Press the lock button on your key fob while holding down the remote start button to activate the remote start function for your Hyundai Elantra. Alternatively, utilize the Blue Link Remote Package and your smartphone. When your parking lights flash, you’re all good to go! A
Sometimes getting into your car is about the last thing you want to do, whether it is 115 degrees and sunny or 15 degrees and snowy. Thankfully, technology has saved the day! You may start your Hyundai remotely in advance and start your commute without risking burning your hands or freezing your buns thanks to this feature. A
In This Article...
How to use the Hyundai key fob’s remote start
It could initially seem self-explanatory. Your key fob has a remote start button, but using it doesn’t just involve pressing a button. You must lock the doors with the key fob before pressing the remote start button (even if the doors are locked already).
Hold the remote start button after locking the door for 4 seconds. Holding the button down for at least two seconds is necessary for it to function. Your Hyundai’s parking lights will blink in response to each command.
The heating and cooling systems in your Hyundai will operate until the pre-set temperatures once it is started. If no additional action is taken after 10 minutes, the car will again switch off. The car will turn off once again if you press the remote start button once more.
How does a Hyundai use remote start?
By simultaneously pushing the Lock and Remote Start buttons within three seconds, the Remote Start feature can be used. Your Hyundai will be inspected by the system to determine whether it is safe to start it. If it is, the engine will start after 5 seconds and run for up to 15 minutes. To turn off the engine, press and hold the Start button once more for two seconds.
Climate Control and Remote Start
A subscription to Bluelink Remote Package is necessary. Only automobiles with an automatic transmission or a dual clutch transmission that are equipped with push button start are eligible for remote vehicle starting. Not offered on all trims and models. Use Remote Start only if it is secure to do so.
With only a few taps on the app or a simple command to Alexa, you can remotely start your Hyundai’s engine, adjust the temperature inside, and turn on the defroster.
How is a 2020 Hyundai Elantra remotely started?
The ONLY completely plug-and-play remote start solution for the Hyundai Elantra from 2017 to 2020. Most consumers can complete the installation process in under an hour. To start your Hyundai Elantra after installation, simply press the lock button on your original remote control three times. If the factory remote’s range is insufficient, you can also purchase one of our choices with a longer range when you check out. This kit now contains TAKEOVER, so when you open the door, the car won’t turn off and you may hop in and drive!
- Complete Kit includes ALL required parts.
- includes instructions for installation.
- Easy, straightforward, PLUG & PLAY installation
- Easy to install, requires no cutting or splicing
- These kits, sold in the thousands, are excellent!
- Hyundai Elantra, model years 2017–2020
- Your VIN #’s tenth letter must be an H, J, K, or L.
- Push-start ignition is required.
- Unable to work with key start
- Power locks and keyless entry are required for the vehicle.
- only an automatic transmission.
Plug and play installation was completed on the passenger side beneath the dash and glove box, and one t-harness was installed at the headlight switch on the driver’s side. NO cables need to be cut, spliced, etc. during 100% Plug & Play installation.
Your present OEM remote’s lock button must be pressed three times in order to start the car.
Your present OEM remote’s lock button must be pressed three times in order to STOP the vehicle.
If you don’t get out and get in, the vehicle will run for 15 minutes before shutting down.
Simply get inside and depress the brake to take control of the vehicle after remote starting. After that, you can start driving without having to shut down or restart the car.
- Simply press LOCK three times on your factory remote to activate the remote starting. 3x Lock From OEM Fob Only = No Additional Remotes to Carry.
- 1-Way 1500ft = Includes two 1-button remote controls with a range of up to 1500 feet, plus a third lock from the OEM fob that also functions.
- 3-way lock from OEM fob will also function. 2-way 3000 ft = Includes (1) 1-button 2-way remote and (1) 1-button 1-way remote for up to 3000 ft range.
- Start your automobile from anywhere in the globe with an app on your phone. Service Plan is necessary upon purchase or installation. Free for the first year, then $39.95 per year. (3x Lock will also function)
- Full House = You get everything! Use the 2-way 3000ft remote control, your smartphone, or your OEM key to start your vehicle from anywhere in the globe. Press lock three times. After purchase or installation, a service plan is required for the smart phone module. Free for the first year, then $39.95 per year.
Is remote start available on the 2022 Elantra N?
You may remotely start your Elantra N’s engine, unlock or lock the doors, control the temperature inside the vehicle, and more using a smartphone, smartwatch, or home assistant device.
The Hyundai Elantra SEL is equipped with remote starting, right?
It does, indeed. Simply make sure your car is correctly connected to the BlueLink Connected Vehicle System and that the software has been downloaded and set up on your phone. With the help of this app, you can remotely turn on the heater and start your Elantra so that everything is ready to go when you step outside.
How can I tell whether the remote start on my Hyundai is working?
