won’t function properly and could turn on the TPMS light.