The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, lower fuel economy, excessive heat buildup, and tire overload. The shoulders or tread edges of a tire that is underinflated will prematurely wear out on both sides.
Finding the TPMS indicator on your dashboard is straightforward if this is your first time hearing about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
In This Article...
Answers
My 2010 Sonata has TWO different graphical warning symbols for low tire pressure: one is a cross-section of a tire with an exclamation point in it, and the other is a text warning that reads “TPMS” that illuminates if communication between the wheel pressure sensor and the car is lost. Therefore, on mine, if the TPMS in text is illuminated, it may still be safe to drive even though the tire pressure may not be low. Just be sure to check the tires frequently, pay attention to how the car handles, and take it to a repair to have it serviced.
It implies that a sensor is malfunctioning. In order to examine your tires, you will have to do it the old-fashioned way: by looking. till the sensor is fixed. My Sonata is a 2008 model.
The issue is the same for us. Four sensors total have been replaced thus far, and a week after the final sensor was changed, the light turned back on. Considering how inexpensive you may get the part, all work has been done at a Hyundai dealer for a significant amount.
How To Reset The Tire Pressure Sensor On A Hyundai Sonata
Your Hyundai Sonata’s tire pressure monitoring light turning on indicates that one or more tires are either under- or over-inflated. To keep you safe while driving on the road and to prevent any damage to your tires, car tires must be filled to a specified PSI.
A Hyundai Sonata should have a PSI of 34. The tire pressure light on your car’s dashboard will turn on if the tire pressure monitoring system determines that the tire pressure is either too high or too low. The tire pressure sensor needs to be reset after your tires have been inflated to the recommended PSI.
If you don’t know how to reset the tire pressure sensor on a Hyundai Sonata, this page contains all the instructions you require. For detailed instructions on how to reset the TPMS on every Hyundai Sonata model from 2007 through 2020, keep reading.
Emergency procedures and tire pressure monitoring systems (TPMS)
chilled and inflated to the manufacturer’s suggested inflation pressure
on the tire inflation pressure label or vehicle placard. (If you have tires on your car
not as specified on the vehicle placard or tire inflation, or both, of the size indicated
based on the recommended tire inflation pressure listed on the pressure label.
Your tires’ air pressure is seriously low on one or more of them. hence, when the low
When the tire pressure indicator lights up, you should immediately stop and examine your tires.
and fill them with the correct amount of pressure. Taking a much longer
A tire that is under-inflated overheats and may eventually fail. Under-inflation
also decreases tire tread life and fuel efficiency, which could impact how well a vehicle handles.
Even if the tires are underinflated, it is the driver’s obligation to maintain the recommended tire pressure.
A TPMS malfunction indication has also been installed in your car to let you know when it
when the system isn’t functioning correctly. Combining the TPMS malfunction indicator
The telltale will flash for about a minute before staying on all the time.
When the vehicle starts up again, this process will keep happening as long as the problem
exists. The system may not function properly while the malfunction indicator is illuminated.
to correctly detect or alert low tire pressure. The reasons for TPMS issues include
a number of factors, such as the installation of substitute or additional tires.
or wheels on the car that stop the TPMS from working correctly. Always
on your car to make sure the new or different tires and wheels allow
When the ignition switch is turned on, if the TPMS indicator does not glow for three seconds,
if the engine is running, the switch is in the ON position, or if they remain lit.
Take your automobile to the nearest authorized repair shop after the light has been on for about three seconds.
On a Hyundai Sonata, how do you turn off the TPMS light?
Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the engine and give the sensor 20 minutes to refresh. Under the steering wheel is typically where you’ll find the TPMS reset button.
What does the Hyundai Sonata check TPMS mean?
A Hyundai tire pressure monitoring system, often known as a Hyundai TPMS, is an electronic device that checks the tire pressure in a vehicle and immediately alerts the driver if the tire pressure is too low or too high.
Is my car safe to drive with the TPMS light on?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
Where is the Hyundai TPMS reset button?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
The significance of a steady TPMS light
It usually indicates that one or more tires need to be inflated to the recommended placard pressure if the TPMS warning light glows solidly and stays solid.
