The majority of the dashboard lights are intended to serve as warnings of some sort, so seeing the EPS light turn on may cause you to get concerned. Your anxiousness can rise if you notice this light and a decline in steering ability. Driving your automobile becomes more challenging, and if you’re not used to manual steering, you can find this to be a very unpleasant experience.
When there is a problem with the power steering system, the EPS (electrical power steering) light will illuminate. But when the car is started, the light turns on briefly, just like other dashboard warning lamps. Only when a light is on for an extended amount of time does it signal a problem.
If the system is switched off, the lights can also turn on. Therefore, if you see the EPS light on, make sure the system is off. If it is, there is a button in the center console that you can use to quickly switch it back on.
In This Article...
Suitable Services
Hi Don. I appreciate you asking this question tonight. Your Hyundai Elantra’s EPS light is a warning light that signifies a problem with the electronic power steering system. The ignition and fuel systems will be turned off as a safety measure if the problem is severe enough, although in most circumstances it has no effect on the vehicle’s ability to start. A warning light inspection would be necessary to determine what is responsible for this light.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Electronic power steering (EPS) system warning light on a Hyundai Elantra
When the ignition key is turned to the ON position, this indicator light turns on.
When the EPS requires maintenance, this light also illuminates. If it starts while you’re driving,
the ACC or LOCK position of the switch, the key reminder caution chime will play. This aids
How do I turn the Elantra EPS light back on?
Turn the ignition switch off before turning it back on. The EPS indicator illuminates for approximately 6 seconds. Turn the steering wheel 45 degrees to the left from the straight-ahead driving position within 4 seconds of flipping the switch ON, and hold that position until the EPS indicator turns off.
The torque sensor diagnostic logic in the EPS system may be vulnerable when the vehicles are started, leading to the setting of an inaccurate diagnostic code, according to an examination of warranty claims made to dealers. The system then switches by default to manual power steering, which unintentionally makes steering harder.
There is no illumination of the EPS warning light. The moment the ignition switch is turned on, the steering becomes difficult to maneuver. This occurs as the EPS system diagnostics are run by the system. The steering wheel will function normally once the diagnostics are finished.
catherinel24
I recently brought my vehicle to the Hyundai shop for a diagnostic checkup. The EPS indicator was lit. They informed me that since the 2010 Hyundai Elantra model includes an angle sensor, I would need to replace the complete steering column. They also informed me that I couldn’t buy this sensor on its own. To rectify this, they want to charge me close to $3,000. That sort of money is not mine.
Anyway, I was curious about your thoughts. Is it truly necessary to replace the steering column in its whole for a single sensor, or can the issue be resolved by buying just the sensor? He helped me realize that I needed to change everything, but I don’t have confidence in their opinion.
What causes a 2010 Hyundai Elantra’s EPS light to illuminate?
I’m here. The electronic power steering light on the dashboard will turn on when a trouble code related to that system has been recognized by the ECU. If you aren’t having any physical driving problems, the problem can be as simple as the connection being loose or the sensor being destroyed. However, to find out what’s triggering the light and get repair recommendations, you might want to hire a qualified mobile mechanic to visit your area.
EPS on my 2010 Hyundai Elantra: What does that mean?
The issue: According to Hyundai, the electronic control unit (ECU) in the electronic power steering (EPS) system may malfunction. The ECU may specifically calculate the torque supplied to the steering wheel incorrectly. Because of this, the system can switch to manual mode and stop providing steering assistance, making it challenging for the driver to turn the steering wheel.
Number of Vehicles at Risk: Hyundai is recalling 204,768 vehicles, with an estimated 3% of them having the problem. Model years 2008 to 2010 Elantra cars built between June 1, 2008, and April 30, 2010, are included in the recall. Elantra Touring hatchbacks made between November 1, 2008, and April 30, 2010, model years 2009–2010, are also impacted.
How can a Hyundai Elantra’s EPS light become reset?
Restart your automobile after turning it off. The dashboard’s lights briefly turn on for a brief period of time. 4 seconds after the lights turn on, while the EPS light is still on, turn the wheel 45 degrees to the left and hold it there until the EPS light turns off.
The light usually goes out by restarting the computer. But if the light stays on, there might be a more serious issue at hand. Then, a more thorough investigation must be made.
What does my car’s EPS stand for?
The car can still be driven even if the engine is off or the power steering system fails, although it will need more effort.
The power steering control unit measures the torque of the steering wheel and the speed of the vehicle to order the EPS.
As the vehicle’s speed grows, the steering effort gets harder, and as it slows down, it gets easier.
