If your Hyundai Sonata’s check engine light begins to flash, the issue requires immediate attention, and your Hyundai should be taken in right away. Usually, a serious engine misfire that causes unburned fuel to escape into the exhaust system is indicated by this blinking light.
In This Article...
SERPRESULT
The check engine light alerts drivers to problems ranging from loose gas caps to more serious failures like a damaged catalytic converter or a malfunctioning ignition switch.
The check engine light never goes off: The onboard diagnostic system of your car has identified a problem that needs to be rectified.
The check engine light may be illuminated or blink depending on your vehicle’s make and model.
Why does my 2015 Hyundai Sonata’s engine light come on?
Your 2015 Hyundai Sonata’s check engine light should only blink if an urgent fix is required, so you should bring your Hyundai in right away. Usually, this blinking light denotes a precise engine misfire that allows unburned gasoline to escape into the exhaust system.
I have a Hyundai, can I drive it with the check engine light on?
A constant glow normally denotes something less serious, but a check engine light that flashes suggests your car’s engine is seriously damaged and needs quick repair. We strongly advise avoid driving your Hyundai if the check engine light is flashing, and book Hyundai servicing right away.
What causes the Hyundai engine light to illuminate?
What Sets Off the Check Engine Light on a Hyundai? In general, the Hyundai check engine light acts as a “catch-all” to inform you when your car needs maintenance. It could start as a result of a serious problem or just because your gas cap is unfastened.
AutoZone’s check engine light is present?
AutoZone scans check engine lights, right? AutoZone can identify codes from the check engine light, yes. If you’re unsure of why your engine light came on, visit your neighborhood AutoZone so that one of our staff members can use our free Fix Finder service to identify the problem.
Why is the check engine light yellow?
Depending on the issue, if the check engine light comes on, it may flicker or be on all the time. A issue that requires immediate attention is indicated by a blinking light, or in some cars, a red light instead of a yellow or orange light. In either case, you ought to have the car looked at by a mechanic.
An engine misfire that is severe enough in late-model cars to send unburned fuel into the exhaust system, where it can quickly destroy the catalytic converter and necessitate an expensive repair, is typically indicated by a blinking light. If that occurs, you should turn down the engine and get the automobile or truck checked out as soon as you can.
Even if there is no immediate danger if the light is steady, you should make an appointment as soon as feasible. Even while your fuel mileage may be declining and your vehicle may be spewing unsafe amounts of hydrocarbons and other pollutants, you might not notice a decline in performance since modern automotive systems frequently try to adjust when there is a problem.
According to Jim Collins, a national training team leader for Ford Motor Co., “The customer is really, in the long run, potentially hurting their pocketbook by leaving that light on and ignoring it.” The car’s computer may in some severe circumstances lower power for you in an effort to lessen the likelihood of damage.
Here are some recommendations on what you should do if the check engine light illuminates:
- Search for a critical issue that need quick action. Look for any warning signs of low oil pressure or overheating on your dashboard in the gauges and lights. These circumstances call for you to stop and turn off the engine as soon as you can find a secure location to do so. On some cars, a yellow check engine light indicates troubleshoot, while a red one commands immediate stopping.
- Possibly tighten the gas cap. This frequently makes the issue go away. The light might not reset for a while, so keep that in mind. Some automobiles feature a secondary indicator that sounds when the gas cap is loose.
- Reduce the load and speed. Reduce your speed and make an effort to lessen the demands on the engine if the check engine light is on or you notice any major performance issues, including a lack of power. For instance, it would be wise to put an end to hauling a trailer. Get the car evaluated as soon as you can to avoid costly damage.
- If any built-in diagnostic tools are available, use them. Many contemporary vehicles feature built-in remote diagnostic capabilities that allow for reporting on fault codes and scheduling an appointment for service. Today, numerous automakers offer remote diagnostics and the option to book a service appointment, including Fiat Chrysler, Ford, Hyundai, Jaguar/Land Rover, and Volvo.
When the check engine light comes on, what should you check first?
1) Examine your gauges for any signs of low oil pressure or overheating in your car. Turn off your car if either of these problems is present to stop further harm.
2) Check the battery and charging system for damage. If the battery dies, your car will not start.
3) Inspect the fan, alternator, and serpentine belt. These parts are all essential to your car’s charging system. Regular oil changes should always include a belt inspection, which ABS Unlimited always performs.
Make sure there is a connection and that it is free of corrosion or wear by inspecting all cables to ensure that adequate connections are kept.
