Your Hyundai Elantra’s TPMS light turning on indicates that one of the tires has low pressure. Tire pressure monitoring system is referred to as TPMS. When this light illuminates, you should inspect each tire to make sure there are no noticeable holes, screws, or nails in them. Then, as instructed on the sticker on the driver’s door jamb, you should inflate the tires to the recommended PSI. Pressing and holding the TPMS button on the dash will reset the system and turn off the light after all the tires have been inflated. To avoid uneven tire wear, it’s crucial to maintain your tires inflated.
The tire pressure monitoring system (TPMS) light on a Hyundai Elantra indicates that one of the tires has low air pressure.
In This Article...
Where Is The Hyundai Elantra’s TPMS Reset Button?
Your Hyundai Elantra’s TPMS light might not go out right away if you just filled the tires. The tire-pressure reset button must be located first if the TPMS on your Hyundai Elantra has to be reset.
All American-made automobiles must have direct or indirect TPMS systems fitted as of 2008 as a result of the TREAD Act’s 2007 mandate.
Hyundai produces the Elantra, Elantra GT, and Elantra Touring with a direct TPMS system. If one or more tires on a direct TPMS system indicate low tire pressure, the TPMS sensors will communicate this information to the vehicle’s ECU. Each tire pressure or an indicator light (low-line TPMS system) will be displayed on the dashboard (high-line TPMS system).
2009–2017 TPMS Tip Featured Elantra, Elantra Coupe, and Elantra Touring from Hyundai
Mitchell 1 contributes TPMS knowledge to Modern Tire Dealer, a highly regarded journal that produces editorial content targeted at independent tire dealers. This story is being shared on our blog along with a link to the Modern Tire Dealer website, where you may read it in its entirety. The TPMS information in this page can also be found in our ProDemand(r) auto repair information software’s reset procedures tab, along with other crucial reset procedure information for the chosen car.
NEED FOR SPECIAL TOOLS? Yes, a TPMS module on a Hyundai GDS (Global Diagnostic System).
The 2011–2017 Hyundai Elantra, 2014 Elantra Coupe, and 2009–2012 Elantra Touring all have tire pressure monitoring systems (TPMS) that use wheel-mounted tire pressure sensors to keep track of the air pressure in the four road tires. The system accomplishes this by using a receiver, four radio frequency (RF) tire pressure sensors, two warning lights on the instrument panel, and a data circuit.
The low pressure warning light on the instrument cluster will turn on if tire pressure falls below the permitted threshold or if a quick leak is discovered. The TPMS warning indication will be illuminated if the system discovers a fault with the receiver or sensor, or if it discovers a defect that is external to the receiver or sensor. The light will remain on during the whole ignition cycle if the issue is deemed “important.”
There are two operating modes for the tire pressure sensor: stationary/rolling mode and sleep mode. The sensor will record temperature and pressure every four seconds while measuring acceleration every 60 seconds in the stationary/rolling mode. To save battery life, the sensor enters a low current consumption state during sleep mode and stops taking measurements. When new, all sensors are in this condition. The sensor won’t communicate unless the commence command asks it to or the speed of the car reaches 20 mph (32 km/h).
All tires must have their air pressure checked and changed to the specified cold pressure mentioned on the vehicle certification label (located on the driver’s door or door pillar) when the low tire pressure warning light illuminates. Repair the tire as necessary if it has been damaged. Make sure the alarm light is turned off (this may take up to four minutes if the tire is not rapidly re-inflated). Check the tire pressure again if the warning light remains on. Turn the wheel a quarter turn and wait another four minutes if the tire pressure is satisfactory (the sensor may be in an RF null). There is a TPMS issue if the Hyundai Elantra tire pressure light is still on or the TPMS warning indicator is lighted.
NOTE: It must be started if the tire pressure sensor is replaced. Rotation of the wheels and tires has no impact on the TPMS. Check the air pressure in each tire and make any necessary adjustments when the low tire pressure warning light illuminates.
Answers
the TMPS light you have (tire pressure monitering system) If it is solid, your pressures are typically low (less than 4 psi low or higher than 6 psi). If that light is flickering, then the onboard computer is unable to read one or more of your sensors. If it doesn’t go off right away or after a short drive, check all of your tire pressures. Then, go to a Dunn Tire/Pep Boys/Dealer and ask them to reset it for you using their computer.
light. It occasionally blinks. The blinking will occasionally begin while I’m driving or when
begins but is inconsistent. It briefly blinks before becoming steady. I’ve delivered it to
the dealer three times, and each time they reset it for me, leaving them in the dark about
The caution light on my 2016 New Hyundai Elantra GT turned on. There is a warning light next to the tachometer. The Hyundai Elantra GT Manual does not have it. Can someone please explain what that might be. Please assist. via Mary
Adshin My father explained to me that this symbol indicates that the weather is below average. No cause for concern. All the best with the car. I enjoy using this car a lot.
A light that looked like an engine came on in my 2013 Hyundai Elantra Limited. I don’t know
My Elantra is a 2015 model. My tire light illuminates. I inflated every tire. I had
How can the TPMS light be turned off on a Hyundai Elantra?
Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the engine and give the sensor 20 minutes to refresh. Under the steering wheel is typically where you’ll find the TPMS reset button.
What does the Hyundai TPMS symbol mean?
A Hyundai tire pressure monitoring system, often known as a Hyundai TPMS, is an electronic device that checks the tire pressure in a vehicle and immediately alerts the driver if the tire pressure is too low or too high.
How do you turn off the Hyundai’s TPMS light?
The key should be in the “On” position if you don’t start the vehicle. Holding down the TPMS reset button should cause the light to blink three times. Start the vehicle and let it run for 20 minutes to reset the sensor.
Is my car safe to drive with the TPMS light on?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
The significance of a steady TPMS light
It usually indicates that one or more tires need to be inflated to the recommended placard pressure if the TPMS warning light glows solidly and stays solid.
The TPMS system, however, is malfunctioning if a light flashes for 60–90 seconds before going solid. Most likely, there is a communication problem between the vehicle and one or more of the sensors. Many different problems may be the root of this. The sensor may need to be changed if it is broken, missing, or has a dead battery, according to the flashing light. It can also imply that the tire’s sensor is placed incorrectly.
You must investigate these potential problems until you identify the source if you want to ensure that you service the TPMS systems correctly.
When your customer visits for servicing, bear in mind the following extra advice:
Every time a customer’s car pulls into your service bay, check the Telltale/MIL and note the presence of any lit or blinking lights before starting any work.
Visually check the stems, hex nut, seal, and cap while servicing the TPMS. Replace with a fresh service kit is the advised best practice.
Whether or not there is a chance for a sale, always let the customer know the advantages of TPMS.
Where is the Hyundai TPMS reset button?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
Why does the TPMS light turn on?
Although it is a device that can help notify you when pressure is low, a tire may deflate below the recommended level of inflation long before the TPMS warning light illuminates. When the tire pressure is either too low or too high, the TPMS light illuminates.