Have the system checked by a professional if you detect any difference in the amount of effort needed to steer during routine vehicle operation.
a skilled workshop. Kia advises customers to go to a licensed Kia dealer or service provider.
While driving normally, the following signs could appear:
Immediately after turning the ignition switch on, the steering effort is significant. This takes place as the EPS system completes the
diagnostics. The steering effort will revert to normal after the diagnostics are finished.
The EPS relay may make a clicking sound while the ignition switch is in the ON or LOCK position.
When the car is stopped or moving slowly, you could hear motor sounds.
For the purpose of preventing fatal accidents, steering assistance is used when an anomaly in the electric power steering system is discovered.
The functions will halt. The warning light on the instrument panel turns on or blinks at this point, and the ability to control
There won’t be steering. Please check as soon as you move the car to a secure area.
If the steering wheel is continuously turned while the car is stationary, the steering effort increases. To be sure, after
The alert light will turn on in the instrument cluster if the electric power steering system is not functioning properly.
It could become challenging to manage the steering wheel or behave strangely. In this scenario, get an expert to inspect the system.
Unusual sounds may happen when you handle the steering wheel in a cold environment. The noise will end as the temperature rises.
Can a car be operated while the EPS light is on?
I’m here. You should be able to continue driving your Hyundai until your appointment as long as there are no adverse side effects and you feel it is safe to steer. Thank you for your inquiry!
Hello, and I appreciate your letter. The EPS (electric power steering) warning light indicates a problem with the system that the computer has identified. Your technology differs from conventional power steering systems in that it does not use fluid and gears. That could indicate a problem as minor as a filthy electrical connection, serious as a faulty sensor, as minor as a whole system failure. You can assess the problem’s seriousness the best. Do you experience any power steering problems? Has the steering grown more difficult or jerky, or does the system make any odd noises? If not, it is probably safe to drive the car for brief, modest distances. Remember that the problem could get worse and turn into something that could leave you stuck. Of course, there is a serious safety problem here.
When the EPS light illuminates, what does that mean?
Indicator for electric power steering (EPS) What does it mean? It means either your vehicle’s power steering fluid levels are low or there is an issue with your electronic power steering. To find out if your fluid levels are low, check them. Take your automobile to a mechanic to have it diagnosed if that isn’t the issue.
How can I have my car’s EPS fixed?
Vehicles without hydraulic power steering will activate the EPS system, which stands for electric power steering. The steering angle sensor provides data to the EPS system’s control module rather than hydraulics. To offer power-assisted steering, this in turn regulates the steering motor.
It could be more challenging to identify the issue if the EPS warning light illuminates in your car because you won’t have any fluid levels to check.
You should thoroughly inspect all of the connections to the battery to look for any signs of wear or damage because it may occasionally be caused by a problem with the battery or alternator.
You may also experience an EPS light problem if you recently needed to jumpstart your car or if you disconnected the battery.
Sometimes the issue might be resolved by simply turning your car on and off again. Even if this works, you should still have your car checked at a nearby garage because there might be a deeper problem.
Can EPS prevent a car from starting?
My old automobile had hydraulic power steering; my current car has electric power steering. If I have electric power steering, should I be worried about problems with my car not starting?
In less than two minutes, find out if your auto insurance is being overcharged.
Technically speaking, the electric power steering has the ability to stop the car from starting. Electric power steering, unlike hydraulic power steering, draws its energy from the battery, and if it uses too much of it, your car might not start.
You should have your battery checked out right away if your car won’t start because the electric power steering is using too much of the battery’s energy. After all, your car’s battery powers all of its electrical systems, not simply the power steering system.
Finding the greatest bargain on auto insurance doesn’t have to be difficult, even though troubleshooting automotive problems can be frustrating. Join the Jerry app right away.
Jerry is an app that performs the duties of a certified broker by gathering and evaluating quotations from the best national insurance providers so you don’t have to.
Every time your policy is up for renewal, Jerry will send you new quotations, ensuring that you always have the coverage you need at the lowest possible cost. Jerry will gather and examine all of the data from your current insurance in less than 45 seconds to find you the best quotes at the best price.
What leads to EPS failure?
The mounted electric motor may malfunction in today’s computerized power steering systems. The failure modes are particularly likely to be caused by the motor becoming overheated. EPS failure will also probably result from water, dirt, or other contaminants getting into the system environment. Additionally, carbon contamination may cause steering failure in brush style systems exclusively. Brush type generally has a higher failure rate than brushless.