The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, lower fuel economy, excessive heat buildup, and tire overload. The shoulders or tread edges of a tire that is underinflated will prematurely wear out on both sides.
Finding the TPMS indicator on your dashboard is straightforward if this is your first time hearing about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
In This Article...
What does the Hyundai Elantra’s TPMs light mean?
Your Hyundai Elantra’s TPMS light turning on indicates that one of the tires has low pressure. Tire pressure monitoring system is referred to as TPMS. When this light illuminates, you should inspect each tire to make sure there are no noticeable holes, screws, or nails in them. Then, as instructed on the sticker on the driver’s door jamb, you should inflate the tires to the recommended PSI. Pressing and holding the TPMS button on the dash will reset the system and turn off the light after all the tires have been inflated. To avoid uneven tire wear, it’s crucial to maintain your tires inflated.
The tire pressure monitoring system (TPMS) light on a Hyundai Elantra indicates that one of the tires has low air pressure.
Emergency procedures and tire pressure monitoring systems (TPMS)
chilled and inflated to the manufacturer’s suggested inflation pressure
on the tire inflation pressure label or vehicle placard. (If you have tires on your car
not as specified on the vehicle placard or tire inflation, or both, of the size indicated
based on the recommended tire inflation pressure listed on the pressure label.
Your tires’ air pressure is seriously low on one or more of them. hence, when the low
When the tire pressure indicator lights up, you should immediately stop and examine your tires.
and fill them with the correct amount of pressure. Taking a much longer
A tire that is under-inflated overheats and may eventually fail. Under-inflation
also decreases tire tread life and fuel efficiency, which could impact how well a vehicle handles.
Even if the tires are underinflated, it is the driver’s obligation to maintain the recommended tire pressure.
A TPMS malfunction indication has also been installed in your car to let you know when it
when the system isn’t functioning correctly. Combining the TPMS malfunction indicator
The telltale will flash for about a minute before staying on all the time.
When the vehicle starts up again, this process will keep happening as long as the problem
exists. The system may not function properly while the malfunction indicator is illuminated.
to correctly detect or alert low tire pressure. The reasons for TPMS issues include
a number of factors, such as the installation of substitute or additional tires.
or wheels on the car that stop the TPMS from working correctly. Always
on your car to make sure the new or different tires and wheels allow
When the ignition switch is turned on, if the TPMS indicator does not glow for three seconds,
if the engine is running, the switch is in the ON position, or if they remain lit.
Take your automobile to the nearest authorized repair shop after the light has been on for about three seconds.
Answers
My 2010 Sonata has TWO different graphical warning symbols for low tire pressure: one is a cross-section of a tire with an exclamation point in it, and the other is a text warning that reads “TPMS” that illuminates if communication between the wheel pressure sensor and the car is lost. Therefore, on mine, if the TPMS in text is illuminated, it may still be safe to drive even though the tire pressure may not be low. Just be sure to check the tires frequently, pay attention to how the car handles, and take it to a repair to have it serviced.
It implies that a sensor is malfunctioning. In order to examine your tires, you will have to do it the old-fashioned way: by looking. till the sensor is fixed. My Sonata is a 2008 model.
The issue is the same for us. Four sensors total have been replaced thus far, and a week after the final sensor was changed, the light turned back on. Considering how inexpensive you may get the part, all work has been done at a Hyundai dealer for a significant amount.
What does TPMS Light mean?
A sort of sensor system called a tire pressure monitoring system, or TPMS, in your car helps you identify when one or more of your tires are either overinflated or underinflated. In terms of the kinds of sensors employed, automakers have a few alternatives, but the overall goal is the same regardless.
One of those great warning lights that occasionally illuminates your car’s gauge cluster and makes your day miserable is the TPMS light. The good news is that the TPMS light doesn’t necessarily require a visit to the technician, unlike other, more dangerous warning lights.
How do you reset the Hyundai TPMS?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
Is my car safe to drive with the TPMS light on?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
In what location is the TPMS sensor?
The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim.
Is TPMS on the tire or rim?
When the air pressure within the tire lowers, your car’s tire pressure monitoring system (TPMS) will sound an alarm and notify the driver. This is an electronic system that links the monitor on the dashboard of the car with the sensor that is mounted on the rim to display whether the tires are adequately inflated or not.
The TPMS will alert the driver with a flat tire warning light if the tire starts to lose air pressure. This indicates that the tire’s proper inflation level is not being maintained for whatever reason; whether as a result of tire or valve damage, the tire will need to be reinflated and repaired.
These sensors make sure the tires don’t deflate to dangerously low levels, which, if one is not careful, could further harm the tire, the rim, and even the TMPS unit. Due to this, they have been a necessary component of automobile production in the US since 2008.
The service life of tires will be shortened by rapid tread wear caused by improper tire inflation. Lower inflation extends their footprint, endangering their ability to drive safely and increasing pressure buildup while they perform, which will destroy their ability to use gasoline efficiently. The tires’ wet weather performance will also suffer from the broader footprint, which will also lengthen the distance between stops. In other words, it will harm the car’s performance and safety when driving.
What distinguishes TPMS from low tire pressure?
How do the TPMS light and the tire pressure light differ from one another? They both mean the same thing, right? Actually, not quite.
The low-pressure tire indicator might be compared to a low fuel indicator for your tires. If this indicator flashes, you must immediately fill your tires. The TPMS light, on the other hand, displays the pressure in each tire and could not alert you to an issue that demands your urgent attention.
Driving safely or maybe getting into a dangerous accident depends on knowing the difference between these two markers. To help you understand what the TPMS light and tire pressure light on cars imply when they start blinking, we’re going to look at some of those differences and share with you our own personal experiences with them.
Our professionals have years of experience fixing a variety of auto issues. This includes tire problems and guiding perplexed drivers toward understanding the significance of these and other dashboard signs.
What occurs if TPMS sensors are not replaced?
Customers who ask you to turn off their TPMS light just and leave the underlying problem unattended can put you and your business at unnecessary risk. Without addressing the problem, you are breaking the NHTSA’s “make inoperative” clause, which makes shops legally obligated to disable the TPMS. It is your duty to let the customer know this and to decline service if they don’t want the problem handled properly.
It is strongly advised to replace all sensors at once if a single sensor has reached the end of its useful life. When one sensor fails, the others are likely to follow suit quickly, just like with headlights. The same holds true for replacing an impact sensor or damaged valve stem. Your consumers should be aware of this since it will assist you give their vehicle the finest care possible. They also find it convenient.
The TPMS sensors must always be reactivated and calibrated for drivers who change their tires as the seasons change. If you don’t do this, the car’s TPMS won’t function properly and could turn on the TPMS light.
Can the TPMS activate the check engine light?
Your automobile, truck, or SUV’s check engine light could turn on for a plethora of different causes. The light may turn on due to a broken sensor, low tire pressure, low transmission fluid, and many other things. However, some of the more frequent causes for the check engine light to appear. When the light lights, it doesn’t always indicate an expensive repair; in certain cases, the problem can be resolved with a simple wrist movement. Here are four typical causes of the check engine light, and for an accurate diagnosis, make sure to take your car to your neighborhood mechanic.
The TPMS button is not present.
Under the steering wheel is typically where you’ll find the TPMS reset button. Consult the owner’s manual for your car if you can’t find it. All tires should be inflated to the recommended pressure, then completely deflated.
Why are my tires fine but my TPMS light is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.