The TPMS system, however, is malfunctioning if a light flashes for 60–90 seconds before going solid. Most likely, there is a communication problem between the vehicle and one or more of the sensors. Many different problems may be the root of this. The sensor may need to be changed if it is broken, missing, or has a dead battery, according to the flashing light. It can also imply that the tire’s sensor is placed incorrectly.
You must investigate these potential problems until you identify the source if you want to ensure that you service the TPMS systems correctly.
When your customer visits for servicing, bear in mind the following extra advice:
Every time a customer’s car pulls into your service bay, check the Telltale/MIL and note the presence of any lit or blinking lights before starting any work.
Visually check the stems, hex nut, seal, and cap while servicing the TPMS. Replace with a fresh service kit is the advised best practice.
Whether or not there is a chance for a sale, always let the customer know the advantages of TPMS.
Why does the TPMS light turn on?
Although it is a device that can help notify you when pressure is low, a tire may deflate below the recommended level of inflation long before the TPMS warning light illuminates. When the tire pressure is either too low or too high, the TPMS light illuminates.
What pressure causes the TPMS light to illuminate?
The tires on your car increase traction and fuel efficiency. They must be adequately inflated because of this. You can monitor tire pressure from the driver’s seat with your tire pressure monitoring system (TPMS) and drive safely. Find out more about TPMS and how to make sure it’s operating properly.
The TPMS was put into place by the US Department of Transportation (DOT) as a component of a Federal Motor Vehicle Safety Standard. The majority of vehicles produced after 2008 with a gross vehicle weight rating of 10,000 pounds or less are required to include a TPMS.
When a tire’s pressure drops by 25% below the suggested level, the TPMS warns drivers. For instance, if the recommended pressure for your tires is 32 pounds per square inch (psi), the TPMS dash light will activate when the tire pressure exceeds 24 psi.
For safe driving, proper tire pressure is crucial. Your risk of skidding, hydroplaning, losing control, or being in an accident increases when your tires are underinflated because they can’t adequately grip the pavement. Even if you have full coverage insurance, having properly inflated tires will help you stop in heavy traffic, keep your balance on slick terrain, or avoid unexpected road debris. Additionally, proper inflation increases your car’s fuel efficiency and extends the life of your tires.
Direct or indirect tire pressure monitoring systems are available for vehicles. Both types alert the driver when the tire pressure drops by turning on the dash light.
Direct: uses a connected pressure sensor to the wheel inside the air chamber to operate.
indirect: compares the rotational speed of the tires using the anti-lock braking system.
The cross section of a tire with an exclamation point in the middle can be seen when the TPMS light is on. When it flashes, respond immediately and fill your tires with the necessary amount of air. This information can be found in the owner’s manual or on the driver’s side doorjamb.
Understand that a change in the ambient temperature may be to blame if you observe that the TPMS light flashes on and off occasionally. When the temperature in your car varies by at least ten degrees, the tire pressure can fluctuate by one or two psi. The TPMS light may not fully illuminate in these circumstances, but your tires still require air as quickly as possible.
The TPMS system in your car can be maintained using the equipment that your mechanic has. Your technician will check the TPMS and sensors to make sure they are functioning properly during your yearly vehicle inspection or when your tires start to show wear or uneven tread. As well as recommending extra maintenance throughout the year, he or she can replace the sensor batteries, the nickel-plated valve stems, the rubber grommet, and the locking ring.
You can also ask for assistance from your knowledgeable vehicle insurance agent. At Newins A Abana Auto Insurance, we can assist you in finding a skilled mechanic to fix your TPMS as well as the necessary insurance for your car. We focus on keeping you and your loved ones safe while providing full coverage insurance.
Can the TPMS activate the check engine light?
Your automobile, truck, or SUV’s check engine light could turn on for a plethora of different causes. The light may turn on due to a broken sensor, low tire pressure, low transmission fluid, and many other things. However, some of the more frequent causes for the check engine light to appear. When the light lights, it doesn’t always indicate an expensive repair; in certain cases, the problem can be resolved with a simple wrist movement. Here are four typical causes of the check engine light, and for an accurate diagnosis, make sure to take your car to your neighborhood mechanic.
How long is it safe to drive with the TPMS light on?
Low tire pressure makes the situation worse because it is more difficult to gain traction and roll ahead. Under these circumstances, avoid driving with low tire pressure for more than 40 miles or more than 30 minutes.