Maybe there’s no need for concern? Your check engine light will also come on if your gas cap is unsecured. Tighten the gas cap if you recently purchased gas. Try turning the car off, tightening the gas cap once more, and then turning it back on to see if the check engine light goes out right away. Resetting the sensor can occasionally take more than one attempt.
How can I tell if the check engine light on my car is serious?
Whether the check engine light is steady or flashing, its significance can change.
An issue has been discovered when the engine check light is both solid and flashing. But if your engine check light is flashing, there is a significant issue that needs your immediate attention. To avoid severe damage, it is best to call a professional as soon as you notice a flashing light.
When a situation is critical, the engine light may not blink in some automobiles. If an important problem has been found, red or orange will display in place of yellow on the light.
Bottom line: Whether the check engine light is solid or flashing, you should always have your car diagnosed and fixed. A flashing light signals an urgent situation that need immediate attention. Seek a mechanic’s assistance as soon as you can to protect your car and prevent expensive repairs.
What do the check engine light codes mean?
- P0171-P0175 codes are related to measuring your oxygen levels.
- P0171: This error number informs you that your engine is either receiving too little or too much air, indicating that your system is too lean.
- P0172: This error number denotes a rich system, which means that the engine has too much gasoline and insufficient oxygen.
- The engine control module sets the code P0173 when it detects an excessively rich or lean air-to-fuel ratio. This can be balanced out by the engine control module, but if the compensation is excessive, the code will be set.
- P0174: This error number informs you that your mass air flow sensor is underreporting. In other words, your sensor is actually detecting considerably less air entering the engine than it actually is.
- P0175: This error number denotes a rich system, which means that the engine has too much gasoline and insufficient oxygen. A mechanic will need to determine a specific cause for the code to be activated because this can happen for a number of different causes.
- P0300-P0305 codes: address engine misfires
- P0300: When there is an engine misfire involving numerous cylinders, this code will be set.
- P0301: This error number denotes a cylinder 1 engine misfire.
- P0302: This error number denotes a cylinder 2 engine misfire.
- P0303: This error number denotes a cylinder 3 engine misfire.
- P0304: This error number denotes a cylinder 4 engine misfire.
- P0305: This error number denotes a cylinder 5 engine misfire.
- P0411, P0440, P0442, P0446, and P0455 are codes that relate to evaporative systems.
- P0411: This error message will show up if the secondary injection system detects an improper flow.
- P0440: When there is a leak in the fuel tank vapor system or a vapor pressure sensor malfunction, this code will show up.
- P0442: The evaporative emission control system is malfunctioning, according to this code. Usually, this code appears with other evaporation system codes.
- P0446: This indicates a problem with the vent circuit for the evaporative emission control system.
- P0455: This error number denotes an emission control system leak. The gas cap is a good spot to start looking first. A malfunctioning vent control valve is another typical explanation for this leak.
- Code: P0401: Address recirculation of exhaust gases
- P0401: This indicates that there is insufficient flow in the exhaust gas recirculation system.
- P0420: This error code indicates that the oxygen (O2) sensors are malfunctioning or that the catalytic converter is not operating at maximum efficiency.
- P0430: This code is more generic and denotes that the catalyst system is having issues. This code is highly generic, therefore it frequently coexists with oxygen sensor and misfire codes.
What causes the check engine light to appear most frequently?
The oxygen sensor is the same way. This important component measures the amount of unburned oxygen present in your car’s exhaust, and if there is too little or too much, it may harm other engine components. Every time an oxygen sensor fails, a check engine light will come on. In fact, it’s among the most frequent causes of a check engine light appearing while you’re operating your car.
Will the check engine light automatically turn off?
If the problem that caused the check engine light to come on is fixed, the light will go out automatically. Consequently, if your converter is subpar and you frequently drive in stop-and-go traffic, which puts a lot of strain on the converter, it may have caused the check engine light to come on.
The orange engine light: what does it mean?
engine management light that flashes An engine misfire, for example, would be a problem indicated by a flashing orange light on the dashboard. Your car may start to tremble, or the engine may sound strangely at first.
How critical is a solid check engine light?
The Check Engine Light may illuminate either continuously or intermittently. They have two distinct meanings.
When the engine light flashes while it is on, there is an urgent problem. Find a secure location to stop your car, then turn it off. Perhaps you could think about having it towed to the shop. To prevent damage to your car, a specialist needs to identify the issue as soon as possible. A severe issue arises when the check engine light flashes.
Even though there may still be cause for concern if the engine light remains steady, you don’t need to panic right away. A solid Check Engine Light may signify a simple issue, such as a loose gas cap, or it may point to a more serious issue, such as a fuel, timing, or transmission problem. Although there isn’t the same urgency as if the light were flashing directly at you, have your car looked at.