If your car has a remote starter, the owner’s manual will have information about your unique remote starter and how it functions. To see if this feature is present, look in the manual’s index.
Listed below are few well-known automobiles with a factory remote start option:
- Accord, Civic, and Insight from Honda
- GM automobiles (2003 – later)
- Honda Accord
- ZDX and TLX Acura (2010 – later)
- Tribeca, Legacy, and Outback Subaru models (2007 – later)
- Navara Altima
- Fusion and the Ford Mustang
- Corvette Camaro
How does the Hyundai command start function?
By pressing the button twice in quick succession on your remote control transmitter, you can use the remote start feature.
Has the 2022 Elantra a push-button ignition?
A proximity key fob with push-button start and hands-free trunk release, driver auto-up power window, and dual-zone automatic climate control are further features of the 2022 Hyundai Elantra SEL ($21,100).
Can I use my phone to start my Hyundai?
Using your Android smartphone and the Hyundai Digital Key system, you may unlock and start your car. This article will walk you through the setup and usage of the Digital Key system if your Hyundai has it.
The following are the requirements for setting up a Hyundai Digital Key:
- a smartphone running Android. The Digital Key system is currently only compatible with Android phones. The phone needs to fulfill the following criteria:
- Android 7.0 or later operating system
- 4.0 or later for Bluetooth
- Near-Field Interaction (NFC)
NOTE: The utilization of Digital Key capabilities will be restricted if the device only supports NFC or BLE.
You have signed up for the Hyundai Digital Key service and have a MyHyundai account. The link between your phone and the Vehicle Identification Number of your automobile is formed through MyHyundai (VIN). Make sure your new Hyundai is listed in the car list if you are presently a MyHyundai member and it is equipped with a Digital Key.
Install the Hyundai Digital Key app on your phone after downloading it from Google Play.
with the aforementioned factors covered. The first step is to launch the Digital Key app and follow the on-screen instructions to enter the necessary data. The 4-digit PIN for your MyHyundai account will also be used by the Digital Key app.
Hyundai: Does remote starting nullify the warranty?
No. The Magnuson Moss Warranty Act forbids auto dealers from altering or nullifying your vehicle’s warranty if you elect to add aftermarket equipment to your car. Therefore, installing a Compustar aftermarket remote starting on your car won’t have any impact on the manufacturing warranty at all.
How can I tell if my car has remote starting from the factory without a key?
How can I tell if my secondhand automobile has a remote start built in from the factory? I’ve only had this car for a short while, and I still don’t know how to use it.
In less than two minutes, find out if your auto insurance is being overcharged.
Learning how to use a new car’s many special features might be challenging! There are a couple ways to find your car, though, if it has a remote start.
The key fob itself serves as the initial location. The key fob should feature the following buttons:
- Lock your car.
- Lock the vehicle
- Crack the trunk.
- start the vehicle
Look in the glove box for the user manual if you can’t find a start option. Used automobiles frequently include the original owner’s manual.
Another choice is to take note of the VIN from your auto insurance or window sticker and use it to look up various characteristics. Try using a website like Carfax, which provides a list of vehicle characteristics connected with the VIN.
In the worst case, call the dealership. The dealer will have information about the caras features and can give you instructions on how to use them.
Spend some time looking into your auto insurance to make sure you are still getting the greatest bargain when you are looking into your car. The Jerry app can be downloaded to help! Every six months, Jerry’s licensed agents automatically check your policy and, if they discover that you are overpaying, they send you a free estimate right to your phone.
Blue Link Remote Start: What is It?
With the Remote Package, you may easily access functions using a web browser or mobile app. You can locate your car if you can’t remember where you parked it, use remote climate control (if it has it), open or lock your doors, or remote start your car.
Every key fob has remote starting, right?
If you spot a button with a clockwise-moving circular arrow, you’ll know it’s there. That is the remote engine start button, though the key fob itself does not have a label for it. For those who are already familiar with this button’s use, it involves hitting the lock button first, then the remote engine start button. No problem, isn’t it? Other key fobs include a button in the same location, but they have a different sequence for remotely starting the engine. For instance, Ford key fobs have the same circular arrow emblem with “2x” inside the circle (other key fobs are labeled “X2,” which implies the same). This informs you that in order to remotely start the car’s engine, you must click the button twice. This button is frequently seen in many key fobs, therefore it’s not really thought of as a hidden feature. However, certain automakers, primarily BMW, have introduced redesigned key fobs without the button. However, this does not imply that these key fobs lack these functionalities merely because there isn’t a circular arrow button to click. By rapidly pushing the “lock” button on the key fob, one can remotely start an engine in a new BMW by doing so. You don’t need to become daring and try out this sequence to test if the engine activates after pushing the lock button three times in a single second if your key fob has the circular arrow button. However, if it doesn’t, it won’t harm to try it out and see if it manages to complete the task in some way.